Re: [PATCH 5/6] si4713 : Added the USB driver for Si4713

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Dinesh,

On Fri, Aug 30, 2013 at 7:28 AM, Dinesh Ram <dinram@xxxxxxxxx> wrote:
> This is the USB driver for the Silicon Labs development board.
> It contains the Si4713 FM transmitter chip.
>

Can you please fix the list of errors and warnings checkpatch.pl
outputs on your patch?
total: 73 errors, 63 warnings, 8 checks, 562 lines checked

NOTE: whitespace errors detected, you may wish to use scripts/cleanpatch or
      scripts/cleanfile

/tmp/a/0005-si4713-Added-the-USB-driver-for-Si4713.patch has style
problems, please review.

If any of these errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.

Also, I gave a shot on your driver on 3.11-rc7. As I was expecting,
there is still some work to be done on the regulator side. The subdev
claims there is no supplies for none of its pins. Here is what I get:
[  328.642100] usbcore: registered new interface driver radio-usb-si4713
[  358.914266] usb 2-1.2: new full-speed USB device number 4 using ehci-pci
[  359.008797] usb 2-1.2: New USB device found, idVendor=10c4, idProduct=8244
[  359.008803] usb 2-1.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[  359.008806] usb 2-1.2: Product: Si47xx Baseboard
[  359.008809] usb 2-1.2: Manufacturer: SILICON LABORATORIES INC.
[  359.008812] usb 2-1.2: SerialNumber: CBDA8-00-0
[  359.009162] radio-usb-si4713 2-1.2:1.0: Si4713 development board
discovered: (10C4:8244)
[  359.617982] si4713 12-0063: Failed to get supply 'vio': -517
[  359.617991] si4713 12-0063: Cannot get regulators: -517
[  359.618000] i2c 12-0063: Driver si4713 requests probe deferral
[  359.618043] radio-usb-si4713 2-1.2:1.0: cannot get v4l2 subdevice
[  359.910881] hidraw: raw HID events driver (C) Jiri Kosina
[  359.919387] usbhid 2-1.2:1.0: couldn't find an input interrupt endpoint
[  359.919436] usbcore: registered new interface driver usbhid
[  359.919440] usbhid: USB HID core driver


> Signed-off-by: Dinesh Ram <dinram@xxxxxxxxx>
> ---
>  drivers/media/radio/si4713/Kconfig            |  15 +
>  drivers/media/radio/si4713/Makefile           |   1 +
>  drivers/media/radio/si4713/radio-usb-si4713.c | 538 ++++++++++++++++++++++++++
>  3 files changed, 554 insertions(+)
>  create mode 100644 drivers/media/radio/si4713/radio-usb-si4713.c
>
> diff --git a/drivers/media/radio/si4713/Kconfig b/drivers/media/radio/si4713/Kconfig
> index f8ac328..6229078 100644
> --- a/drivers/media/radio/si4713/Kconfig
> +++ b/drivers/media/radio/si4713/Kconfig
> @@ -1,3 +1,18 @@
> +config USB_SI4713
> +       tristate "Silicon Labs Si4713 FM Radio Transmitter support with USB"
> +       depends on USB && RADIO_SI4713
> +       select SI4713
> +       ---help---
> +         This is a driver for USB devices with the Silicon Labs SI4713
> +         chip. Currently these devices are known to work.
> +         - 10c4:8244: Silicon Labs FM Transmitter USB device.
> +
> +         Say Y here if you want to connect this type of radio to your
> +         computer's USB port.
> +
> +         To compile this driver as a module, choose M here: the
> +         module will be called radio-usb-si4713.
