On 06/11/14 06:51, Michal B wrote:
Hi,
analog TV on Hauppauge HVR 900 [2040:6500] - audio works correctly but
video stops after few samples, audio continues after video stop,
H Michal
Yep, pretty much the same for all 3.18 and rc3
One of my systems freezes the other no video.
All the drivers appear to be doing the same.
3.17.2 is fine.
It appears to be a video overlay problem, only start to panic if at rc6
Regards
Malcolm
tested:
mplayer tv:// -tv
norm=PAL-BG:freq=687.5:input=0:device=/dev/video0:alsa:amode=1:adevice=hw.2,0:audiorate=48000:forceaudio:immediatemode=0
-hardframedrop -ao alsa -vo x11
mplayer output:
MPlayer svn r34540 (Debian), built with gcc-4.7 (C) 2000-2012 MPlayer Team
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Playing tv://.
TV file format detected.
Selected driver: v4l2
name: Video 4 Linux 2 input
author: Martin Olschewski <olschewski@xxxxxxxxxxxxxxxx>
comment: first try, more to come ;-)
Selected device: Hauppauge WinTV HVR 900
Tuner cap:
Tuner rxs:
Capabilities: video capture VBI capture device tuner audio
read/write streaming
supported norms: 0 = NTSC; 1 = NTSC-M; 2 = NTSC-M-JP; 3 = NTSC-M-KR;
4 = NTSC-443; 5 = PAL; 6 = PAL-BG; 7 = PAL-H; 8 = PAL-I; 9 = PAL-DK;
10 = PAL-M; 11 = PAL-N; 12 = PAL-Nc; 13 = PAL-60; 14 = SECAM; 15 =
SECAM-B; 16 = SECAM-G; 17 = SECAM-H; 18 = SECAM-DK; 19 = SECAM-L; 20 =
SECAM-Lc;
inputs: 0 = Television; 1 = Composite1; 2 = S-Video;
Current input: 0
Current format: YUYV
v4l2: current audio mode is : STEREO
v4l2: ioctl set format failed: Invalid argument
v4l2: ioctl set format failed: Invalid argument
v4l2: ioctl set format failed: Invalid argument
==========================================================================
Opening video decoder: [raw] RAW Uncompressed Video
Could not find matching colorspace - retrying with -vf scale...
Opening video filter: [scale]
Movie-Aspect is undefined - no prescaling applied.
[swscaler @ 0x13c7d40] BICUBIC scaler, from yuyv422 to bgra using MMX2
VO: [x11] 720x576 => 720x576 BGRA
Selected video codec: [rawyuy2] vfm: raw (RAW YUY2)
==========================================================================
==========================================================================
Opening audio decoder: [pcm] Uncompressed PCM audio decoder
AUDIO: 48000 Hz, 2 ch, s16le, 1536.0 kbit/100.00% (ratio: 192000->192000)
Selected audio codec: [pcm] afm: pcm (Uncompressed PCM)
==========================================================================
AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample)
Starting playback...
A: 3.1 V: 1.6 A-V: 1.447 ct: 0.165 92/ 92 0% 8% 28.8% 50 0
************************************************
**** Your system is too SLOW to play this! ****
************************************************
Possible reasons, problems, workarounds:
- Most common: broken/buggy _audio_ driver
- Try -ao sdl or use the OSS emulation of ALSA.
- Experiment with different values for -autosync, 30 is a good start.
- Slow video output
- Try a different -vo driver (-vo help for a list) or try -framedrop!
- Slow CPU
- Don't try to play a big DVD/DivX on a slow CPU! Try some of the lavdopts,
e.g. -vfm ffmpeg -lavdopts lowres=1:fast:skiploopfilter=all.
- Broken file
- Try various combinations of -nobps -ni -forceidx -mc 0.
- Slow media (NFS/SMB mounts, DVD, VCD etc)
- Try -cache 8192.
- Are you using -cache to play a non-interleaved AVI file?
- Try -nocache.
Read DOCS/HTML/en/video.html for tuning/speedup tips.
If none of this helps you, read DOCS/HTML/en/bugreports.html.
A: 11.7 V: 5.1 A-V: 6.636 ct: 0.250 308/308 0% 2% 12.9% 266 0
v4l2: 310 frames successfully processed, 0 frames dropped.
kernel output:
[ 427.441405] usb 3-13.5.5: new high-speed USB device number 9 using xhci_hcd
[ 427.534116] usb 3-13.5.5: New USB device found, idVendor=2040, idProduct=6500
[ 427.534126] usb 3-13.5.5: New USB device strings: Mfr=0, Product=1,
SerialNumber=2
[ 427.534131] usb 3-13.5.5: Product: WinTV HVR-900
[ 427.534136] usb 3-13.5.5: SerialNumber: 4026875858
[ 427.586621] media: Linux media interface: v0.10
[ 427.625926] Linux video capture interface: v2.00
[ 427.669943] em28xx: New device WinTV HVR-900 @ 480 Mbps
(2040:6500, interface 0, class 0)
[ 427.669945] em28xx: Video interface 0 found: isoc
[ 427.669946] em28xx: DVB interface 0 found: isoc
[ 427.669973] em28xx: chip ID is em2882/3
[ 427.838493] em2882/3 #0: EEPROM ID = 1a eb 67 95, EEPROM hash = 0x43a734dd
[ 427.838499] em2882/3 #0: EEPROM info:
[ 427.838503] em2882/3 #0: AC97 audio (5 sample rates)
[ 427.838506] em2882/3 #0: 500mA max power
[ 427.838510] em2882/3 #0: Table at offset 0x24, strings=0x1e82,
0x186a, 0x0000
[ 427.838515] em2882/3 #0: Identified as Hauppauge WinTV HVR 900 (card=10)
[ 427.840708] tveeprom 7-0050: Hauppauge model 65008, rev A1C0, serial# 344018
[ 427.840714] tveeprom 7-0050: tuner model is Xceive XC3028 (idx 120, type 71)
[ 427.840719] tveeprom 7-0050: TV standards PAL(B/G) PAL(I)
PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xd4)
[ 427.840722] tveeprom 7-0050: audio processor is None (idx 0)
[ 427.840725] tveeprom 7-0050: has radio
[ 427.840727] em2882/3 #0: analog set to isoc mode.
