Well ... i'm having same issues also on 3.17.x and 3.4.x, i can run analog tv only on 3.2 ( debian wheezy's stable) 2014-11-06 9:20 GMT+01:00 Michal B <developer.m3@xxxxxxxxx>: > Well ... i'm having same issues also on 3.17.x and 3.4.x, i can run analog > tv only on 3.2 ( debian wheezy's stable) > > Dňa 6.11.2014 9:09 používateľ "Malcolm Priestley" <tvboxspy@xxxxxxxxx> > napísal: > >> On 06/11/14 06:51, Michal B wrote: >>> >>> Hi, >>> >>> analog TV on Hauppauge HVR 900 [2040:6500] - audio works correctly but >>> video stops after few samples, audio continues after video stop, >> >> H Michal >> >> Yep, pretty much the same for all 3.18 and rc3 >> >> One of my systems freezes the other no video. >> >> All the drivers appear to be doing the same. >> >> 3.17.2 is fine. >> >> It appears to be a video overlay problem, only start to panic if at rc6 >> >> Regards >> >> >> Malcolm >> >>> >>> tested: >>> >>> mplayer tv:// -tv >>> >>> norm=PAL-BG:freq=687.5:input=0:device=/dev/video0:alsa:amode=1:adevice=hw.2,0:audiorate=48000:forceaudio:immediatemode=0 >>> -hardframedrop -ao alsa -vo x11 >>> >>> mplayer output: >>> MPlayer svn r34540 (Debian), built with gcc-4.7 (C) 2000-2012 MPlayer >>> Team >>> mplayer: could not connect to socket >>> mplayer: No such file or directory >>> Failed to open LIRC support. You will not be able to use your remote >>> control. >>> >>> Playing tv://. >>> TV file format detected. >>> Selected driver: v4l2 >>> name: Video 4 Linux 2 input >>> author: Martin Olschewski <olschewski@xxxxxxxxxxxxxxxx> >>> comment: first try, more to come ;-) >>> Selected device: Hauppauge WinTV HVR 900 >>> Tuner cap: >>> Tuner rxs: >>> Capabilities: video capture VBI capture device tuner audio >>> read/write streaming >>> supported norms: 0 = NTSC; 1 = NTSC-M; 2 = NTSC-M-JP; 3 = NTSC-M-KR; >>> 4 = NTSC-443; 5 = PAL; 6 = PAL-BG; 7 = PAL-H; 8 = PAL-I; 9 = PAL-DK; >>> 10 = PAL-M; 11 = PAL-N; 12 = PAL-Nc; 13 = PAL-60; 14 = SECAM; 15 = >>> SECAM-B; 16 = SECAM-G; 17 = SECAM-H; 18 = SECAM-DK; 19 = SECAM-L; 20 = >>> SECAM-Lc; >>> inputs: 0 = Television; 1 = Composite1; 2 = S-Video; >>> Current input: 0 >>> Current format: YUYV >>> v4l2: current audio mode is : STEREO >>> v4l2: ioctl set format failed: Invalid argument >>> v4l2: ioctl set format failed: Invalid argument >>> v4l2: ioctl set format failed: Invalid argument >>> >>> ========================================================================== >>> Opening video decoder: [raw] RAW Uncompressed Video >>> Could not find matching colorspace - retrying with -vf scale... >>> Opening video filter: [scale] >>> Movie-Aspect is undefined - no prescaling applied. >>> [swscaler @ 0x13c7d40] BICUBIC scaler, from yuyv422 to bgra using MMX2 >>> VO: [x11] 720x576 => 720x576 BGRA >>> Selected video codec: [rawyuy2] vfm: raw (RAW YUY2) >>> >>> ========================================================================== >>> >>> ========================================================================== >>> Opening audio decoder: [pcm] Uncompressed PCM audio decoder >>> AUDIO: 48000 Hz, 2 ch, s16le, 1536.0 kbit/100.00% (ratio: 192000->192000) >>> Selected audio codec: [pcm] afm: pcm (Uncompressed PCM) >>> >>> ========================================================================== >>> AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample) >>> Starting playback... >>> A: 3.1 V: 1.6 A-V: 1.447 ct: 0.165 92/ 92 0% 8% 28.8% 50 0 >>> >>> >>> ************************************************ >>> **** Your system is too SLOW to play this! **** >>> ************************************************ >>> >>> Possible reasons, problems, workarounds: >>> - Most common: broken/buggy _audio_ driver >>> - Try -ao sdl or use the OSS emulation of ALSA. >>> - Experiment with different values for -autosync, 30 is a good start. >>> - Slow video output >>> - Try a different -vo driver (-vo help for a list) or try -framedrop! >>> - Slow CPU >>> - Don't try to play a big DVD/DivX on a slow CPU! Try some of the >>> lavdopts, >>> e.g. -vfm ffmpeg -lavdopts lowres=1:fast:skiploopfilter=all. >>> - Broken file >>> - Try various combinations of -nobps -ni -forceidx -mc 0. >>> - Slow media (NFS/SMB mounts, DVD, VCD etc) >>> - Try -cache 8192. >>> - Are you using -cache to play a non-interleaved AVI file? >>> - Try -nocache. >>> Read DOCS/HTML/en/video.html for tuning/speedup tips. >>> If none of this helps you, read DOCS/HTML/en/bugreports.html. >>> >>> A: 11.7 V: 5.1 A-V: 6.636 ct: 0.250 308/308 0% 2% 12.9% 266 0 >>> v4l2: 310 frames successfully processed, 0 frames dropped. >>> >>> >>> kernel output: >>> [ 427.441405] usb 3-13.5.5: new high-speed USB device number 9 using >>> xhci_hcd >>> [ 427.534116] usb 3-13.5.5: New USB device found, idVendor=2040, >>> idProduct=6500 >>> [ 427.534126] usb 3-13.5.5: New USB device strings: Mfr=0, Product=1, >>> SerialNumber=2 >>> [ 427.534131] usb 3-13.5.5: Product: WinTV HVR-900 >>> [ 427.534136] usb 3-13.5.5: SerialNumber: 4026875858 >>> [ 427.586621] media: Linux media interface: v0.10 >>> [ 427.625926] Linux video capture interface: v2.00 >>> [ 427.669943] em28xx: New device WinTV HVR-900 @ 480 Mbps >>> (2040:6500, interface 0, class 0) >>> [ 427.669945] em28xx: Video interface 0 found: isoc >>> [ 427.669946] em28xx: DVB interface 0 found: isoc >>> [ 427.669973] em28xx: chip ID is em2882/3 >>> [ 427.838493] em2882/3 #0: EEPROM ID = 1a eb 67 95, EEPROM hash = >>> 0x43a734dd >>> [ 427.838499] em2882/3 #0: EEPROM info: >>> [ 427.838503] em2882/3 #0: AC97 audio (5 sample rates) >>> [ 427.838506] em2882/3 #0: 500mA max power >>> [ 427.838510] em2882/3 #0: Table at offset 0x24, strings=0x1e82, >>> 0x186a, 0x0000 >>> [ 427.838515] em2882/3 #0: Identified as Hauppauge WinTV HVR 900 >>> (card=10) >>> [ 427.840708] tveeprom 7-0050: Hauppauge model 65008, rev A1C0, serial# >>> 344018 >>> [ 427.840714] tveeprom 7-0050: tuner model is Xceive XC3028 (idx 120, >>> type 71) >>> [ 427.840719] tveeprom 7-0050: TV standards PAL(B/G) PAL(I) >>> PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xd4) >>> [ 427.840722] tveeprom 7-0050: audio processor is None (idx 0) >>> [ 427.840725] tveeprom 7-0050: has radio >>> [ 427.840727] em2882/3 #0: analog set to isoc mode. >>> [ 427.840729] em2882/3 #0: dvb set to isoc mode. >>> [ 427.840760] em28xx audio device (2040:6500): interface 1, class 1 >>> [ 427.840775] em28xx audio device (2040:6500): interface 2, class 1 >>> [ 427.840832] usbcore: registered new interface driver em28xx >>> [ 427.872945] em2882/3 #0: Registering V4L2 extension >>> [ 427.910653] tvp5150 7-005c: chip found @ 0xb8 (em2882/3 #0) >>> [ 427.910655] tvp5150 7-005c: tvp5150am1 detected. >>> [ 427.912474] tvp5150 7-005c: i2c i/o error: rc == -6 >>> [ 427.931506] tuner 7-0061: Tuner -1 found with type(s) Radio TV. >>> [ 427.970505] xc2028 7-0061: creating new instance >>> [ 