> +
>  config PLATFORM_SI4713
>         tristate "Silicon Labs Si4713 FM Radio Transmitter support with I2C"
>         depends on I2C && RADIO_SI4713
> diff --git a/drivers/media/radio/si4713/Makefile b/drivers/media/radio/si4713/Makefile
> index 9d0bd0e..6524674 100644
> --- a/drivers/media/radio/si4713/Makefile
> +++ b/drivers/media/radio/si4713/Makefile
> @@ -3,5 +3,6 @@
>  #
>
>  obj-$(CONFIG_I2C_SI4713) += si4713.o
> +obj-$(CONFIG_USB_SI4713) += radio-usb-si4713.o
>  obj-$(CONFIG_PLATFORM_SI4713) += radio-platform-si4713.o
>
> diff --git a/drivers/media/radio/si4713/radio-usb-si4713.c b/drivers/media/radio/si4713/radio-usb-si4713.c
> new file mode 100644
> index 0000000..7f7b322
> --- /dev/null
> +++ b/drivers/media/radio/si4713/radio-usb-si4713.c
> @@ -0,0 +1,538 @@
> +/*
> + * Copyright 2013 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
> + *
> + * This program is free software; you may redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; version 2 of the License.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
> + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
> + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
> + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
> + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
> + * SOFTWARE.
> + */
> +
> +/* kernel includes */
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/usb.h>
> +#include <linux/init.h>
> +#include <linux/slab.h>
> +#include <linux/input.h>
> +#include <linux/mutex.h>
> +#include <linux/i2c.h>
> +/* V4l includes */
> +#include <linux/videodev2.h>
> +#include <media/v4l2-common.h>
> +#include <media/v4l2-device.h>
> +#include <media/v4l2-ioctl.h>
> +#include <media/v4l2-event.h>
> +#include <media/si4713.h>
> +
> +#include "si4713.h"
> +
> +/* driver and module definitions */
> +MODULE_AUTHOR("Dinesh Ram <dinesh.ram@xxxxxxx>");
> +MODULE_DESCRIPTION("Si4713 FM Transmitter USB driver");
> +MODULE_LICENSE("GPL v2");
> +
> +/* The Device announces itself as Cygnal Integrated Products, Inc. */
> +#define USB_SI4713_VENDOR              0x10c4
> +#define USB_SI4713_PRODUCT             0x8244
> +
> +#define BUFFER_LENGTH                  64
> +#define USB_TIMEOUT                    1000
> +#define USB_RESP_TIMEOUT               50000
> +
> +/* USB Device ID List */
> +static struct usb_device_id usb_si4713_usb_device_table[] = {
> +       {USB_DEVICE_AND_INTERFACE_INFO(USB_SI4713_VENDOR, USB_SI4713_PRODUCT,
> +                                                       USB_CLASS_HID, 0, 0) },
> +       { }                                             /* Terminating entry */
> +};
> +
> +MODULE_DEVICE_TABLE(usb, usb_si4713_usb_device_table);
> +
> +struct si4713_usb_device {
> +       struct usb_device       *usbdev;
> +       struct usb_interface    *intf;
> +       struct video_device     vdev;
> +       struct v4l2_device      v4l2_dev;
> +       struct v4l2_subdev      *v4l2_subdev;
> +       struct mutex            lock;
> +       struct i2c_adapter      i2c_adapter;
> +
> +       u8                      *buffer;
> +};
> +
> +static inline struct si4713_usb_device *to_si4713_dev(struct v4l2_device *v4l2_dev)
> +{
> +       return container_of(v4l2_dev, struct si4713_usb_device, v4l2_dev);
> +}
> +
> +static int vidioc_querycap(struct file *file, void *priv,
> +                                       struct v4l2_capability *v)
> +{
> +       struct si4713_usb_device *radio = video_drvdata(file);