[ 427.840729] em2882/3 #0: dvb set to isoc mode.
[ 427.840760] em28xx audio device (2040:6500): interface 1, class 1
[ 427.840775] em28xx audio device (2040:6500): interface 2, class 1
[ 427.840832] usbcore: registered new interface driver em28xx
[ 427.872945] em2882/3 #0: Registering V4L2 extension
[ 427.910653] tvp5150 7-005c: chip found @ 0xb8 (em2882/3 #0)
[ 427.910655] tvp5150 7-005c: tvp5150am1 detected.
[ 427.912474] tvp5150 7-005c: i2c i/o error: rc == -6
[ 427.931506] tuner 7-0061: Tuner -1 found with type(s) Radio TV.
[ 427.970505] xc2028 7-0061: creating new instance
[ 427.970507] xc2028 7-0061: type set to XCeive xc2028/xc3028 tuner
[ 427.970545] em2882/3 #0: Config register raw data: 0x50
[ 427.970773] em2882/3 #0: AC97 vendor ID = 0xffffffff
[ 427.970893] em2882/3 #0: AC97 features = 0x6a90
[ 427.970894] em2882/3 #0: Empia 202 AC97 audio processor detected
[ 428.007655] usbcore: registered new interface driver snd-usb-audio
[ 428.030650] tvp5150 7-005c: i2c i/o error: rc == -6
[ 428.033304] tvp5150 7-005c: i2c i/o error: rc == -6
[ 428.036606] tvp5150 7-005c: i2c i/o error: rc == -6
[ 428.037127] xc2028 7-0061: Loading 80 firmware images from
xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[ 428.082802] tvp5150 7-005c: i2c i/o error: rc == -6
[ 428.132097] xc2028 7-0061: Loading firmware for type=BASE F8MHZ MTS
(7), id 0000000000000000.
[ 429.044910] MTS (4), id 00000000000000ff:
[ 429.044919] xc2028 7-0061: Loading firmware for type=MTS (4), id
0000000100000007.
[ 429.372336] em2882/3 #0: V4L2 video device registered as video0
[ 429.372343] em2882/3 #0: V4L2 VBI device registered as vbi0
[ 429.372840] em2882/3 #0: V4L2 extension successfully initialized
[ 429.372845] em28xx: Registered (Em28xx v4l2 Extension) extension
[ 429.421235] em2882/3 #0: Binding DVB extension
[ 429.432300] tvp5150 7-005c: i2c i/o error: rc == -6
[ 429.433737] tvp5150 7-005c: i2c i/o error: rc == -6
[ 429.434274] tvp5150 7-005c: i2c i/o error: rc == -6
[ 429.555251] xc2028 7-0061: attaching existing instance
[ 429.555259] xc2028 7-0061: type set to XCeive xc2028/xc3028 tuner
[ 429.555265] em2882/3 #0: em2882/3 #0/2: xc3028 attached
[ 429.555268] DVB: registering new adapter (em2882/3 #0)
[ 429.555277] usb 3-13.5.5: DVB: registering adapter 0 frontend 0
(Zarlink ZL10353 DVB-T)...
[ 429.556086] em2882/3 #0: DVB extension successfully initialized
[ 429.556096] em28xx: Registered (Em28xx dvb Extension) extension
[ 429.574991] em2882/3 #0: Registering input extension
[ 429.610030] Registered IR keymap rc-hauppauge
[ 429.610306] input: em28xx IR (em2882/3 #0) as
/devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13.5/3-13.5.5/rc/rc0/input22
[ 429.611069] rc0: em28xx IR (em2882/3 #0) as
/devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13.5/3-13.5.5/rc/rc0
[ 429.611189] em2882/3 #0: Input extension successfully initalized
[ 429.611193] em28xx: Registered (Em28xx Input Extension) extension
[ 434.992078] tvp5150 7-005c: i2c i/o error: rc == -6
[ 434.993487] tvp5150 7-005c: i2c i/o error: rc == -6
[ 434.995820] tvp5150 7-005c: i2c i/o error: rc == -6
[ 434.996902] tvp5150 7-005c: i2c i/o error: rc == -6
[ 434.998295] tvp5150 7-005c: i2c i/o error: rc == -6
[ 435.110378] xc2028 7-0061: Loading firmware for type=BASE F8MHZ MTS
(7), id 0000000000000000.
[ 436.055085] MTS (4), id 00000000000000ff:
[ 436.055097] xc2028 7-0061: Loading firmware for type=MTS (4), id
0000000100000007.
[ 436.190777] tvp5150 7-005c: i2c i/o error: rc == -6
[ 436.190784] tvp5150 7-005c: tvp5150_selmux: failed with error = -6
[ 436.263263] xc2028 7-0061: Loading firmware for type=MTS (4), id
0000000100000007.
[ 436.633107] tvp5150 7-005c: i2c i/o error: rc == -6
Kind regards,
Michal
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