427.970507] xc2028 7-0061: type set to XCeive xc2028/xc3028 tuner >>> [ 427.970545] em2882/3 #0: Config register raw data: 0x50 >>> [ 427.970773] em2882/3 #0: AC97 vendor ID = 0xffffffff >>> [ 427.970893] em2882/3 #0: AC97 features = 0x6a90 >>> [ 427.970894] em2882/3 #0: Empia 202 AC97 audio processor detected >>> [ 428.007655] usbcore: registered new interface driver snd-usb-audio >>> [ 428.030650] tvp5150 7-005c: i2c i/o error: rc == -6 >>> [ 428.033304] tvp5150 7-005c: i2c i/o error: rc == -6 >>> [ 428.036606] tvp5150 7-005c: i2c i/o error: rc == -6 >>> [ 428.037127] xc2028 7-0061: Loading 80 firmware images from >>> xc3028-v27.fw, type: xc2028 firmware, ver 2.7 >>> [ 428.082802] tvp5150 7-005c: i2c i/o error: rc == -6 >>> [ 428.132097] xc2028 7-0061: Loading firmware for type=BASE F8MHZ MTS >>> (7), id 0000000000000000. >>> [ 429.044910] MTS (4), id 00000000000000ff: >>> [ 429.044919] xc2028 7-0061: Loading firmware for type=MTS (4), id >>> 0000000100000007. >>> [ 429.372336] em2882/3 #0: V4L2 video device registered as video0 >>> [ 429.372343] em2882/3 #0: V4L2 VBI device registered as vbi0 >>> [ 429.372840] em2882/3 #0: V4L2 extension successfully initialized >>> [ 429.372845] em28xx: Registered (Em28xx v4l2 Extension) extension >>> [ 429.421235] em2882/3 #0: Binding DVB extension >>> [ 429.432300] tvp5150 7-005c: i2c i/o error: rc == -6 >>> [ 429.433737] tvp5150 7-005c: i2c i/o error: rc == -6 >>> [ 429.434274] tvp5150 7-005c: i2c i/o error: rc == -6 >>> [ 429.555251] xc2028 7-0061: attaching existing instance >>> [ 429.555259] xc2028 7-0061: type set to XCeive xc2028/xc3028 tuner >>> [ 429.555265] em2882/3 #0: em2882/3 #0/2: xc3028 attached >>> [ 429.555268] DVB: registering new adapter (em2882/3 #0) >>> [ 429.555277] usb 3-13.5.5: DVB: registering adapter 0 frontend 0 >>> (Zarlink ZL10353 DVB-T)... >>> [ 429.556086] em2882/3 #0: DVB extension successfully initialized >>> [ 429.556096] em28xx: Registered (Em28xx dvb Extension) extension >>> [ 429.574991] em2882/3 #0: Registering input extension >>> [ 429.610030] Registered IR keymap rc-hauppauge >>> [ 429.610306] input: em28xx IR (em2882/3 #0) as >>> /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13.5/3-13.5.5/rc/rc0/input22 >>> [ 429.611069] rc0: em28xx IR (em2882/3 #0) as >>> /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13.5/3-13.5.5/rc/rc0 >>> [ 429.611189] em2882/3 #0: Input extension successfully initalized >>> [ 429.611193] em28xx: Registered (Em28xx Input Extension) extension >>> [ 434.992078] tvp5150 7-005c: i2c i/o error: rc == -6 >>> [ 434.993487] tvp5150 7-005c: i2c i/o error: rc == -6 >>> [ 434.995820] tvp5150 7-005c: i2c i/o error: rc == -6 >>> [ 434.996902] tvp5150 7-005c: i2c i/o error: rc == -6 >>> [ 434.998295] tvp5150 7-005c: i2c i/o error: rc == -6 >>> [ 435.110378] xc2028 7-0061: Loading firmware for type=BASE F8MHZ MTS >>> (7), id 0000000000000000. >>> [ 436.055085] MTS (4), id 00000000000000ff: >>> [ 436.055097] xc2028 7-0061: Loading firmware for type=MTS (4), id >>> 0000000100000007. >>> [ 436.190777] tvp5150 7-005c: i2c i/o error: rc == -6 >>> [ 436.190784] tvp5150 7-005c: tvp5150_selmux: failed with error = -6 >>> [ 436.263263] xc2028 7-0061: Loading firmware for type=MTS (4), id >>> 0000000100000007. >>> [ 436.633107] tvp5150 7-005c: i2c i/o error: rc == -6 >>> >>> Kind regards, >>> >>> Michal >>> >> > -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