> +
> +       strlcpy(v->driver, "radio-usb-si4713", sizeof(v->driver));
> +       strlcpy(v->card, "Si4713 FM Transmitter", sizeof(v->card));
> +       usb_make_path(radio->usbdev, v->bus_info, sizeof(v->bus_info));
> +       v->device_caps = V4L2_CAP_MODULATOR | V4L2_CAP_RDS_OUTPUT;
> +       v->capabilities = v->device_caps | V4L2_CAP_DEVICE_CAPS;
> +
> +       return 0;
> +}
> +
> +static int vidioc_g_modulator(struct file *file, void *priv,
> +                               struct v4l2_modulator *vm)
> +{
> +       struct si4713_usb_device *radio = video_drvdata(file);
> +
> +       return v4l2_subdev_call(radio->v4l2_subdev, tuner, g_modulator, vm);
> +}
> +
> +static int vidioc_s_modulator(struct file *file, void *priv,
> +                               const struct v4l2_modulator *vm)
> +{
> +       struct si4713_usb_device *radio = video_drvdata(file);
> +
> +       return v4l2_subdev_call(radio->v4l2_subdev, tuner, s_modulator, vm);
> +}
> +
> +static int vidioc_s_frequency(struct file *file, void *priv,
> +                               const struct v4l2_frequency *vf)
> +{
> +       struct si4713_usb_device *radio = video_drvdata(file);
> +
> +       return v4l2_subdev_call(radio->v4l2_subdev, tuner, s_frequency, vf);
> +}
> +
> +static int vidioc_g_frequency(struct file *file, void *priv,
> +                               struct v4l2_frequency *vf)
> +{
> +       struct si4713_usb_device *radio = video_drvdata(file);
> +
> +       return v4l2_subdev_call(radio->v4l2_subdev, tuner, g_frequency, vf);
> +}
> +
> +static const struct v4l2_ioctl_ops usb_si4713_ioctl_ops = {
> +       .vidioc_querycap          = vidioc_querycap,
> +       .vidioc_g_modulator       = vidioc_g_modulator,
> +       .vidioc_s_modulator       = vidioc_s_modulator,
> +       .vidioc_g_frequency       = vidioc_g_frequency,
> +       .vidioc_s_frequency       = vidioc_s_frequency,
> +       .vidioc_log_status        = v4l2_ctrl_log_status,
> +        .vidioc_subscribe_event   = v4l2_ctrl_subscribe_event,
> +        .vidioc_unsubscribe_event = v4l2_event_unsubscribe,
> +};
> +
> +/* File system interface */
> +static const struct v4l2_file_operations usb_si4713_fops = {
> +       .owner          = THIS_MODULE,
> +       .open           = v4l2_fh_open,
> +       .release        = v4l2_fh_release,
> +       .poll           = v4l2_ctrl_poll,
> +       .unlocked_ioctl = video_ioctl2,
> +};
> +
> +static void usb_si4713_video_device_release(struct v4l2_device *v4l2_dev)
> +{
> +       struct si4713_usb_device *radio = to_si4713_dev(v4l2_dev);
> +       struct i2c_adapter *adapter = &radio->i2c_adapter;
> +
> +       i2c_del_adapter(adapter);
> +       v4l2_device_unregister(&radio->v4l2_dev);
> +       kfree(radio->buffer);
> +       kfree(radio);
> +}
> +
> +/*
> + * This command sequence emulates the behaviour of the Windows driver.
> + * The structure of these commands was determined by sniffing the
> + * usb traffic of the device during startup.
> + * Most likely, these commands make some queries to the device.
> + * Commands are sent to enquire parameters like the bus mode,
> + * component revision, boot mode, the device serial number etc.
> + *
> + * These commands are necessary to be sent in this order during startup.
> + * The device fails to powerup if these commands are not sent.
> + *
> + * The complete list of startup commands is given in the start_seq table below.
> + */
> +static int si4713_send_startup_command(struct si4713_usb_device *radio)
> +{
> +       unsigned long until_jiffies = jiffies + usecs_to_jiffies(USB_RESP_TIMEOUT) + 1;
> +       u8 *buffer = radio->buffer;
> +       int retval;
> +
> +       /* send the command */
> +       retval = usb_control_msg(radio->usbdev, usb_sndctrlpipe(radio->usbdev, 0),
> +                                       0x09, 0x21, 0x033f, 0, radio->buffer,
> +                                       BUFFER_LENGTH, USB_TIMEOUT);
> +       if (retval < 0)
> +               return retval;
> +
> +       for (;;) {
> +               /* receive the response */
> +               retval = usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
> +                               0x01, 0xa1, 0x033f, 0, radio->buffer,
> +                               BUFFER_LENGTH, USB_TIMEOUT);
> +               if (retval < 0)
> +                       return retval;
> +               if (!radio->buffer[1]) {
> +                       /* USB traffic sniffing showed that some commands require
> +                        * additional checks. */
> +                       switch (buffer[1]) {
> +                       case 0x32:
> +                               if (radio->buffer[2] == 0)
> +                                       return 0;
> +                               break;
> +                       case 0x14:
> +                       case 0x12:
> +                               if (radio->buffer[2] & SI4713_CTS)
> +                                       return 0;
> +                               break;
> +                       case 0x06:
> +                               if ((radio->buffer[2] & SI4713_CTS) && radio->buffer[9] == 0x08)
> +                                       return 0;
> +                               break;
> +                       default:
> +                               return 0;
> +                       }
> +               }
> +               if (jiffies > until_jiffies)
> +                       return -EIO;
> +               msleep(3);
> +       }
> +
> +       return retval;
> +}
> +
> +struct si4713_start_seq_table {
> +       int len;
> +       u8 payload[8];
> +};
> +
> +/*
> + * Some of the startup commands that could be recognized are :
> + * (0x03): Get serial number of the board (Response : CB000-00-00)
> + * (0x06, 0x03, 0x03, 0x08, 0x01, 0x0f) : Get Component revision
> + */
> +struct si4713_start_seq_table start_seq[] = {
> +
> +       { 1, { 0x03 } },
> +       { 2, { 0x32, 0x7f } },
> +       { 6, { 0x06, 0x03, 0x03, 0x08, 0x01, 0x0f } },
> +       { 2, { 0x14, 0x02 } },
> +       { 2, { 0x09, 0x90 } },
> +       { 3, { 0x08, 0x90, 0xfa } },
> +       { 2, { 0x36, 0x01 } },
> +       { 2, { 0x05, 0x03 } },
> +       { 7, { 0x06, 0x00, 0x06, 0x0e, 0x01, 0x0f, 0x05 } },
> +       { 1, { 0x12 } },
> +       /* Commands that are sent after pressing the 'Initialize'
> +               button in the windows application */
> +       { 1, { 0x03 } },
> +       { 1, { 0x01 } },
> +       { 2, { 0x09, 0x90 } },
> +       { 3, { 0x08, 0x90, 0xfa } },
> +       { 1, { 0x34 } },
> +       { 2, { 0x35, 0x01 } },
> +       { 2, { 0x36, 0x01 } },
> +       { 2, { 0x30, 0x09 } },
> +       { 4, { 0x30, 0x06, 0x00, 0xe2 } },
> +       { 3, { 0x31, 0x01, 0x30 } },
> +       { 3, { 0x31, 0x04, 0x09 } },
> +       { 2, { 0x05, 0x02 } },
> +       { 6, { 0x06, 0x03, 0x03, 0x08, 0x01, 0x0f } },
> +};
> +
> +static int si4713_start_seq(struct si4713_usb_device *radio)
> +{
> +       int retval = 0;
> +       int i;
> +
> +       radio->buffer[0] = 0x3f;
> +
> +       for (i = 0; i < ARRAY_SIZE(start_seq); i++) {
> +               int len = start_seq[i].len;
> +               u8 *payload = start_seq[i].payload;
> +
> +               memcpy(radio->buffer + 1, payload, len);
> +               memset(radio->buffer + len + 1, 0, BUFFER_LENGTH - 1 - len);
> +               retval = si4713_send_startup_command(radio);
> +       }
> +
> +       return retval;
> +}
> +
> +static struct i2c_board_info si4713_board_info = {
> +       I2C_BOARD_INFO("si4713", SI4713_I2C_ADDR_BUSEN_HIGH),
> +};
> +
> +struct si4713_command_table {
> +       int command_id;
> +       u8 payload[8];
> +};
> +
> +/*
> + * Structure of a command :
> + *     Byte 1 : 0x3f (always)
> + *     Byte 2 : 0x06 (send a command)
> + *     Byte 3 : Unknown
> + *     Byte 4 : Number of arguments + 1 (for the command byte)
> + *     Byte 5 : Number of response bytes
> + */
> +struct si4713_command_table command_table[] = {
> +
> +       { SI4713_CMD_POWER_UP,          { 0x00, SI4713_PWUP_NARGS + 1, SI4713_PWUP_NRESP} },
> +       { SI4713_CMD_GET_REV,           { 0x03, 0x01, SI4713_GETREV_NRESP } },
> +       { SI4713_CMD_POWER_DOWN,        { 0x00, 0x01, SI4713_PWDN_NRESP} },
> +       { SI4713_CMD_SET_PROPERTY,      { 0x00, SI4713_SET_PROP_NARGS + 1, SI4713_SET_PROP_NRESP } },
> +       { SI4713_CMD_GET_PROPERTY,      { 0x00, SI4713_GET_PROP_NARGS + 1, SI4713_GET_PROP_NRESP } },
> +       { SI4713_CMD_TX_TUNE_FREQ,      { 0x03, SI4713_TXFREQ_NARGS + 1, SI4713_TXFREQ_NRESP } },
> +       { SI4713_CMD_TX_TUNE_POWER,     { 0x03, SI4713_TXPWR_NARGS + 1, SI4713_TXPWR_NRESP } },
> +       { SI4713_CMD_TX_TUNE_MEASURE,   { 0x03, SI4713_TXMEA_NARGS + 1, SI4713_TXMEA_NRESP } },
> +       { SI4713_CMD_TX_TUNE_STATUS,    { 0x00, SI4713_TXSTATUS_NARGS + 1, SI4713_TXSTATUS_NRESP } },
> +       { SI4713_CMD_TX_ASQ_STATUS,     { 0x03, SI4713_ASQSTATUS_NARGS + 1, SI4713_ASQSTATUS_NRESP } },
> +       { SI4713_CMD_GET_INT_STATUS,    { 0x03, 0x01, SI4713_GET_STATUS_NRESP } },
> +       { SI4713_CMD_TX_RDS_BUFF,       { 0x03, SI4713_RDSBUFF_NARGS + 1, SI4713_RDSBUFF_NRESP } },
> +       { SI4713_CMD_TX_RDS_PS,         { 0x00, SI4713_RDSPS_NARGS + 1, SI4713_RDSPS_NRESP } },
> +};
> +
> +static int send_command(struct si4713_usb_device *radio, u8 *payload, char *data, int len)
> +{
> +       int retval;
> +
> +       radio->buffer[0] = 0x3f;
> +       radio->buffer[1] = 0x06;
> +
> +       memcpy(radio->buffer + 2, payload, 3);
> +       memcpy(radio->buffer + 5, data, len);
> +       memset(radio->buffer + 5 + len, 0, BUFFER_LENGTH - 5 - len);
> +
> +       /* send the command */
> +       retval = usb_control_msg(radio->usbdev, usb_sndctrlpipe(radio->usbdev, 0),
> +                                       0x09, 0x21, 0x033f, 0, radio->buffer,
> +                                       BUFFER_LENGTH, USB_TIMEOUT);
> +
> +       return retval < 0 ? retval : 0;
> +}
> +
> +static int si4713_i2c_read(struct si4713_usb_device *radio, char *data, int len)
> +{
> +       unsigned long until_jiffies = jiffies + usecs_to_jiffies(USB_RESP_TIMEOUT) + 1;
> +       int retval;
> +
> +       /* receive the response */
> +       for (;;) {
> +               retval = usb_control_msg(radio->usbdev,
> +                                       usb_rcvctrlpipe(radio->usbdev, 0),
> +                                       0x01, 0xa1, 0x033f, 0, radio->buffer,
> +                                       BUFFER_LENGTH, USB_TIMEOUT);
> +               if (retval < 0)
> +                       return retval;
> +
> +               /*
> +                * Check that we get a valid reply back (buffer[1] == 0) and
> +                * that CTS is set before returning, otherwise we wait and try
> +                * again. The i2c driver also does the CTS check, but the timeouts
> +                * used there are much too small for this USB driver, so we wait
> +                * for it here.
> +                */
> +               if (radio->buffer[1] == 0 && (radio->buffer[2] & SI4713_CTS)) {
> +                       memcpy(data, radio->buffer + 2, len);
> +                       return 0;
> +               }
> +               if (jiffies > until_jiffies) {
> +                       /* Zero the status value, ensuring CTS isn't set */
> +                       data[0] = 0;
> +                       return 0;
> +               }
> +               msleep(3);
> +       }
> +}
> +
> +static int si4713_i2c_write(struct si4713_usb_device *radio, char *data, int len)
> +{
> +       int retval;
> +       int i;
> +
> +       if (len > BUFFER_LENGTH - 5)
> +               return -EINVAL;
> +
> +       for (i = 0; i < ARRAY_SIZE(command_table); i++) {
> +               if (data[0] == command_table[i].command_id)
> +                       retval = send_command(radio, command_table[i].payload, data, len);
> +       }
> +
> +       return retval < 0 ? retval : 0;
> +}
> +
> +static int si4713_transfer(struct i2c_adapter *i2c_adapter, struct i2c_msg *msgs, int num)
> +{
> +       struct si4713_usb_device *radio = i2c_get_adapdata(i2c_adapter);
> +       int retval = -EINVAL;
> +       int i;
> +
> +       if (num <= 0)
> +               return 0;
> +
> +       for (i = 0; i < num; i++) {
> +               if (msgs[i].flags & I2C_M_RD)
> +                       retval = si4713_i2c_read(radio, msgs[i].buf, msgs[i].len);
> +               else
> +                       retval = si4713_i2c_write(radio, msgs[i].buf, msgs[i].len);
> +               if (retval)
> +                       break;
> +       }
> +
> +       return retval ? retval : num;
> +}
> +
> +static u32 si4713_functionality(struct i2c_adapter *adapter)
> +{
> +       return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
> +}
> +
> +static struct i2c_algorithm si4713_algo = {
> +       .master_xfer   = si4713_transfer,
> +       .functionality = si4713_functionality,
> +};
> +
> +/* This name value shows up in the sysfs filename associated
> +               with this I2C adapter */
> +static struct i2c_adapter si4713_i2c_adapter_template = {
> +       .name   = "si4713-i2c",
> +       .owner  = THIS_MODULE,
> +       .algo   = &si4713_algo,
> +};
> +
> +int si4713_register_i2c_adapter(struct si4713_usb_device *radio)
> +{
> +       radio->i2c_adapter = si4713_i2c_adapter_template;
> +       /* set up sysfs linkage to our parent device */
> +       radio->i2c_adapter.dev.parent = &radio->usbdev->dev;
> +       i2c_set_adapdata(&radio->i2c_adapter, radio);
> +
> +       return i2c_add_adapter(&radio->i2c_adapter);
> +}
> +
> +/* check if the device is present and register with v4l and usb if it is */
> +static int usb_si4713_probe(struct usb_interface *intf,
> +                               const struct usb_device_id *id)
> +{
> +       struct si4713_usb_device *radio;
> +       struct i2c_adapter *adapter;
> +       struct v4l2_subdev *sd;
> +       int retval = -ENOMEM;
> +
> +       dev_info(&intf->dev, "Si4713 development board discovered: (%04X:%04X)\n",
> +                       id->idVendor, id->idProduct);
> +
> +       /* Initialize local device structure */
> +       radio = kzalloc(sizeof(struct si4713_usb_device), GFP_KERNEL);
> +       if (radio)
> +               radio->buffer = kmalloc(BUFFER_LENGTH, GFP_KERNEL);
> +
> +       if (!radio || !radio->buffer) {
> +               dev_err(&intf->dev, "kmalloc for si4713_usb_device failed\n");
> +               kfree(radio);
> +               return -ENOMEM;
> +       }
> +
> +       mutex_init(&radio->lock);
> +
> +       radio->usbdev = interface_to_usbdev(intf);
> +       radio->intf = intf;
> +       usb_set_intfdata(intf, &radio->v4l2_dev);
> +
> +       retval = si4713_start_seq(radio);
> +       if (retval < 0)
> +               goto err_v4l2;
> +
> +       retval = v4l2_device_register(&intf->dev, &radio->v4l2_dev);
> +       if (retval < 0) {
> +               dev_err(&intf->dev, "couldn't register v4l2_device\n");
> +               goto err_v4l2;
> +       }
> +
> +       retval = si4713_register_i2c_adapter(radio);
> +       if (retval < 0) {
> +               dev_err(&intf->dev, "could not register i2c device\n");
> +               goto err_i2cdev;
> +       }
> +
> +       adapter = &radio->i2c_adapter;
> +       sd = v4l2_i2c_new_subdev_board(&radio->v4l2_dev, adapter,
> +                                         &si4713_board_info, NULL);
> +       radio->v4l2_subdev = sd;
> +       if (!sd) {
> +               dev_err(&intf->dev, "cannot get v4l2 subdevice\n");
> +               retval = -ENODEV;
> +               goto del_adapter;
> +       }
> +
> +       radio->vdev.ctrl_handler = sd->ctrl_handler;
> +       radio->v4l2_dev.release = usb_si4713_video_device_release;
> +       strlcpy(radio->vdev.name, radio->v4l2_dev.name,
> +               sizeof(radio->vdev.name));
> +       radio->vdev.v4l2_dev = &radio->v4l2_dev;
> +       radio->vdev.fops = &usb_si4713_fops;
> +       radio->vdev.ioctl_ops = &usb_si4713_ioctl_ops;
> +       radio->vdev.lock = &radio->lock;
> +       radio->vdev.release = video_device_release_empty;
> +       radio->vdev.vfl_dir = VFL_DIR_TX;
> +
> +       video_set_drvdata(&radio->vdev, radio);
> +       set_bit(V4L2_FL_USE_FH_PRIO, &radio->vdev.flags);
> +
> +       retval = video_register_device(&radio->vdev, VFL_TYPE_RADIO, -1);
> +       if (retval < 0) {
> +               dev_err(&intf->dev, "could not register video device\n");
> +               goto del_adapter;
> +       }
> +
> +       dev_info(&intf->dev, "V4L2 device registered as %s\n",
> +                       video_device_node_name(&radio->vdev));
> +
> +       return 0;
> +
> +del_adapter:
> +       i2c_del_adapter(adapter);
> +err_i2cdev:
> +       v4l2_device_unregister(&radio->v4l2_dev);
> +err_v4l2:
> +       kfree(radio->buffer);
> +       kfree(radio);
> +       return retval;
> +}
> +
> +static void usb_si4713_disconnect(struct usb_interface *intf)
> +{
> +       struct si4713_usb_device *radio = to_si4713_dev(usb_get_intfdata(intf));
> +
> +       dev_info(&intf->dev, "Si4713 development board now disconnected\n");
> +
> +       mutex_lock(&radio->lock);
> +       usb_set_intfdata(intf, NULL);
> +       video_unregister_device(&radio->vdev);
> +       v4l2_device_disconnect(&radio->v4l2_dev);
> +       mutex_unlock(&radio->lock);
> +       v4l2_device_put(&radio->v4l2_dev);
> +}
> +
> +/* USB subsystem interface */
> +static struct usb_driver usb_si4713_driver = {
> +       .name                   = "radio-usb-si4713",
> +       .probe                  = usb_si4713_probe,
> +       .disconnect             = usb_si4713_disconnect,
> +       .id_table               = usb_si4713_usb_device_table,
> +};
> +
> +module_usb_driver(usb_si4713_driver);
> +
> --
> 1.8.4.rc2
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html



-- 
Eduardo Bezerra Valentin
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux