Added a new si4713 directory which will contain all si4713 related files.
Also updated Makefile and Kconfig
Signed-off-by: Dinesh Ram <dinram@xxxxxxxxx>
---
drivers/media/radio/Kconfig | 29 +-
drivers/media/radio/Makefile | 3 +-
drivers/media/radio/radio-si4713.c | 246 ----
drivers/media/radio/si4713-i2c.c | 1532 --------------------
drivers/media/radio/si4713-i2c.h | 238 ---
drivers/media/radio/si4713/Kconfig | 25 +
drivers/media/radio/si4713/Makefile | 7 +
drivers/media/radio/si4713/radio-platform-si4713.c | 246 ++++
drivers/media/radio/si4713/si4713.c | 1532 ++++++++++++++++++++
drivers/media/radio/si4713/si4713.h | 238 +++
10 files changed, 2055 insertions(+), 2041 deletions(-)
delete mode 100644 drivers/media/radio/radio-si4713.c
delete mode 100644 drivers/media/radio/si4713-i2c.c
delete mode 100644 drivers/media/radio/si4713-i2c.h
create mode 100644 drivers/media/radio/si4713/Kconfig
create mode 100644 drivers/media/radio/si4713/Makefile
create mode 100644 drivers/media/radio/si4713/radio-platform-si4713.c
create mode 100644 drivers/media/radio/si4713/si4713.c
create mode 100644 drivers/media/radio/si4713/si4713.h
diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig
index 39882dd..c92d654 100644
--- a/drivers/media/radio/Kconfig
+++ b/drivers/media/radio/Kconfig
@@ -15,6 +15,12 @@ if RADIO_ADAPTERS && VIDEO_V4L2
config RADIO_TEA575X
tristate
+config RADIO_SI4713
+ tristate "Silicon Labs Si4713 FM Radio with RDS Transmitter support"
+ depends on VIDEO_V4L2
+
+source "drivers/media/radio/si4713/Kconfig"
+
config RADIO_SI470X
bool "Silicon Labs Si470x FM Radio Receiver support"
depends on VIDEO_V4L2
@@ -113,29 +119,6 @@ config RADIO_SHARK2
To compile this driver as a module, choose M here: the
module will be called radio-shark2.
-config I2C_SI4713
- tristate "I2C driver for Silicon Labs Si4713 device"
- depends on I2C && VIDEO_V4L2
- ---help---
- Say Y here if you want support to Si4713 I2C device.
- This device driver supports only i2c bus.
-
- To compile this driver as a module, choose M here: the
- module will be called si4713.
-
-config RADIO_SI4713
- tristate "Silicon Labs Si4713 FM Radio Transmitter support"
- depends on I2C && VIDEO_V4L2
- select I2C_SI4713
- ---help---
- Say Y here if you want support to Si4713 FM Radio Transmitter.
- This device can transmit audio through FM. It can transmit
- RDS and RBDS signals as well. This module is the v4l2 radio
- interface for the i2c driver of this device.
-
- To compile this driver as a module, choose M here: the
- module will be called radio-si4713.
-
config USB_KEENE
tristate "Keene FM Transmitter USB support"
depends on USB && VIDEO_V4L2
diff --git a/drivers/media/radio/Makefile b/drivers/media/radio/Makefile
index 3b64560..eb1a3a0 100644
--- a/drivers/media/radio/Makefile
+++ b/drivers/media/radio/Makefile
@@ -17,12 +17,11 @@ obj-$(CONFIG_RADIO_RTRACK) += radio-aimslab.o
obj-$(CONFIG_RADIO_ZOLTRIX) += radio-zoltrix.o
obj-$(CONFIG_RADIO_GEMTEK) += radio-gemtek.o
obj-$(CONFIG_RADIO_TRUST) += radio-trust.o
-obj-$(CONFIG_I2C_SI4713) += si4713-i2c.o
-obj-$(CONFIG_RADIO_SI4713) += radio-si4713.o
obj-$(CONFIG_RADIO_SI476X) += radio-si476x.o
obj-$(CONFIG_RADIO_MIROPCM20) += radio-miropcm20.o
obj-$(CONFIG_USB_DSBR) += dsbr100.o
obj-$(CONFIG_RADIO_SI470X) += si470x/
+obj-$(CONFIG_RADIO_SI4713) += si4713/
obj-$(CONFIG_USB_MR800) += radio-mr800.o
obj-$(CONFIG_USB_KEENE) += radio-keene.o
obj-$(CONFIG_USB_MA901) += radio-ma901.o
diff --git a/drivers/media/radio/radio-si4713.c b/drivers/media/radio/radio-si4713.c
deleted file mode 100644
index ba4cfc9..0000000
--- a/drivers/media/radio/radio-si4713.c
+++ /dev/null
@@ -1,246 +0,0 @@
-/*
- * drivers/media/radio/radio-si4713.c
- *
- * Platform Driver for Silicon Labs Si4713 FM Radio Transmitter:
- *
- * Copyright (c) 2008 Instituto Nokia de Tecnologia - INdT
- * Contact: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/videodev2.h>
-#include <linux/slab.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-common.h>
-#include <media/v4l2-ioctl.h>
-#include <media/v4l2-fh.h>
-#include <media/v4l2-ctrls.h>
-#include <media/v4l2-event.h>
-#include <media/radio-si4713.h>
-
-/* module parameters */
-static int radio_nr = -1; /* radio device minor (-1 ==> auto assign) */
-module_param(radio_nr, int, 0);
-MODULE_PARM_DESC(radio_nr,
- "Minor number for radio device (-1 ==> auto assign)");
-
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Eduardo Valentin <eduardo.valentin@xxxxxxxxx>");
-MODULE_DESCRIPTION("Platform driver for Si4713 FM Radio Transmitter");
-MODULE_VERSION("0.0.1");
-MODULE_ALIAS("platform:radio-si4713");
-
-/* Driver state struct */
-struct radio_si4713_device {
- struct v4l2_device v4l2_dev;
- struct video_device radio_dev;
- struct mutex lock;
-};
-
-/* radio_si4713_fops - file operations interface */
-static const struct v4l2_file_operations radio_si4713_fops = {
- .owner = THIS_MODULE,
- .open = v4l2_fh_open,
- .release = v4l2_fh_release,
- .poll = v4l2_ctrl_poll,
- /* Note: locking is done at the subdev level in the i2c driver. */
- .unlocked_ioctl = video_ioctl2,
-};
-
-/* Video4Linux Interface */
-
-/* radio_si4713_querycap - query device capabilities */
-static int radio_si4713_querycap(struct file *file, void *priv,
- struct v4l2_capability *capability)
-{
- strlcpy(capability->driver, "radio-si4713", sizeof(capability->driver));
- strlcpy(capability->card, "Silicon Labs Si4713 Modulator",
- sizeof(capability->card));
- strlcpy(capability->bus_info, "platform:radio-si4713",
- sizeof(capability->bus_info));
- capability->device_caps = V4L2_CAP_MODULATOR | V4L2_CAP_RDS_OUTPUT;
- capability->capabilities = capability->device_caps | V4L2_CAP_DEVICE_CAPS;
-
- return 0;
-}
-
-/*
- * v4l2 ioctl call backs.
- * we are just a wrapper for v4l2_sub_devs.
- */
-static inline struct v4l2_device *get_v4l2_dev(struct file *file)
-{
- return &((struct radio_si4713_device *)video_drvdata(file))->v4l2_dev;
-}
-
-static int radio_si4713_g_modulator(struct file *file, void *p,
- struct v4l2_modulator *vm)
-{
- return v4l2_device_call_until_err(get_v4l2_dev(file), 0, tuner,
- g_modulator, vm);
-}
-
-static int radio_si4713_s_modulator(struct file *file, void *p,
- const struct v4l2_modulator *vm)
-{
- return v4l2_device_call_until_err(get_v4l2_dev(file), 0, tuner,
- s_modulator, vm);
-}
-
-static int radio_si4713_g_frequency(struct file *file, void *p,
- struct v4l2_frequency *vf)
-{
- return v4l2_device_call_until_err(get_v4l2_dev(file), 0, tuner,
- g_frequency, vf);
-}
-
-static int radio_si4713_s_frequency(struct file *file, void *p,
- const struct v4l2_frequency *vf)
-{
- return v4l2_device_call_until_err(get_v4l2_dev(file), 0, tuner,
- s_frequency, vf);
-}
-
-static long radio_si4713_default(struct file *file, void *p,
- bool valid_prio, unsigned int cmd, void *arg)
-{
- return v4l2_device_call_until_err(get_v4l2_dev(file), 0, core,
- ioctl, cmd, arg);
-}
-
-static struct v4l2_ioctl_ops radio_si4713_ioctl_ops = {
- .vidioc_querycap = radio_si4713_querycap,
- .vidioc_g_modulator = radio_si4713_g_modulator,
- .vidioc_s_modulator = radio_si4713_s_modulator,
- .vidioc_g_frequency = radio_si4713_g_frequency,
- .vidioc_s_frequency = radio_si4713_s_frequency,
- .vidioc_log_status = v4l2_ctrl_log_status,
- .vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
- .vidioc_unsubscribe_event = v4l2_event_unsubscribe,
- .vidioc_default = radio_si4713_default,
-};
-
-/* radio_si4713_vdev_template - video device interface */
-static struct video_device radio_si4713_vdev_template = {
- .fops = &radio_si4713_fops,
- .name = "radio-si4713",
- .release = video_device_release_empty,
- .ioctl_ops = &radio_si4713_ioctl_ops,
- .vfl_dir = VFL_DIR_TX,
-};
-
-/* Platform driver interface */
-/* radio_si4713_pdriver_probe - probe for the device */
-static int radio_si4713_pdriver_probe(struct platform_device *pdev)
-{
- struct radio_si4713_platform_data *pdata = pdev->dev.platform_data;
- struct radio_si4713_device *rsdev;
- struct i2c_adapter *adapter;
- struct v4l2_subdev *sd;
- int rval = 0;
-
- if (!pdata) {
- dev_err(&pdev->dev, "Cannot proceed without platform data.\n");
- rval = -EINVAL;
- goto exit;
- }
-
- rsdev = devm_kzalloc(&pdev->dev, sizeof(*rsdev), GFP_KERNEL);
- if (!rsdev) {
- dev_err(&pdev->dev, "Failed to alloc video device.\n");
- rval = -ENOMEM;
- goto exit;
- }
- mutex_init(&rsdev->lock);
-
- rval = v4l2_device_register(&pdev->dev, &rsdev->v4l2_dev);
- if (rval) {
- dev_err(&pdev->dev, "Failed to register v4l2 device.\n");
- goto exit;
- }
-
- adapter = i2c_get_adapter(pdata->i2c_bus);
- if (!adapter) {
- dev_err(&pdev->dev, "Cannot get i2c adapter %d\n",
- pdata->i2c_bus);
- rval = -ENODEV;
- goto unregister_v4l2_dev;
- }
-
- sd = v4l2_i2c_new_subdev_board(&rsdev->v4l2_dev, adapter,
- pdata->subdev_board_info, NULL);
- if (!sd) {
- dev_err(&pdev->dev, "Cannot get v4l2 subdevice\n");
- rval = -ENODEV;
- goto put_adapter;
- }
-
- rsdev->radio_dev = radio_si4713_vdev_template;
- rsdev->radio_dev.v4l2_dev = &rsdev->v4l2_dev;
- rsdev->radio_dev.ctrl_handler = sd->ctrl_handler;
- set_bit(V4L2_FL_USE_FH_PRIO, &rsdev->radio_dev.flags);
- /* Serialize all access to the si4713 */
- rsdev->radio_dev.lock = &rsdev->lock;
- video_set_drvdata(&rsdev->radio_dev, rsdev);
- if (video_register_device(&rsdev->radio_dev, VFL_TYPE_RADIO, radio_nr)) {
- dev_err(&pdev->dev, "Could not register video device.\n");
- rval = -EIO;
- goto put_adapter;
- }
- dev_info(&pdev->dev, "New device successfully probed\n");
-
- goto exit;
-
-put_adapter:
- i2c_put_adapter(adapter);
-unregister_v4l2_dev:
- v4l2_device_unregister(&rsdev->v4l2_dev);
-exit:
- return rval;
-}
-
-/* radio_si4713_pdriver_remove - remove the device */
-static int radio_si4713_pdriver_remove(struct platform_device *pdev)
-{
- struct v4l2_device *v4l2_dev = platform_get_drvdata(pdev);
- struct v4l2_subdev *sd = list_entry(v4l2_dev->subdevs.next,
- struct v4l2_subdev, list);
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct radio_si4713_device *rsdev;
-
- rsdev = container_of(v4l2_dev, struct radio_si4713_device, v4l2_dev);
- video_unregister_device(&rsdev->radio_dev);
- i2c_put_adapter(client->adapter);
- v4l2_device_unregister(&rsdev->v4l2_dev);
-
- return 0;
-}
-
-static struct platform_driver radio_si4713_pdriver = {
- .driver = {
- .name = "radio-si4713",
- .owner = THIS_MODULE,
- },
- .probe = radio_si4713_pdriver_probe,
- .remove = radio_si4713_pdriver_remove,
-};
-
-module_platform_driver(radio_si4713_pdriver);
diff --git a/drivers/media/radio/si4713-i2c.c b/drivers/media/radio/si4713-i2c.c
deleted file mode 100644
index fe16088..0000000
--- a/drivers/media/radio/si4713-i2c.c
+++ /dev/null
@@ -1,1532 +0,0 @@
-/*
- * drivers/media/radio/si4713-i2c.c
- *
- * Silicon Labs Si4713 FM Radio Transmitter I2C commands.
- *
- * Copyright (c) 2009 Nokia Corporation
- * Contact: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/completion.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/i2c.h>
-#include <linux/slab.h>
-#include <linux/gpio.h>
-#include <linux/regulator/consumer.h>
-#include <linux/module.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-ioctl.h>
-#include <media/v4l2-common.h>
-
-#include "si4713-i2c.h"
-
-/* module parameters */
-static int debug;
-module_param(debug, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(debug, "Debug level (0 - 2)");
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Eduardo Valentin <eduardo.valentin@xxxxxxxxx>");
-MODULE_DESCRIPTION("I2C driver for Si4713 FM Radio Transmitter");
-MODULE_VERSION("0.0.1");
-
-static const char *si4713_supply_names[SI4713_NUM_SUPPLIES] = {
- "vio",
- "vdd",
-};
-
-#define DEFAULT_RDS_PI 0x00
-#define DEFAULT_RDS_PTY 0x00
-#define DEFAULT_RDS_DEVIATION 0x00C8
-#define DEFAULT_RDS_PS_REPEAT_COUNT 0x0003
-#define DEFAULT_LIMITER_RTIME 0x1392
-#define DEFAULT_LIMITER_DEV 0x102CA
-#define DEFAULT_PILOT_FREQUENCY 0x4A38
-#define DEFAULT_PILOT_DEVIATION 0x1A5E
-#define DEFAULT_ACOMP_ATIME 0x0000
-#define DEFAULT_ACOMP_RTIME 0xF4240L
-#define DEFAULT_ACOMP_GAIN 0x0F
-#define DEFAULT_ACOMP_THRESHOLD (-0x28)
-#define DEFAULT_MUTE 0x01
-#define DEFAULT_POWER_LEVEL 88
-#define DEFAULT_FREQUENCY 8800
-#define DEFAULT_PREEMPHASIS FMPE_EU
-#define DEFAULT_TUNE_RNL 0xFF
-
-#define to_si4713_device(sd) container_of(sd, struct si4713_device, sd)
-
-/* frequency domain transformation (using times 10 to avoid floats) */
-#define FREQDEV_UNIT 100000
-#define FREQV4L2_MULTI 625
-#define si4713_to_v4l2(f) ((f * FREQDEV_UNIT) / FREQV4L2_MULTI)
-#define v4l2_to_si4713(f) ((f * FREQV4L2_MULTI) / FREQDEV_UNIT)
-#define FREQ_RANGE_LOW 7600
-#define FREQ_RANGE_HIGH 10800
-
-#define MAX_ARGS 7
-
-#define RDS_BLOCK 8
-#define RDS_BLOCK_CLEAR 0x03
-#define RDS_BLOCK_LOAD 0x04
-#define RDS_RADIOTEXT_2A 0x20
-#define RDS_RADIOTEXT_BLK_SIZE 4
-#define RDS_RADIOTEXT_INDEX_MAX 0x0F
-#define RDS_CARRIAGE_RETURN 0x0D
-
-#define rds_ps_nblocks(len) ((len / RDS_BLOCK) + (len % RDS_BLOCK ? 1 : 0))
-
-#define get_status_bit(p, b, m) (((p) & (m)) >> (b))
-#define set_bits(p, v, b, m) (((p) & ~(m)) | ((v) << (b)))
-
-#define ATTACK_TIME_UNIT 500
-
-#define POWER_OFF 0x00
-#define POWER_ON 0x01
-
-#define msb(x) ((u8)((u16) x >> 8))
-#define lsb(x) ((u8)((u16) x & 0x00FF))
-#define compose_u16(msb, lsb) (((u16)msb << 8) | lsb)
-#define check_command_failed(status) (!(status & SI4713_CTS) || \
- (status & SI4713_ERR))
-/* mute definition */
-#define set_mute(p) ((p & 1) | ((p & 1) << 1));
-
-#ifdef DEBUG
-#define DBG_BUFFER(device, message, buffer, size) \
- { \
- int i; \
- char str[(size)*5]; \
- for (i = 0; i < size; i++) \
- sprintf(str + i * 5, " 0x%02x", buffer[i]); \
- v4l2_dbg(2, debug, device, "%s:%s\n", message, str); \
- }
-#else
-#define DBG_BUFFER(device, message, buffer, size)
-#endif
-
-/*
- * Values for limiter release time (sorted by second column)
- * device release
- * value time (us)
- */
-static long limiter_times[] = {
- 2000, 250,
- 1000, 500,
- 510, 1000,
- 255, 2000,
- 170, 3000,
- 127, 4020,
- 102, 5010,
- 85, 6020,
- 73, 7010,
- 64, 7990,
- 57, 8970,
- 51, 10030,
- 25, 20470,
- 17, 30110,
- 13, 39380,
- 10, 51190,
- 8, 63690,
- 7, 73140,
- 6, 85330,
- 5, 102390,
-};
-
-/*
- * Values for audio compression release time (sorted by second column)
- * device release
- * value time (us)
- */
-static unsigned long acomp_rtimes[] = {
- 0, 100000,
- 1, 200000,
- 2, 350000,
- 3, 525000,
- 4, 1000000,
-};
-
-/*
- * Values for preemphasis (sorted by second column)
- * device preemphasis
- * value value (v4l2)
- */
-static unsigned long preemphasis_values[] = {
- FMPE_DISABLED, V4L2_PREEMPHASIS_DISABLED,
- FMPE_EU, V4L2_PREEMPHASIS_50_uS,
- FMPE_USA, V4L2_PREEMPHASIS_75_uS,
-};
-
-static int usecs_to_dev(unsigned long usecs, unsigned long const array[],
- int size)
-{
- int i;
- int rval = -EINVAL;
-
- for (i = 0; i < size / 2; i++)
- if (array[(i * 2) + 1] >= usecs) {
- rval = array[i * 2];
- break;
- }
-
- return rval;
-}
-
-/* si4713_handler: IRQ handler, just complete work */
-static irqreturn_t si4713_handler(int irq, void *dev)
-{
- struct si4713_device *sdev = dev;
-
- v4l2_dbg(2, debug, &sdev->sd,
- "%s: sending signal to completion work.\n", __func__);
- complete(&sdev->work);
-
- return IRQ_HANDLED;
-}
-
-/*
- * si4713_send_command - sends a command to si4713 and waits its response
- * @sdev: si4713_device structure for the device we are communicating
- * @command: command id
- * @args: command arguments we are sending (up to 7)
- * @argn: actual size of @args
- * @response: buffer to place the expected response from the device (up to 15)
- * @respn: actual size of @response
- * @usecs: amount of time to wait before reading the response (in usecs)
- */
-static int si4713_send_command(struct si4713_device *sdev, const u8 command,
- const u8 args[], const int argn,
- u8 response[], const int respn, const int usecs)
-{
- struct i2c_client *client = v4l2_get_subdevdata(&sdev->sd);
- u8 data1[MAX_ARGS + 1];
- int err;
-
- if (!client->adapter)
- return -ENODEV;
-
- /* First send the command and its arguments */
- data1[0] = command;
- memcpy(data1 + 1, args, argn);
- DBG_BUFFER(&sdev->sd, "Parameters", data1, argn + 1);
-
- err = i2c_master_send(client, data1, argn + 1);
- if (err != argn + 1) {
- v4l2_err(&sdev->sd, "Error while sending command 0x%02x\n",
- command);
- return (err > 0) ? -EIO : err;
- }
-
- /* Wait response from interrupt */
- if (!wait_for_completion_timeout(&sdev->work,
- usecs_to_jiffies(usecs) + 1))
- v4l2_warn(&sdev->sd,
- "(%s) Device took too much time to answer.\n",
- __func__);
-
- /* Then get the response */
- err = i2c_master_recv(client, response, respn);
- if (err != respn) {
- v4l2_err(&sdev->sd,
- "Error while reading response for command 0x%02x\n",
- command);
- return (err > 0) ? -EIO : err;
- }
-
- DBG_BUFFER(&sdev->sd, "Response", response, respn);
- if (check_command_failed(response[0]))
- return -EBUSY;
-
- return 0;
-}
-
-/*
- * si4713_read_property - reads a si4713 property
- * @sdev: si4713_device structure for the device we are communicating
- * @prop: property identification number
- * @pv: property value to be returned on success
- */
-static int si4713_read_property(struct si4713_device *sdev, u16 prop, u32 *pv)
-{
- int err;
- u8 val[SI4713_GET_PROP_NRESP];
- /*
- * .First byte = 0
- * .Second byte = property's MSB
- * .Third byte = property's LSB
- */
- const u8 args[SI4713_GET_PROP_NARGS] = {
- 0x00,
- msb(prop),
- lsb(prop),
- };
-
- err = si4713_send_command(sdev, SI4713_CMD_GET_PROPERTY,
- args, ARRAY_SIZE(args), val,
- ARRAY_SIZE(val), DEFAULT_TIMEOUT);
-
- if (err < 0)
- return err;
-
- *pv = compose_u16(val[2], val[3]);
-
- v4l2_dbg(1, debug, &sdev->sd,
- "%s: property=0x%02x value=0x%02x status=0x%02x\n",
- __func__, prop, *pv, val[0]);
-
- return err;
-}
-
-/*
- * si4713_write_property - modifies a si4713 property
- * @sdev: si4713_device structure for the device we are communicating
- * @prop: property identification number
- * @val: new value for that property
- */
-static int si4713_write_property(struct si4713_device *sdev, u16 prop, u16 val)
-{
- int rval;
- u8 resp[SI4713_SET_PROP_NRESP];
- /*
- * .First byte = 0
- * .Second byte = property's MSB
- * .Third byte = property's LSB
- * .Fourth byte = value's MSB
- * .Fifth byte = value's LSB
- */
- const u8 args[SI4713_SET_PROP_NARGS] = {
- 0x00,
- msb(prop),
- lsb(prop),
- msb(val),
- lsb(val),
- };
-
- rval = si4713_send_command(sdev, SI4713_CMD_SET_PROPERTY,
- args, ARRAY_SIZE(args),
- resp, ARRAY_SIZE(resp),
- DEFAULT_TIMEOUT);
-
- if (rval < 0)
- return rval;
-
- v4l2_dbg(1, debug, &sdev->sd,
- "%s: property=0x%02x value=0x%02x status=0x%02x\n",
- __func__, prop, val, resp[0]);
-
- /*
- * As there is no command response for SET_PROPERTY,
- * wait Tcomp time to finish before proceed, in order
- * to have property properly set.
- */
- msleep(TIMEOUT_SET_PROPERTY);
-
- return rval;
-}
-
-/*
- * si4713_powerup - Powers the device up
- * @sdev: si4713_device structure for the device we are communicating
- */
-static int si4713_powerup(struct si4713_device *sdev)
-{
- int err;
- u8 resp[SI4713_PWUP_NRESP];
- /*
- * .First byte = Enabled interrupts and boot function
- * .Second byte = Input operation mode
- */
- const u8 args[SI4713_PWUP_NARGS] = {
- SI4713_PWUP_CTSIEN | SI4713_PWUP_GPO2OEN | SI4713_PWUP_FUNC_TX,
- SI4713_PWUP_OPMOD_ANALOG,
- };
-
- if (sdev->power_state)
- return 0;
-
- err = regulator_bulk_enable(ARRAY_SIZE(sdev->supplies),
- sdev->supplies);
- if (err) {
- v4l2_err(&sdev->sd, "Failed to enable supplies: %d\n", err);
- return err;
- }
- if (gpio_is_valid(sdev->gpio_reset)) {
- udelay(50);
- gpio_set_value(sdev->gpio_reset, 1);
- }
-
- err = si4713_send_command(sdev, SI4713_CMD_POWER_UP,
- args, ARRAY_SIZE(args),
- resp, ARRAY_SIZE(resp),
- TIMEOUT_POWER_UP);
-
- if (!err) {
- v4l2_dbg(1, debug, &sdev->sd, "Powerup response: 0x%02x\n",
- resp[0]);
- v4l2_dbg(1, debug, &sdev->sd, "Device in power up mode\n");
- sdev->power_state = POWER_ON;
-
- err = si4713_write_property(sdev, SI4713_GPO_IEN,
- SI4713_STC_INT | SI4713_CTS);
- } else {
- if (gpio_is_valid(sdev->gpio_reset))
- gpio_set_value(sdev->gpio_reset, 0);
- err = regulator_bulk_disable(ARRAY_SIZE(sdev->supplies),
- sdev->supplies);
- if (err)
- v4l2_err(&sdev->sd,
- "Failed to disable supplies: %d\n", err);
- }
-
- return err;
-}
-
-/*
- * si4713_powerdown - Powers the device down
- * @sdev: si4713_device structure for the device we are communicating
- */
-static int si4713_powerdown(struct si4713_device *sdev)
-{
- int err;
- u8 resp[SI4713_PWDN_NRESP];
-
- if (!sdev->power_state)
- return 0;
-
- err = si4713_send_command(sdev, SI4713_CMD_POWER_DOWN,
- NULL, 0,
- resp, ARRAY_SIZE(resp),
- DEFAULT_TIMEOUT);
-
- if (!err) {
- v4l2_dbg(1, debug, &sdev->sd, "Power down response: 0x%02x\n",
- resp[0]);
- v4l2_dbg(1, debug, &sdev->sd, "Device in reset mode\n");
- if (gpio_is_valid(sdev->gpio_reset))
- gpio_set_value(sdev->gpio_reset, 0);
- err = regulator_bulk_disable(ARRAY_SIZE(sdev->supplies),
- sdev->supplies);
- if (err)
- v4l2_err(&sdev->sd,
- "Failed to disable supplies: %d\n", err);
- sdev->power_state = POWER_OFF;
- }
-
- return err;
-}
-
-/*
- * si4713_checkrev - Checks if we are treating a device with the correct rev.
- * @sdev: si4713_device structure for the device we are communicating
- */
-static int si4713_checkrev(struct si4713_device *sdev)
-{
- struct i2c_client *client = v4l2_get_subdevdata(&sdev->sd);
- int rval;
- u8 resp[SI4713_GETREV_NRESP];
-
- rval = si4713_send_command(sdev, SI4713_CMD_GET_REV,
- NULL, 0,
- resp, ARRAY_SIZE(resp),
- DEFAULT_TIMEOUT);
-
- if (rval < 0)
- return rval;
-
- if (resp[1] == SI4713_PRODUCT_NUMBER) {
- v4l2_info(&sdev->sd, "chip found @ 0x%02x (%s)\n",
- client->addr << 1, client->adapter->name);
- } else {
- v4l2_err(&sdev->sd, "Invalid product number\n");
- rval = -EINVAL;
- }
- return rval;
-}
-
-/*
- * si4713_wait_stc - Waits STC interrupt and clears status bits. Useful
- * for TX_TUNE_POWER, TX_TUNE_FREQ and TX_TUNE_MEAS
- * @sdev: si4713_device structure for the device we are communicating
- * @usecs: timeout to wait for STC interrupt signal
- */
-static int si4713_wait_stc(struct si4713_device *sdev, const int usecs)
-{
- int err;
- u8 resp[SI4713_GET_STATUS_NRESP];
-
- /* Wait response from STC interrupt */
- if (!wait_for_completion_timeout(&sdev->work,
- usecs_to_jiffies(usecs) + 1))
- v4l2_warn(&sdev->sd,
- "%s: device took too much time to answer (%d usec).\n",
- __func__, usecs);
-
- /* Clear status bits */
- err = si4713_send_command(sdev, SI4713_CMD_GET_INT_STATUS,
- NULL, 0,
- resp, ARRAY_SIZE(resp),
- DEFAULT_TIMEOUT);
-
- if (err < 0)
- goto exit;
-
- v4l2_dbg(1, debug, &sdev->sd,
- "%s: status bits: 0x%02x\n", __func__, resp[0]);
-
- if (!(resp[0] & SI4713_STC_INT))
- err = -EIO;
-
-exit:
- return err;
-}
-
-/*
- * si4713_tx_tune_freq - Sets the state of the RF carrier and sets the tuning
- * frequency between 76 and 108 MHz in 10 kHz units and
- * steps of 50 kHz.
- * @sdev: si4713_device structure for the device we are communicating
- * @frequency: desired frequency (76 - 108 MHz, unit 10 KHz, step 50 kHz)
- */
-static int si4713_tx_tune_freq(struct si4713_device *sdev, u16 frequency)
-{
- int err;
- u8 val[SI4713_TXFREQ_NRESP];
- /*
- * .First byte = 0
- * .Second byte = frequency's MSB
- * .Third byte = frequency's LSB
- */
- const u8 args[SI4713_TXFREQ_NARGS] = {
- 0x00,
- msb(frequency),
- lsb(frequency),
- };
-
- err = si4713_send_command(sdev, SI4713_CMD_TX_TUNE_FREQ,
- args, ARRAY_SIZE(args), val,
- ARRAY_SIZE(val), DEFAULT_TIMEOUT);
-
- if (err < 0)
- return err;
-
- v4l2_dbg(1, debug, &sdev->sd,
- "%s: frequency=0x%02x status=0x%02x\n", __func__,
- frequency, val[0]);
-
- err = si4713_wait_stc(sdev, TIMEOUT_TX_TUNE);
- if (err < 0)
- return err;
-
- return compose_u16(args[1], args[2]);
-}
-
-/*
- * si4713_tx_tune_power - Sets the RF voltage level between 88 and 115 dBuV in
- * 1 dB units. A value of 0x00 indicates off. The command
- * also sets the antenna tuning capacitance. A value of 0
- * indicates autotuning, and a value of 1 - 191 indicates
- * a manual override, which results in a tuning
- * capacitance of 0.25 pF x @antcap.
- * @sdev: si4713_device structure for the device we are communicating
- * @power: tuning power (88 - 115 dBuV, unit/step 1 dB)
- * @antcap: value of antenna tuning capacitor (0 - 191)
- */
-static int si4713_tx_tune_power(struct si4713_device *sdev, u8 power,
- u8 antcap)
-{
- int err;
- u8 val[SI4713_TXPWR_NRESP];
- /*
- * .First byte = 0
- * .Second byte = 0
- * .Third byte = power
- * .Fourth byte = antcap
- */
- const u8 args[SI4713_TXPWR_NARGS] = {
- 0x00,
- 0x00,
- power,
- antcap,
- };
-
- if (((power > 0) && (power < SI4713_MIN_POWER)) ||
- power > SI4713_MAX_POWER || antcap > SI4713_MAX_ANTCAP)
- return -EDOM;
-
- err = si4713_send_command(sdev, SI4713_CMD_TX_TUNE_POWER,
- args, ARRAY_SIZE(args), val,
- ARRAY_SIZE(val), DEFAULT_TIMEOUT);
-
- if (err < 0)
- return err;
-
- v4l2_dbg(1, debug, &sdev->sd,
- "%s: power=0x%02x antcap=0x%02x status=0x%02x\n",
- __func__, power, antcap, val[0]);
-
- return si4713_wait_stc(sdev, TIMEOUT_TX_TUNE_POWER);
-}
-
-/*
- * si4713_tx_tune_measure - Enters receive mode and measures the received noise
- * level in units of dBuV on the selected frequency.
- * The Frequency must be between 76 and 108 MHz in 10 kHz
- * units and steps of 50 kHz. The command also sets the
- * antenna tuning capacitance. A value of 0 means
- * autotuning, and a value of 1 to 191 indicates manual
- * override.
- * @sdev: si4713_device structure for the device we are communicating
- * @frequency: desired frequency (76 - 108 MHz, unit 10 KHz, step 50 kHz)
- * @antcap: value of antenna tuning capacitor (0 - 191)
- */
-static int si4713_tx_tune_measure(struct si4713_device *sdev, u16 frequency,
- u8 antcap)
-{
- int err;
- u8 val[SI4713_TXMEA_NRESP];
- /*
- * .First byte = 0
- * .Second byte = frequency's MSB
- * .Third byte = frequency's LSB
- * .Fourth byte = antcap
- */
- const u8 args[SI4713_TXMEA_NARGS] = {
- 0x00,
- msb(frequency),
- lsb(frequency),
- antcap,
- };
-
- sdev->tune_rnl = DEFAULT_TUNE_RNL;
-
- if (antcap > SI4713_MAX_ANTCAP)
- return -EDOM;
-
- err = si4713_send_command(sdev, SI4713_CMD_TX_TUNE_MEASURE,
- args, ARRAY_SIZE(args), val,
- ARRAY_SIZE(val), DEFAULT_TIMEOUT);
-
- if (err < 0)
- return err;
-
- v4l2_dbg(1, debug, &sdev->sd,
- "%s: frequency=0x%02x antcap=0x%02x status=0x%02x\n",
- __func__, frequency, antcap, val[0]);
-
- return si4713_wait_stc(sdev, TIMEOUT_TX_TUNE);
-}
-
-/*
- * si4713_tx_tune_status- Returns the status of the tx_tune_freq, tx_tune_mea or
- * tx_tune_power commands. This command return the current
- * frequency, output voltage in dBuV, the antenna tunning
- * capacitance value and the received noise level. The
- * command also clears the stcint interrupt bit when the
- * first bit of its arguments is high.
- * @sdev: si4713_device structure for the device we are communicating
- * @intack: 0x01 to clear the seek/tune complete interrupt status indicator.
- * @frequency: returned frequency
- * @power: returned power
- * @antcap: returned antenna capacitance
- * @noise: returned noise level
- */
-static int si4713_tx_tune_status(struct si4713_device *sdev, u8 intack,
- u16 *frequency, u8 *power,
- u8 *antcap, u8 *noise)
-{
- int err;
- u8 val[SI4713_TXSTATUS_NRESP];
- /*
- * .First byte = intack bit
- */
- const u8 args[SI4713_TXSTATUS_NARGS] = {
- intack & SI4713_INTACK_MASK,
- };
-
- err = si4713_send_command(sdev, SI4713_CMD_TX_TUNE_STATUS,
- args, ARRAY_SIZE(args), val,
- ARRAY_SIZE(val), DEFAULT_TIMEOUT);
-
- if (!err) {
- v4l2_dbg(1, debug, &sdev->sd,
- "%s: status=0x%02x\n", __func__, val[0]);
- *frequency = compose_u16(val[2], val[3]);
- sdev->frequency = *frequency;
- *power = val[5];
- *antcap = val[6];
- *noise = val[7];
- v4l2_dbg(1, debug, &sdev->sd, "%s: response: %d x 10 kHz "
- "(power %d, antcap %d, rnl %d)\n", __func__,
- *frequency, *power, *antcap, *noise);
- }
-
- return err;
-}
-
-/*
- * si4713_tx_rds_buff - Loads the RDS group buffer FIFO or circular buffer.
- * @sdev: si4713_device structure for the device we are communicating
- * @mode: the buffer operation mode.
- * @rdsb: RDS Block B
- * @rdsc: RDS Block C
- * @rdsd: RDS Block D
- * @cbleft: returns the number of available circular buffer blocks minus the
- * number of used circular buffer blocks.
- */
-static int si4713_tx_rds_buff(struct si4713_device *sdev, u8 mode, u16 rdsb,
- u16 rdsc, u16 rdsd, s8 *cbleft)
-{
- int err;
- u8 val[SI4713_RDSBUFF_NRESP];
-
- const u8 args[SI4713_RDSBUFF_NARGS] = {
- mode & SI4713_RDSBUFF_MODE_MASK,
- msb(rdsb),
- lsb(rdsb),
- msb(rdsc),
- lsb(rdsc),
- msb(rdsd),
- lsb(rdsd),
- };
-
- err = si4713_send_command(sdev, SI4713_CMD_TX_RDS_BUFF,
- args, ARRAY_SIZE(args), val,
- ARRAY_SIZE(val), DEFAULT_TIMEOUT);
-
- if (!err) {
- v4l2_dbg(1, debug, &sdev->sd,
- "%s: status=0x%02x\n", __func__, val[0]);
- *cbleft = (s8)val[2] - val[3];
- v4l2_dbg(1, debug, &sdev->sd, "%s: response: interrupts"
- " 0x%02x cb avail: %d cb used %d fifo avail"
- " %d fifo used %d\n", __func__, val[1],
- val[2], val[3], val[4], val[5]);
- }
-
- return err;
-}
-
-/*
- * si4713_tx_rds_ps - Loads the program service buffer.
- * @sdev: si4713_device structure for the device we are communicating
- * @psid: program service id to be loaded.
- * @pschar: assumed 4 size char array to be loaded into the program service
- */
-static int si4713_tx_rds_ps(struct si4713_device *sdev, u8 psid,
- unsigned char *pschar)
-{
- int err;
- u8 val[SI4713_RDSPS_NRESP];
-
- const u8 args[SI4713_RDSPS_NARGS] = {
- psid & SI4713_RDSPS_PSID_MASK,
- pschar[0],
- pschar[1],
- pschar[2],
- pschar[3],
- };
-
- err = si4713_send_command(sdev, SI4713_CMD_TX_RDS_PS,
- args, ARRAY_SIZE(args), val,
- ARRAY_SIZE(val), DEFAULT_TIMEOUT);
-
- if (err < 0)
- return err;
-
- v4l2_dbg(1, debug, &sdev->sd, "%s: status=0x%02x\n", __func__, val[0]);
-
- return err;
-}
-
-static int si4713_set_power_state(struct si4713_device *sdev, u8 value)
-{
- if (value)
- return si4713_powerup(sdev);
- return si4713_powerdown(sdev);
-}
-
-static int si4713_set_mute(struct si4713_device *sdev, u16 mute)
-{
- int rval = 0;
-
- mute = set_mute(mute);
-
- if (sdev->power_state)
- rval = si4713_write_property(sdev,
- SI4713_TX_LINE_INPUT_MUTE, mute);
-
- return rval;
-}
-
-static int si4713_set_rds_ps_name(struct si4713_device *sdev, char *ps_name)
-{
- int rval = 0, i;
- u8 len = 0;
-
- /* We want to clear the whole thing */
- if (!strlen(ps_name))
- memset(ps_name, 0, MAX_RDS_PS_NAME + 1);
-
- if (sdev->power_state) {
- /* Write the new ps name and clear the padding */
- for (i = 0; i < MAX_RDS_PS_NAME; i += (RDS_BLOCK / 2)) {
- rval = si4713_tx_rds_ps(sdev, (i / (RDS_BLOCK / 2)),
- ps_name + i);
- if (rval < 0)
- return rval;
- }
-
- /* Setup the size to be sent */
- if (strlen(ps_name))
- len = strlen(ps_name) - 1;
- else
- len = 1;
-
- rval = si4713_write_property(sdev,
- SI4713_TX_RDS_PS_MESSAGE_COUNT,
- rds_ps_nblocks(len));
- if (rval < 0)
- return rval;
-
- rval = si4713_write_property(sdev,
- SI4713_TX_RDS_PS_REPEAT_COUNT,
- DEFAULT_RDS_PS_REPEAT_COUNT * 2);
- if (rval < 0)
- return rval;
- }
-
- return rval;
-}
-
-static int si4713_set_rds_radio_text(struct si4713_device *sdev, char *rt)
-{
- int rval = 0, i;
- u16 t_index = 0;
- u8 b_index = 0, cr_inserted = 0;
- s8 left;
-
- if (!sdev->power_state)
- return rval;
-
- rval = si4713_tx_rds_buff(sdev, RDS_BLOCK_CLEAR, 0, 0, 0, &left);
- if (rval < 0)
- return rval;
-
- if (!strlen(rt))
- return rval;
-
- do {
- /* RDS spec says that if the last block isn't used,
- * then apply a carriage return
- */
- if (t_index < (RDS_RADIOTEXT_INDEX_MAX * RDS_RADIOTEXT_BLK_SIZE)) {
- for (i = 0; i < RDS_RADIOTEXT_BLK_SIZE; i++) {
- if (!rt[t_index + i] ||
- rt[t_index + i] == RDS_CARRIAGE_RETURN) {
- rt[t_index + i] = RDS_CARRIAGE_RETURN;
- cr_inserted = 1;
- break;
- }
- }
- }
-
- rval = si4713_tx_rds_buff(sdev, RDS_BLOCK_LOAD,
- compose_u16(RDS_RADIOTEXT_2A, b_index++),
- compose_u16(rt[t_index], rt[t_index + 1]),
- compose_u16(rt[t_index + 2], rt[t_index + 3]),
- &left);
- if (rval < 0)
- return rval;
-
- t_index += RDS_RADIOTEXT_BLK_SIZE;
-
- if (cr_inserted)
- break;
- } while (left > 0);
-
- return rval;
-}
-
-/*
- * si4713_update_tune_status - update properties from tx_tune_status
- * command. Must be called with sdev->mutex held.
- * @sdev: si4713_device structure for the device we are communicating
- */
-static int si4713_update_tune_status(struct si4713_device *sdev)
-{
- int rval;
- u16 f = 0;
- u8 p = 0, a = 0, n = 0;
-
- rval = si4713_tx_tune_status(sdev, 0x00, &f, &p, &a, &n);
-
- if (rval < 0)
- goto exit;
-
-/* TODO: check that power_level and antenna_capacitor really are not
- changed by the hardware. If they are, then these controls should become
- volatiles.
- sdev->power_level = p;
- sdev->antenna_capacitor = a;*/
- sdev->tune_rnl = n;
-
-exit:
- return rval;
-}
-
-static int si4713_choose_econtrol_action(struct si4713_device *sdev, u32 id,
- s32 *bit, s32 *mask, u16 *property, int *mul,
- unsigned long **table, int *size)
-{
- s32 rval = 0;
-
- switch (id) {
- /* FM_TX class controls */
- case V4L2_CID_RDS_TX_PI:
- *property = SI4713_TX_RDS_PI;
- *mul = 1;
- break;
- case V4L2_CID_AUDIO_COMPRESSION_THRESHOLD:
- *property = SI4713_TX_ACOMP_THRESHOLD;
- *mul = 1;
- break;
- case V4L2_CID_AUDIO_COMPRESSION_GAIN:
- *property = SI4713_TX_ACOMP_GAIN;
- *mul = 1;
- break;
- case V4L2_CID_PILOT_TONE_FREQUENCY:
- *property = SI4713_TX_PILOT_FREQUENCY;
- *mul = 1;
- break;
- case V4L2_CID_AUDIO_COMPRESSION_ATTACK_TIME:
- *property = SI4713_TX_ACOMP_ATTACK_TIME;
- *mul = ATTACK_TIME_UNIT;
- break;
- case V4L2_CID_PILOT_TONE_DEVIATION:
- *property = SI4713_TX_PILOT_DEVIATION;
- *mul = 10;
- break;
- case V4L2_CID_AUDIO_LIMITER_DEVIATION:
- *property = SI4713_TX_AUDIO_DEVIATION;
- *mul = 10;
- break;
- case V4L2_CID_RDS_TX_DEVIATION:
- *property = SI4713_TX_RDS_DEVIATION;
- *mul = 1;
- break;
-
- case V4L2_CID_RDS_TX_PTY:
- *property = SI4713_TX_RDS_PS_MISC;
- *bit = 5;
- *mask = 0x1F << 5;
- break;
- case V4L2_CID_AUDIO_LIMITER_ENABLED:
- *property = SI4713_TX_ACOMP_ENABLE;
- *bit = 1;
- *mask = 1 << 1;
- break;
- case V4L2_CID_AUDIO_COMPRESSION_ENABLED:
- *property = SI4713_TX_ACOMP_ENABLE;
- *bit = 0;
- *mask = 1 << 0;
- break;
- case V4L2_CID_PILOT_TONE_ENABLED:
- *property = SI4713_TX_COMPONENT_ENABLE;
- *bit = 0;
- *mask = 1 << 0;
- break;
-
- case V4L2_CID_AUDIO_LIMITER_RELEASE_TIME:
- *property = SI4713_TX_LIMITER_RELEASE_TIME;
- *table = limiter_times;
- *size = ARRAY_SIZE(limiter_times);
- break;
- case V4L2_CID_AUDIO_COMPRESSION_RELEASE_TIME:
- *property = SI4713_TX_ACOMP_RELEASE_TIME;
- *table = acomp_rtimes;
- *size = ARRAY_SIZE(acomp_rtimes);
- break;
- case V4L2_CID_TUNE_PREEMPHASIS:
- *property = SI4713_TX_PREEMPHASIS;
- *table = preemphasis_values;
- *size = ARRAY_SIZE(preemphasis_values);
- break;
-
- default:
- rval = -EINVAL;
- break;
- }
-
- return rval;
-}
-
-static int si4713_s_frequency(struct v4l2_subdev *sd, const struct v4l2_frequency *f);
-static int si4713_s_modulator(struct v4l2_subdev *sd, const struct v4l2_modulator *);
-/*
- * si4713_setup - Sets the device up with current configuration.
- * @sdev: si4713_device structure for the device we are communicating
- */
-static int si4713_setup(struct si4713_device *sdev)
-{
- struct v4l2_frequency f;
- struct v4l2_modulator vm;
- int rval;
-
- /* Device procedure needs to set frequency first */
- f.tuner = 0;
- f.frequency = sdev->frequency ? sdev->frequency : DEFAULT_FREQUENCY;
- f.frequency = si4713_to_v4l2(f.frequency);
- rval = si4713_s_frequency(&sdev->sd, &f);
-
- vm.index = 0;
- if (sdev->stereo)
- vm.txsubchans = V4L2_TUNER_SUB_STEREO;
- else
- vm.txsubchans = V4L2_TUNER_SUB_MONO;
- if (sdev->rds_enabled)
- vm.txsubchans |= V4L2_TUNER_SUB_RDS;
- si4713_s_modulator(&sdev->sd, &vm);
-
- return rval;
-}
-
-/*
- * si4713_initialize - Sets the device up with default configuration.
- * @sdev: si4713_device structure for the device we are communicating
- */
-static int si4713_initialize(struct si4713_device *sdev)
-{
- int rval;
-
- rval = si4713_set_power_state(sdev, POWER_ON);
- if (rval < 0)
- return rval;
-
- rval = si4713_checkrev(sdev);
- if (rval < 0)
- return rval;
-
- rval = si4713_set_power_state(sdev, POWER_OFF);
- if (rval < 0)
- return rval;
-
-
- sdev->frequency = DEFAULT_FREQUENCY;
- sdev->stereo = 1;
- sdev->tune_rnl = DEFAULT_TUNE_RNL;
- return 0;
-}
-
-/* si4713_s_ctrl - set the value of a control */
-static int si4713_s_ctrl(struct v4l2_ctrl *ctrl)
-{
- struct si4713_device *sdev =
- container_of(ctrl->handler, struct si4713_device, ctrl_handler);
- u32 val = 0;
- s32 bit = 0, mask = 0;
- u16 property = 0;
- int mul = 0;
- unsigned long *table = NULL;
- int size = 0;
- bool force = false;
- int c;
- int ret = 0;
-
- if (ctrl->id != V4L2_CID_AUDIO_MUTE)
- return -EINVAL;
- if (ctrl->is_new) {
- if (ctrl->val) {
- ret = si4713_set_mute(sdev, ctrl->val);
- if (!ret)
- ret = si4713_set_power_state(sdev, POWER_DOWN);
- return ret;
- }
- ret = si4713_set_power_state(sdev, POWER_UP);
- if (!ret)
- ret = si4713_set_mute(sdev, ctrl->val);
- if (!ret)
- ret = si4713_setup(sdev);
- if (ret)
- return ret;
- force = true;
- }
-
- if (!sdev->power_state)
- return 0;
-
- for (c = 1; !ret && c < ctrl->ncontrols; c++) {
- ctrl = ctrl->cluster[c];
-
- if (!force && !ctrl->is_new)
- continue;
-
- switch (ctrl->id) {
- case V4L2_CID_RDS_TX_PS_NAME:
- ret = si4713_set_rds_ps_name(sdev, ctrl->string);
- break;
-
- case V4L2_CID_RDS_TX_RADIO_TEXT:
- ret = si4713_set_rds_radio_text(sdev, ctrl->string);
- break;
-
- case V4L2_CID_TUNE_ANTENNA_CAPACITOR:
- /* don't handle this control if we force setting all
- * controls since in that case it will be handled by
- * V4L2_CID_TUNE_POWER_LEVEL. */
- if (force)
- break;
- /* fall through */
- case V4L2_CID_TUNE_POWER_LEVEL:
- ret = si4713_tx_tune_power(sdev,
- sdev->tune_pwr_level->val, sdev->tune_ant_cap->val);
- if (!ret) {
- /* Make sure we don't set this twice */
- sdev->tune_ant_cap->is_new = false;
- sdev->tune_pwr_level->is_new = false;
- }
- break;
-
- default:
- ret = si4713_choose_econtrol_action(sdev, ctrl->id, &bit,
- &mask, &property, &mul, &table, &size);
- if (ret < 0)
- break;
-
- val = ctrl->val;
- if (mul) {
- val = val / mul;
- } else if (table) {
- ret = usecs_to_dev(val, table, size);
- if (ret < 0)
- break;
- val = ret;
- ret = 0;
- }
-
- if (mask) {
- ret = si4713_read_property(sdev, property, &val);
- if (ret < 0)
- break;
- val = set_bits(val, ctrl->val, bit, mask);
- }
-
- ret = si4713_write_property(sdev, property, val);
- if (ret < 0)
- break;
- if (mask)
- val = ctrl->val;
- break;
- }
- }
-
- return ret;
-}
-
-/* si4713_ioctl - deal with private ioctls (only rnl for now) */
-static long si4713_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
-{
- struct si4713_device *sdev = to_si4713_device(sd);
- struct si4713_rnl *rnl = arg;
- u16 frequency;
- int rval = 0;
-
- if (!arg)
- return -EINVAL;
-
- switch (cmd) {
- case SI4713_IOC_MEASURE_RNL:
- frequency = v4l2_to_si4713(rnl->frequency);
-
- if (sdev->power_state) {
- /* Set desired measurement frequency */
- rval = si4713_tx_tune_measure(sdev, frequency, 0);
- if (rval < 0)
- return rval;
- /* get results from tune status */
- rval = si4713_update_tune_status(sdev);
- if (rval < 0)
- return rval;
- }
- rnl->rnl = sdev->tune_rnl;
- break;
-
- default:
- /* nothing */
- rval = -ENOIOCTLCMD;
- }
-
- return rval;
-}
-
-/* si4713_g_modulator - get modulator attributes */
-static int si4713_g_modulator(struct v4l2_subdev *sd, struct v4l2_modulator *vm)
-{
- struct si4713_device *sdev = to_si4713_device(sd);
- int rval = 0;
-
- if (!sdev)
- return -ENODEV;
-
- if (vm->index > 0)
- return -EINVAL;
-
- strncpy(vm->name, "FM Modulator", 32);
- vm->capability = V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LOW |
- V4L2_TUNER_CAP_RDS | V4L2_TUNER_CAP_RDS_CONTROLS;
-
- /* Report current frequency range limits */
- vm->rangelow = si4713_to_v4l2(FREQ_RANGE_LOW);
- vm->rangehigh = si4713_to_v4l2(FREQ_RANGE_HIGH);
-
- if (sdev->power_state) {
- u32 comp_en = 0;
-
- rval = si4713_read_property(sdev, SI4713_TX_COMPONENT_ENABLE,
- &comp_en);
- if (rval < 0)
- return rval;
-
- sdev->stereo = get_status_bit(comp_en, 1, 1 << 1);
- }
-
- /* Report current audio mode: mono or stereo */
- if (sdev->stereo)
- vm->txsubchans = V4L2_TUNER_SUB_STEREO;
- else
- vm->txsubchans = V4L2_TUNER_SUB_MONO;
-
- /* Report rds feature status */
- if (sdev->rds_enabled)
- vm->txsubchans |= V4L2_TUNER_SUB_RDS;
- else
- vm->txsubchans &= ~V4L2_TUNER_SUB_RDS;
-
- return rval;
-}
-
-/* si4713_s_modulator - set modulator attributes */
-static int si4713_s_modulator(struct v4l2_subdev *sd, const struct v4l2_modulator *vm)
-{
- struct si4713_device *sdev = to_si4713_device(sd);
- int rval = 0;
- u16 stereo, rds;
- u32 p;
-
- if (!sdev)
- return -ENODEV;
-
- if (vm->index > 0)
- return -EINVAL;
-
- /* Set audio mode: mono or stereo */
- if (vm->txsubchans & V4L2_TUNER_SUB_STEREO)
- stereo = 1;
- else if (vm->txsubchans & V4L2_TUNER_SUB_MONO)
- stereo = 0;
- else
- return -EINVAL;
-
- rds = !!(vm->txsubchans & V4L2_TUNER_SUB_RDS);
-
- if (sdev->power_state) {
- rval = si4713_read_property(sdev,
- SI4713_TX_COMPONENT_ENABLE, &p);
- if (rval < 0)
- return rval;
-
- p = set_bits(p, stereo, 1, 1 << 1);
- p = set_bits(p, rds, 2, 1 << 2);
-
- rval = si4713_write_property(sdev,
- SI4713_TX_COMPONENT_ENABLE, p);
- if (rval < 0)
- return rval;
- }
-
- sdev->stereo = stereo;
- sdev->rds_enabled = rds;
-
- return rval;
-}
-
-/* si4713_g_frequency - get tuner or modulator radio frequency */
-static int si4713_g_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *f)
-{
- struct si4713_device *sdev = to_si4713_device(sd);
- int rval = 0;
-
- if (f->tuner)
- return -EINVAL;
-
- if (sdev->power_state) {
- u16 freq;
- u8 p, a, n;
-
- rval = si4713_tx_tune_status(sdev, 0x00, &freq, &p, &a, &n);
- if (rval < 0)
- return rval;
-
- sdev->frequency = freq;
- }
-
- f->frequency = si4713_to_v4l2(sdev->frequency);
-
- return rval;
-}
-
-/* si4713_s_frequency - set tuner or modulator radio frequency */
-static int si4713_s_frequency(struct v4l2_subdev *sd, const struct v4l2_frequency *f)
-{
- struct si4713_device *sdev = to_si4713_device(sd);
- int rval = 0;
- u16 frequency = v4l2_to_si4713(f->frequency);
-
- if (f->tuner)
- return -EINVAL;
-
- /* Check frequency range */
- frequency = clamp_t(u16, frequency, FREQ_RANGE_LOW, FREQ_RANGE_HIGH);
-
- if (sdev->power_state) {
- rval = si4713_tx_tune_freq(sdev, frequency);
- if (rval < 0)
- return rval;
- frequency = rval;
- rval = 0;
- }
- sdev->frequency = frequency;
-
- return rval;
-}
-
-static const struct v4l2_ctrl_ops si4713_ctrl_ops = {
- .s_ctrl = si4713_s_ctrl,
-};
-
-static const struct v4l2_subdev_core_ops si4713_subdev_core_ops = {
- .ioctl = si4713_ioctl,
-};
-
-static const struct v4l2_subdev_tuner_ops si4713_subdev_tuner_ops = {
- .g_frequency = si4713_g_frequency,
- .s_frequency = si4713_s_frequency,
- .g_modulator = si4713_g_modulator,
- .s_modulator = si4713_s_modulator,
-};
-
-static const struct v4l2_subdev_ops si4713_subdev_ops = {
- .core = &si4713_subdev_core_ops,
- .tuner = &si4713_subdev_tuner_ops,
-};
-
-/*
- * I2C driver interface
- */
-/* si4713_probe - probe for the device */
-static int si4713_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
-{
- struct si4713_device *sdev;
- struct si4713_platform_data *pdata = client->dev.platform_data;
- struct v4l2_ctrl_handler *hdl;
- int rval, i;
-
- sdev = kzalloc(sizeof *sdev, GFP_KERNEL);
- if (!sdev) {
- dev_err(&client->dev, "Failed to alloc video device.\n");
- rval = -ENOMEM;
- goto exit;
- }
-
- sdev->gpio_reset = -1;
- if (pdata && gpio_is_valid(pdata->gpio_reset)) {
- rval = gpio_request(pdata->gpio_reset, "si4713 reset");
- if (rval) {
- dev_err(&client->dev,
- "Failed to request gpio: %d\n", rval);
- goto free_sdev;
- }
- sdev->gpio_reset = pdata->gpio_reset;
- gpio_direction_output(sdev->gpio_reset, 0);
- }
-
- for (i = 0; i < ARRAY_SIZE(sdev->supplies); i++)
- sdev->supplies[i].supply = si4713_supply_names[i];
-
- rval = regulator_bulk_get(&client->dev, ARRAY_SIZE(sdev->supplies),
- sdev->supplies);
- if (rval) {
- dev_err(&client->dev, "Cannot get regulators: %d\n", rval);
- goto free_gpio;
- }
-
- v4l2_i2c_subdev_init(&sdev->sd, client, &si4713_subdev_ops);
-
- init_completion(&sdev->work);
-
- hdl = &sdev->ctrl_handler;
- v4l2_ctrl_handler_init(hdl, 20);
- sdev->mute = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
- V4L2_CID_AUDIO_MUTE, 0, 1, 1, DEFAULT_MUTE);
-
- sdev->rds_pi = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
- V4L2_CID_RDS_TX_PI, 0, 0xffff, 1, DEFAULT_RDS_PI);
- sdev->rds_pty = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
- V4L2_CID_RDS_TX_PTY, 0, 31, 1, DEFAULT_RDS_PTY);
- sdev->rds_deviation = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
- V4L2_CID_RDS_TX_DEVIATION, 0, MAX_RDS_DEVIATION,
- 10, DEFAULT_RDS_DEVIATION);
- /*
- * Report step as 8. From RDS spec, psname
- * should be 8. But there are receivers which scroll strings
- * sized as 8xN.
- */
- sdev->rds_ps_name = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
- V4L2_CID_RDS_TX_PS_NAME, 0, MAX_RDS_PS_NAME, 8, 0);
- /*
- * Report step as 32 (2A block). From RDS spec,
- * radio text should be 32 for 2A block. But there are receivers
- * which scroll strings sized as 32xN. Setting default to 32.
- */
- sdev->rds_radio_text = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
- V4L2_CID_RDS_TX_RADIO_TEXT, 0, MAX_RDS_RADIO_TEXT, 32, 0);
-
- sdev->limiter_enabled = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
- V4L2_CID_AUDIO_LIMITER_ENABLED, 0, 1, 1, 1);
- sdev->limiter_release_time = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
- V4L2_CID_AUDIO_LIMITER_RELEASE_TIME, 250,
- MAX_LIMITER_RELEASE_TIME, 10, DEFAULT_LIMITER_RTIME);
- sdev->limiter_deviation = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
- V4L2_CID_AUDIO_LIMITER_DEVIATION, 0,
- MAX_LIMITER_DEVIATION, 10, DEFAULT_LIMITER_DEV);
-
- sdev->compression_enabled = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
- V4L2_CID_AUDIO_COMPRESSION_ENABLED, 0, 1, 1, 1);
- sdev->compression_gain = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
- V4L2_CID_AUDIO_COMPRESSION_GAIN, 0, MAX_ACOMP_GAIN, 1,
- DEFAULT_ACOMP_GAIN);
- sdev->compression_threshold = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
- V4L2_CID_AUDIO_COMPRESSION_THRESHOLD, MIN_ACOMP_THRESHOLD,
- MAX_ACOMP_THRESHOLD, 1,
- DEFAULT_ACOMP_THRESHOLD);
- sdev->compression_attack_time = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
- V4L2_CID_AUDIO_COMPRESSION_ATTACK_TIME, 0,
- MAX_ACOMP_ATTACK_TIME, 500, DEFAULT_ACOMP_ATIME);
- sdev->compression_release_time = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
- V4L2_CID_AUDIO_COMPRESSION_RELEASE_TIME, 100000,
- MAX_ACOMP_RELEASE_TIME, 100000, DEFAULT_ACOMP_RTIME);
-
- sdev->pilot_tone_enabled = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
- V4L2_CID_PILOT_TONE_ENABLED, 0, 1, 1, 1);
- sdev->pilot_tone_deviation = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
- V4L2_CID_PILOT_TONE_DEVIATION, 0, MAX_PILOT_DEVIATION,
- 10, DEFAULT_PILOT_DEVIATION);
- sdev->pilot_tone_freq = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
- V4L2_CID_PILOT_TONE_FREQUENCY, 0, MAX_PILOT_FREQUENCY,
- 1, DEFAULT_PILOT_FREQUENCY);
-
- sdev->tune_preemphasis = v4l2_ctrl_new_std_menu(hdl, &si4713_ctrl_ops,
- V4L2_CID_TUNE_PREEMPHASIS,
- V4L2_PREEMPHASIS_75_uS, 0, V4L2_PREEMPHASIS_50_uS);
- sdev->tune_pwr_level = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
- V4L2_CID_TUNE_POWER_LEVEL, 0, 120, 1, DEFAULT_POWER_LEVEL);
- sdev->tune_ant_cap = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
- V4L2_CID_TUNE_ANTENNA_CAPACITOR, 0, 191, 1, 0);
-
- if (hdl->error) {
- rval = hdl->error;
- goto free_ctrls;
- }
- v4l2_ctrl_cluster(20, &sdev->mute);
- sdev->sd.ctrl_handler = hdl;
-
- if (client->irq) {
- rval = request_irq(client->irq,
- si4713_handler, IRQF_TRIGGER_FALLING | IRQF_DISABLED,
- client->name, sdev);
- if (rval < 0) {
- v4l2_err(&sdev->sd, "Could not request IRQ\n");
- goto put_reg;
- }
- v4l2_dbg(1, debug, &sdev->sd, "IRQ requested.\n");
- } else {
- v4l2_warn(&sdev->sd, "IRQ not configured. Using timeouts.\n");
- }
-
- rval = si4713_initialize(sdev);
- if (rval < 0) {
- v4l2_err(&sdev->sd, "Failed to probe device information.\n");
- goto free_irq;
- }
-
- return 0;
-
-free_irq:
- if (client->irq)
- free_irq(client->irq, sdev);
-free_ctrls:
- v4l2_ctrl_handler_free(hdl);
-put_reg:
- regulator_bulk_free(ARRAY_SIZE(sdev->supplies), sdev->supplies);
-free_gpio:
- if (gpio_is_valid(sdev->gpio_reset))
- gpio_free(sdev->gpio_reset);
-free_sdev:
- kfree(sdev);
-exit:
- return rval;
-}
-
-/* si4713_remove - remove the device */
-static int si4713_remove(struct i2c_client *client)
-{
- struct v4l2_subdev *sd = i2c_get_clientdata(client);
- struct si4713_device *sdev = to_si4713_device(sd);
-
- if (sdev->power_state)
- si4713_set_power_state(sdev, POWER_DOWN);
-
- if (client->irq > 0)
- free_irq(client->irq, sdev);
-
- v4l2_device_unregister_subdev(sd);
- v4l2_ctrl_handler_free(sd->ctrl_handler);
- regulator_bulk_free(ARRAY_SIZE(sdev->supplies), sdev->supplies);
- if (gpio_is_valid(sdev->gpio_reset))
- gpio_free(sdev->gpio_reset);
- kfree(sdev);
-
- return 0;
-}
-
-/* si4713_i2c_driver - i2c driver interface */
-static const struct i2c_device_id si4713_id[] = {
- { "si4713" , 0 },
- { },
-};
-MODULE_DEVICE_TABLE(i2c, si4713_id);
-
-static struct i2c_driver si4713_i2c_driver = {
- .driver = {
- .name = "si4713",
- },
- .probe = si4713_probe,
- .remove = si4713_remove,
- .id_table = si4713_id,
-};
-
-module_i2c_driver(si4713_i2c_driver);
diff --git a/drivers/media/radio/si4713-i2c.h b/drivers/media/radio/si4713-i2c.h
deleted file mode 100644
index 25cdea2..0000000
--- a/drivers/media/radio/si4713-i2c.h
+++ /dev/null
@@ -1,238 +0,0 @@
-/*
- * drivers/media/radio/si4713-i2c.h
- *
- * Property and commands definitions for Si4713 radio transmitter chip.
- *
- * Copyright (c) 2008 Instituto Nokia de Tecnologia - INdT
- * Contact: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- *
- */
-
-#ifndef SI4713_I2C_H
-#define SI4713_I2C_H
-
-#include <media/v4l2-subdev.h>
-#include <media/v4l2-ctrls.h>
-#include <media/si4713.h>
-
-#define SI4713_PRODUCT_NUMBER 0x0D
-
-/* Command Timeouts */
-#define DEFAULT_TIMEOUT 500
-#define TIMEOUT_SET_PROPERTY 20
-#define TIMEOUT_TX_TUNE_POWER 30000
-#define TIMEOUT_TX_TUNE 110000
-#define TIMEOUT_POWER_UP 200000
-
-/*
- * Command and its arguments definitions
- */
-#define SI4713_PWUP_CTSIEN (1<<7)
-#define SI4713_PWUP_GPO2OEN (1<<6)
-#define SI4713_PWUP_PATCH (1<<5)
-#define SI4713_PWUP_XOSCEN (1<<4)
-#define SI4713_PWUP_FUNC_TX 0x02
-#define SI4713_PWUP_FUNC_PATCH 0x0F
-#define SI4713_PWUP_OPMOD_ANALOG 0x50
-#define SI4713_PWUP_OPMOD_DIGITAL 0x0F
-#define SI4713_PWUP_NARGS 2
-#define SI4713_PWUP_NRESP 1
-#define SI4713_CMD_POWER_UP 0x01
-
-#define SI4713_GETREV_NRESP 9
-#define SI4713_CMD_GET_REV 0x10
-
-#define SI4713_PWDN_NRESP 1
-#define SI4713_CMD_POWER_DOWN 0x11
-
-#define SI4713_SET_PROP_NARGS 5
-#define SI4713_SET_PROP_NRESP 1
-#define SI4713_CMD_SET_PROPERTY 0x12
-
-#define SI4713_GET_PROP_NARGS 3
-#define SI4713_GET_PROP_NRESP 4
-#define SI4713_CMD_GET_PROPERTY 0x13
-
-#define SI4713_GET_STATUS_NRESP 1
-#define SI4713_CMD_GET_INT_STATUS 0x14
-
-#define SI4713_CMD_PATCH_ARGS 0x15
-#define SI4713_CMD_PATCH_DATA 0x16
-
-#define SI4713_MAX_FREQ 10800
-#define SI4713_MIN_FREQ 7600
-#define SI4713_TXFREQ_NARGS 3
-#define SI4713_TXFREQ_NRESP 1
-#define SI4713_CMD_TX_TUNE_FREQ 0x30
-
-#define SI4713_MAX_POWER 120
-#define SI4713_MIN_POWER 88
-#define SI4713_MAX_ANTCAP 191
-#define SI4713_MIN_ANTCAP 0
-#define SI4713_TXPWR_NARGS 4
-#define SI4713_TXPWR_NRESP 1
-#define SI4713_CMD_TX_TUNE_POWER 0x31
-
-#define SI4713_TXMEA_NARGS 4
-#define SI4713_TXMEA_NRESP 1
-#define SI4713_CMD_TX_TUNE_MEASURE 0x32
-
-#define SI4713_INTACK_MASK 0x01
-#define SI4713_TXSTATUS_NARGS 1
-#define SI4713_TXSTATUS_NRESP 8
-#define SI4713_CMD_TX_TUNE_STATUS 0x33
-
-#define SI4713_OVERMOD_BIT (1 << 2)
-#define SI4713_IALH_BIT (1 << 1)
-#define SI4713_IALL_BIT (1 << 0)
-#define SI4713_ASQSTATUS_NARGS 1
-#define SI4713_ASQSTATUS_NRESP 5
-#define SI4713_CMD_TX_ASQ_STATUS 0x34
-
-#define SI4713_RDSBUFF_MODE_MASK 0x87
-#define SI4713_RDSBUFF_NARGS 7
-#define SI4713_RDSBUFF_NRESP 6
-#define SI4713_CMD_TX_RDS_BUFF 0x35
-
-#define SI4713_RDSPS_PSID_MASK 0x1F
-#define SI4713_RDSPS_NARGS 5
-#define SI4713_RDSPS_NRESP 1
-#define SI4713_CMD_TX_RDS_PS 0x36
-
-#define SI4713_CMD_GPO_CTL 0x80
-#define SI4713_CMD_GPO_SET 0x81
-
-/*
- * Bits from status response
- */
-#define SI4713_CTS (1<<7)
-#define SI4713_ERR (1<<6)
-#define SI4713_RDS_INT (1<<2)
-#define SI4713_ASQ_INT (1<<1)
-#define SI4713_STC_INT (1<<0)
-
-/*
- * Property definitions
- */
-#define SI4713_GPO_IEN 0x0001
-#define SI4713_DIG_INPUT_FORMAT 0x0101
-#define SI4713_DIG_INPUT_SAMPLE_RATE 0x0103
-#define SI4713_REFCLK_FREQ 0x0201
-#define SI4713_REFCLK_PRESCALE 0x0202
-#define SI4713_TX_COMPONENT_ENABLE 0x2100
-#define SI4713_TX_AUDIO_DEVIATION 0x2101
-#define SI4713_TX_PILOT_DEVIATION 0x2102
-#define SI4713_TX_RDS_DEVIATION 0x2103
-#define SI4713_TX_LINE_INPUT_LEVEL 0x2104
-#define SI4713_TX_LINE_INPUT_MUTE 0x2105
-#define SI4713_TX_PREEMPHASIS 0x2106
-#define SI4713_TX_PILOT_FREQUENCY 0x2107
-#define SI4713_TX_ACOMP_ENABLE 0x2200
-#define SI4713_TX_ACOMP_THRESHOLD 0x2201
-#define SI4713_TX_ACOMP_ATTACK_TIME 0x2202
-#define SI4713_TX_ACOMP_RELEASE_TIME 0x2203
-#define SI4713_TX_ACOMP_GAIN 0x2204
-#define SI4713_TX_LIMITER_RELEASE_TIME 0x2205
-#define SI4713_TX_ASQ_INTERRUPT_SOURCE 0x2300
-#define SI4713_TX_ASQ_LEVEL_LOW 0x2301
-#define SI4713_TX_ASQ_DURATION_LOW 0x2302
-#define SI4713_TX_ASQ_LEVEL_HIGH 0x2303
-#define SI4713_TX_ASQ_DURATION_HIGH 0x2304
-#define SI4713_TX_RDS_INTERRUPT_SOURCE 0x2C00
-#define SI4713_TX_RDS_PI 0x2C01
-#define SI4713_TX_RDS_PS_MIX 0x2C02
-#define SI4713_TX_RDS_PS_MISC 0x2C03
-#define SI4713_TX_RDS_PS_REPEAT_COUNT 0x2C04
-#define SI4713_TX_RDS_PS_MESSAGE_COUNT 0x2C05
-#define SI4713_TX_RDS_PS_AF 0x2C06
-#define SI4713_TX_RDS_FIFO_SIZE 0x2C07
-
-#define PREEMPHASIS_USA 75
-#define PREEMPHASIS_EU 50
-#define PREEMPHASIS_DISABLED 0
-#define FMPE_USA 0x00
-#define FMPE_EU 0x01
-#define FMPE_DISABLED 0x02
-
-#define POWER_UP 0x01
-#define POWER_DOWN 0x00
-
-#define MAX_RDS_PTY 31
-#define MAX_RDS_DEVIATION 90000
-
-/*
- * PSNAME is known to be defined as 8 character sized (RDS Spec).
- * However, there is receivers which scroll PSNAME 8xN sized.
- */
-#define MAX_RDS_PS_NAME 96
-
-/*
- * MAX_RDS_RADIO_TEXT is known to be defined as 32 (2A group) or 64 (2B group)
- * character sized (RDS Spec).
- * However, there is receivers which scroll them as well.
- */
-#define MAX_RDS_RADIO_TEXT 384
-
-#define MAX_LIMITER_RELEASE_TIME 102390
-#define MAX_LIMITER_DEVIATION 90000
-
-#define MAX_PILOT_DEVIATION 90000
-#define MAX_PILOT_FREQUENCY 19000
-
-#define MAX_ACOMP_RELEASE_TIME 1000000
-#define MAX_ACOMP_ATTACK_TIME 5000
-#define MAX_ACOMP_THRESHOLD 0
-#define MIN_ACOMP_THRESHOLD (-40)
-#define MAX_ACOMP_GAIN 20
-
-#define SI4713_NUM_SUPPLIES 2
-
-/*
- * si4713_device - private data
- */
-struct si4713_device {
- /* v4l2_subdev and i2c reference (v4l2_subdev priv data) */
- struct v4l2_subdev sd;
- struct v4l2_ctrl_handler ctrl_handler;
- /* private data structures */
- struct { /* si4713 control cluster */
- /* This is one big cluster since the mute control
- * powers off the device and after unmuting again all
- * controls need to be set at once. The only way of doing
- * that is by making it one big cluster. */
- struct v4l2_ctrl *mute;
- struct v4l2_ctrl *rds_ps_name;
- struct v4l2_ctrl *rds_radio_text;
- struct v4l2_ctrl *rds_pi;
- struct v4l2_ctrl *rds_deviation;
- struct v4l2_ctrl *rds_pty;
- struct v4l2_ctrl *compression_enabled;
- struct v4l2_ctrl *compression_threshold;
- struct v4l2_ctrl *compression_gain;
- struct v4l2_ctrl *compression_attack_time;
- struct v4l2_ctrl *compression_release_time;
- struct v4l2_ctrl *pilot_tone_enabled;
- struct v4l2_ctrl *pilot_tone_freq;
- struct v4l2_ctrl *pilot_tone_deviation;
- struct v4l2_ctrl *limiter_enabled;
- struct v4l2_ctrl *limiter_deviation;
- struct v4l2_ctrl *limiter_release_time;
- struct v4l2_ctrl *tune_preemphasis;
- struct v4l2_ctrl *tune_pwr_level;
- struct v4l2_ctrl *tune_ant_cap;
- };
- struct completion work;
- struct regulator_bulk_data supplies[SI4713_NUM_SUPPLIES];
- int gpio_reset;
- u32 power_state;
- u32 rds_enabled;
- u32 frequency;
- u32 preemphasis;
- u32 stereo;
- u32 tune_rnl;
-};
-#endif /* ifndef SI4713_I2C_H */
diff --git a/drivers/media/radio/si4713/Kconfig b/drivers/media/radio/si4713/Kconfig
new file mode 100644
index 0000000..f8ac328
--- /dev/null
+++ b/drivers/media/radio/si4713/Kconfig
@@ -0,0 +1,25 @@
+config PLATFORM_SI4713
+ tristate "Silicon Labs Si4713 FM Radio Transmitter support with I2C"
+ depends on I2C && RADIO_SI4713
+ select SI4713
+ ---help---
+ This is a driver for I2C devices with the Silicon Labs SI4713
+ chip.
+
+ Say Y here if you want to connect this type of radio to your
+ computer's I2C port.
+
+ To compile this driver as a module, choose M here: the
+ module will be called radio-platform-si4713.
+
+config I2C_SI4713
+ tristate "Silicon Labs Si4713 FM Radio Transmitter support"
+ depends on I2C && RADIO_SI4713
+ ---help---
+ Say Y here if you want support to Si4713 FM Radio Transmitter.
+ This device can transmit audio through FM. It can transmit
+ RDS and RBDS signals as well. This module is the v4l2 radio
+ interface for the i2c driver of this device.
+
+ To compile this driver as a module, choose M here: the
+ module will be called si4713.
diff --git a/drivers/media/radio/si4713/Makefile b/drivers/media/radio/si4713/Makefile
new file mode 100644
index 0000000..9d0bd0e
--- /dev/null
+++ b/drivers/media/radio/si4713/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for radios with Silicon Labs Si4713 FM Radio Transmitters
+#
+
+obj-$(CONFIG_I2C_SI4713) += si4713.o
+obj-$(CONFIG_PLATFORM_SI4713) += radio-platform-si4713.o
+
diff --git a/drivers/media/radio/si4713/radio-platform-si4713.c b/drivers/media/radio/si4713/radio-platform-si4713.c
new file mode 100644
index 0000000..cf0aad4
--- /dev/null
+++ b/drivers/media/radio/si4713/radio-platform-si4713.c
@@ -0,0 +1,246 @@
+/*
+ * drivers/media/radio/radio-platform-si4713.c
+ *
+ * Platform Driver for Silicon Labs Si4713 FM Radio Transmitter:
+ *
+ * Copyright (c) 2008 Instituto Nokia de Tecnologia - INdT
+ * Contact: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/videodev2.h>
+#include <linux/slab.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-fh.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-event.h>
+#include <media/radio-si4713.h>
+
+/* module parameters */
+static int radio_nr = -1; /* radio device minor (-1 ==> auto assign) */
+module_param(radio_nr, int, 0);
+MODULE_PARM_DESC(radio_nr,
+ "Minor number for radio device (-1 ==> auto assign)");
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Eduardo Valentin <eduardo.valentin@xxxxxxxxx>");
+MODULE_DESCRIPTION("Platform driver for Si4713 FM Radio Transmitter");
+MODULE_VERSION("0.0.1");
+MODULE_ALIAS("platform:radio-si4713");
+
+/* Driver state struct */
+struct radio_si4713_device {
+ struct v4l2_device v4l2_dev;
+ struct video_device radio_dev;
+ struct mutex lock;
+};
+
+/* radio_si4713_fops - file operations interface */
+static const struct v4l2_file_operations radio_si4713_fops = {
+ .owner = THIS_MODULE,
+ .open = v4l2_fh_open,
+ .release = v4l2_fh_release,
+ .poll = v4l2_ctrl_poll,
+ /* Note: locking is done at the subdev level in the i2c driver. */
+ .unlocked_ioctl = video_ioctl2,
+};
+
+/* Video4Linux Interface */
+
+/* radio_si4713_querycap - query device capabilities */
+static int radio_si4713_querycap(struct file *file, void *priv,
+ struct v4l2_capability *capability)
+{
+ strlcpy(capability->driver, "radio-si4713", sizeof(capability->driver));
+ strlcpy(capability->card, "Silicon Labs Si4713 Modulator",
+ sizeof(capability->card));
+ strlcpy(capability->bus_info, "platform:radio-si4713",
+ sizeof(capability->bus_info));
+ capability->device_caps = V4L2_CAP_MODULATOR | V4L2_CAP_RDS_OUTPUT;
+ capability->capabilities = capability->device_caps | V4L2_CAP_DEVICE_CAPS;
+
+ return 0;
+}
+
+/*
+ * v4l2 ioctl call backs.
+ * we are just a wrapper for v4l2_sub_devs.
+ */
+static inline struct v4l2_device *get_v4l2_dev(struct file *file)
+{
+ return &((struct radio_si4713_device *)video_drvdata(file))->v4l2_dev;
+}
+
+static int radio_si4713_g_modulator(struct file *file, void *p,
+ struct v4l2_modulator *vm)
+{
+ return v4l2_device_call_until_err(get_v4l2_dev(file), 0, tuner,
+ g_modulator, vm);
+}
+
+static int radio_si4713_s_modulator(struct file *file, void *p,
+ const struct v4l2_modulator *vm)
+{
+ return v4l2_device_call_until_err(get_v4l2_dev(file), 0, tuner,
+ s_modulator, vm);
+}
+
+static int radio_si4713_g_frequency(struct file *file, void *p,
+ struct v4l2_frequency *vf)
+{
+ return v4l2_device_call_until_err(get_v4l2_dev(file), 0, tuner,
+ g_frequency, vf);
+}
+
+static int radio_si4713_s_frequency(struct file *file, void *p,
+ const struct v4l2_frequency *vf)
+{
+ return v4l2_device_call_until_err(get_v4l2_dev(file), 0, tuner,
+ s_frequency, vf);
+}
+
+static long radio_si4713_default(struct file *file, void *p,
+ bool valid_prio, unsigned int cmd, void *arg)
+{
+ return v4l2_device_call_until_err(get_v4l2_dev(file), 0, core,
+ ioctl, cmd, arg);
+}
+
+static struct v4l2_ioctl_ops radio_si4713_ioctl_ops = {
+ .vidioc_querycap = radio_si4713_querycap,
+ .vidioc_g_modulator = radio_si4713_g_modulator,
+ .vidioc_s_modulator = radio_si4713_s_modulator,
+ .vidioc_g_frequency = radio_si4713_g_frequency,
+ .vidioc_s_frequency = radio_si4713_s_frequency,
+ .vidioc_log_status = v4l2_ctrl_log_status,
+ .vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
+ .vidioc_unsubscribe_event = v4l2_event_unsubscribe,
+ .vidioc_default = radio_si4713_default,
+};
+
+/* radio_si4713_vdev_template - video device interface */
+static struct video_device radio_si4713_vdev_template = {
+ .fops = &radio_si4713_fops,
+ .name = "radio-si4713",
+ .release = video_device_release_empty,
+ .ioctl_ops = &radio_si4713_ioctl_ops,
+ .vfl_dir = VFL_DIR_TX,
+};
+
+/* Platform driver interface */
+/* radio_si4713_pdriver_probe - probe for the device */
+static int radio_si4713_pdriver_probe(struct platform_device *pdev)
+{
+ struct radio_si4713_platform_data *pdata = pdev->dev.platform_data;
+ struct radio_si4713_device *rsdev;
+ struct i2c_adapter *adapter;
+ struct v4l2_subdev *sd;
+ int rval = 0;
+
+ if (!pdata) {
+ dev_err(&pdev->dev, "Cannot proceed without platform data.\n");
+ rval = -EINVAL;
+ goto exit;
+ }
+
+ rsdev = devm_kzalloc(&pdev->dev, sizeof(*rsdev), GFP_KERNEL);
+ if (!rsdev) {
+ dev_err(&pdev->dev, "Failed to alloc video device.\n");
+ rval = -ENOMEM;
+ goto exit;
+ }
+ mutex_init(&rsdev->lock);
+
+ rval = v4l2_device_register(&pdev->dev, &rsdev->v4l2_dev);
+ if (rval) {
+ dev_err(&pdev->dev, "Failed to register v4l2 device.\n");
+ goto exit;
+ }
+
+ adapter = i2c_get_adapter(pdata->i2c_bus);
+ if (!adapter) {
+ dev_err(&pdev->dev, "Cannot get i2c adapter %d\n",
+ pdata->i2c_bus);
+ rval = -ENODEV;
+ goto unregister_v4l2_dev;
+ }
+
+ sd = v4l2_i2c_new_subdev_board(&rsdev->v4l2_dev, adapter,
+ pdata->subdev_board_info, NULL);
+ if (!sd) {
+ dev_err(&pdev->dev, "Cannot get v4l2 subdevice\n");
+ rval = -ENODEV;
+ goto put_adapter;
+ }
+
+ rsdev->radio_dev = radio_si4713_vdev_template;
+ rsdev->radio_dev.v4l2_dev = &rsdev->v4l2_dev;
+ rsdev->radio_dev.ctrl_handler = sd->ctrl_handler;
+ set_bit(V4L2_FL_USE_FH_PRIO, &rsdev->radio_dev.flags);
+ /* Serialize all access to the si4713 */
+ rsdev->radio_dev.lock = &rsdev->lock;
+ video_set_drvdata(&rsdev->radio_dev, rsdev);
+ if (video_register_device(&rsdev->radio_dev, VFL_TYPE_RADIO, radio_nr)) {
+ dev_err(&pdev->dev, "Could not register video device.\n");
+ rval = -EIO;
+ goto put_adapter;
+ }
+ dev_info(&pdev->dev, "New device successfully probed\n");
+
+ goto exit;
+
+put_adapter:
+ i2c_put_adapter(adapter);
+unregister_v4l2_dev:
+ v4l2_device_unregister(&rsdev->v4l2_dev);
+exit:
+ return rval;
+}
+
+/* radio_si4713_pdriver_remove - remove the device */
+static int radio_si4713_pdriver_remove(struct platform_device *pdev)
+{
+ struct v4l2_device *v4l2_dev = platform_get_drvdata(pdev);
+ struct v4l2_subdev *sd = list_entry(v4l2_dev->subdevs.next,
+ struct v4l2_subdev, list);
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct radio_si4713_device *rsdev;
+
+ rsdev = container_of(v4l2_dev, struct radio_si4713_device, v4l2_dev);
+ video_unregister_device(&rsdev->radio_dev);
+ i2c_put_adapter(client->adapter);
+ v4l2_device_unregister(&rsdev->v4l2_dev);
+
+ return 0;
+}
+
+static struct platform_driver radio_si4713_pdriver = {
+ .driver = {
+ .name = "radio-si4713",
+ .owner = THIS_MODULE,
+ },
+ .probe = radio_si4713_pdriver_probe,
+ .remove = radio_si4713_pdriver_remove,
+};
+
+module_platform_driver(radio_si4713_pdriver);
diff --git a/drivers/media/radio/si4713/si4713.c b/drivers/media/radio/si4713/si4713.c
new file mode 100644
index 0000000..ac727e3
--- /dev/null
+++ b/drivers/media/radio/si4713/si4713.c
@@ -0,0 +1,1532 @@
+/*
+ * drivers/media/radio/si4713.c
+ *
+ * Silicon Labs Si4713 FM Radio Transmitter I2C commands.
+ *
+ * Copyright (c) 2009 Nokia Corporation
+ * Contact: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/gpio.h>
+#include <linux/regulator/consumer.h>
+#include <linux/module.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-common.h>
+
+#include "si4713.h"
+
+/* module parameters */
+static int debug;
+module_param(debug, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug level (0 - 2)");
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Eduardo Valentin <eduardo.valentin@xxxxxxxxx>");
+MODULE_DESCRIPTION("I2C driver for Si4713 FM Radio Transmitter");
+MODULE_VERSION("0.0.1");
+
+static const char *si4713_supply_names[SI4713_NUM_SUPPLIES] = {
+ "vio",
+ "vdd",
+};
+
+#define DEFAULT_RDS_PI 0x00
+#define DEFAULT_RDS_PTY 0x00
+#define DEFAULT_RDS_DEVIATION 0x00C8
+#define DEFAULT_RDS_PS_REPEAT_COUNT 0x0003
+#define DEFAULT_LIMITER_RTIME 0x1392
+#define DEFAULT_LIMITER_DEV 0x102CA
+#define DEFAULT_PILOT_FREQUENCY 0x4A38
+#define DEFAULT_PILOT_DEVIATION 0x1A5E
+#define DEFAULT_ACOMP_ATIME 0x0000
+#define DEFAULT_ACOMP_RTIME 0xF4240L
+#define DEFAULT_ACOMP_GAIN 0x0F
+#define DEFAULT_ACOMP_THRESHOLD (-0x28)
+#define DEFAULT_MUTE 0x01
+#define DEFAULT_POWER_LEVEL 88
+#define DEFAULT_FREQUENCY 8800
+#define DEFAULT_PREEMPHASIS FMPE_EU
+#define DEFAULT_TUNE_RNL 0xFF
+
+#define to_si4713_device(sd) container_of(sd, struct si4713_device, sd)
+
+/* frequency domain transformation (using times 10 to avoid floats) */
+#define FREQDEV_UNIT 100000
+#define FREQV4L2_MULTI 625
+#define si4713_to_v4l2(f) ((f * FREQDEV_UNIT) / FREQV4L2_MULTI)
+#define v4l2_to_si4713(f) ((f * FREQV4L2_MULTI) / FREQDEV_UNIT)
+#define FREQ_RANGE_LOW 7600
+#define FREQ_RANGE_HIGH 10800
+
+#define MAX_ARGS 7
+
+#define RDS_BLOCK 8
+#define RDS_BLOCK_CLEAR 0x03
+#define RDS_BLOCK_LOAD 0x04
+#define RDS_RADIOTEXT_2A 0x20
+#define RDS_RADIOTEXT_BLK_SIZE 4
+#define RDS_RADIOTEXT_INDEX_MAX 0x0F
+#define RDS_CARRIAGE_RETURN 0x0D
+
+#define rds_ps_nblocks(len) ((len / RDS_BLOCK) + (len % RDS_BLOCK ? 1 : 0))
+
+#define get_status_bit(p, b, m) (((p) & (m)) >> (b))
+#define set_bits(p, v, b, m) (((p) & ~(m)) | ((v) << (b)))
+
+#define ATTACK_TIME_UNIT 500
+
+#define POWER_OFF 0x00
+#define POWER_ON 0x01
+
+#define msb(x) ((u8)((u16) x >> 8))
+#define lsb(x) ((u8)((u16) x & 0x00FF))
+#define compose_u16(msb, lsb) (((u16)msb << 8) | lsb)
+#define check_command_failed(status) (!(status & SI4713_CTS) || \
+ (status & SI4713_ERR))
+/* mute definition */
+#define set_mute(p) ((p & 1) | ((p & 1) << 1));
+
+#ifdef DEBUG
+#define DBG_BUFFER(device, message, buffer, size) \
+ { \
+ int i; \
+ char str[(size)*5]; \
+ for (i = 0; i < size; i++) \
+ sprintf(str + i * 5, " 0x%02x", buffer[i]); \
+ v4l2_dbg(2, debug, device, "%s:%s\n", message, str); \
+ }
+#else
+#define DBG_BUFFER(device, message, buffer, size)
+#endif
+
+/*
+ * Values for limiter release time (sorted by second column)
+ * device release
+ * value time (us)
+ */
+static long limiter_times[] = {
+ 2000, 250,
+ 1000, 500,
+ 510, 1000,
+ 255, 2000,
+ 170, 3000,
+ 127, 4020,
+ 102, 5010,
+ 85, 6020,
+ 73, 7010,
+ 64, 7990,
+ 57, 8970,
+ 51, 10030,
+ 25, 20470,
+ 17, 30110,
+ 13, 39380,
+ 10, 51190,
+ 8, 63690,
+ 7, 73140,
+ 6, 85330,
+ 5, 102390,
+};
+
+/*
+ * Values for audio compression release time (sorted by second column)
+ * device release
+ * value time (us)
+ */
+static unsigned long acomp_rtimes[] = {
+ 0, 100000,
+ 1, 200000,
+ 2, 350000,
+ 3, 525000,
+ 4, 1000000,
+};
+
+/*
+ * Values for preemphasis (sorted by second column)
+ * device preemphasis
+ * value value (v4l2)
+ */
+static unsigned long preemphasis_values[] = {
+ FMPE_DISABLED, V4L2_PREEMPHASIS_DISABLED,
+ FMPE_EU, V4L2_PREEMPHASIS_50_uS,
+ FMPE_USA, V4L2_PREEMPHASIS_75_uS,
+};
+
+static int usecs_to_dev(unsigned long usecs, unsigned long const array[],
+ int size)
+{
+ int i;
+ int rval = -EINVAL;
+
+ for (i = 0; i < size / 2; i++)
+ if (array[(i * 2) + 1] >= usecs) {
+ rval = array[i * 2];
+ break;
+ }
+
+ return rval;
+}
+
+/* si4713_handler: IRQ handler, just complete work */
+static irqreturn_t si4713_handler(int irq, void *dev)
+{
+ struct si4713_device *sdev = dev;
+
+ v4l2_dbg(2, debug, &sdev->sd,
+ "%s: sending signal to completion work.\n", __func__);
+ complete(&sdev->work);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * si4713_send_command - sends a command to si4713 and waits its response
+ * @sdev: si4713_device structure for the device we are communicating
+ * @command: command id
+ * @args: command arguments we are sending (up to 7)
+ * @argn: actual size of @args
+ * @response: buffer to place the expected response from the device (up to 15)
+ * @respn: actual size of @response
+ * @usecs: amount of time to wait before reading the response (in usecs)
+ */
+static int si4713_send_command(struct si4713_device *sdev, const u8 command,
+ const u8 args[], const int argn,
+ u8 response[], const int respn, const int usecs)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&sdev->sd);
+ u8 data1[MAX_ARGS + 1];
+ int err;
+
+ if (!client->adapter)
+ return -ENODEV;
+
+ /* First send the command and its arguments */
+ data1[0] = command;
+ memcpy(data1 + 1, args, argn);
+ DBG_BUFFER(&sdev->sd, "Parameters", data1, argn + 1);
+
+ err = i2c_master_send(client, data1, argn + 1);
+ if (err != argn + 1) {
+ v4l2_err(&sdev->sd, "Error while sending command 0x%02x\n",
+ command);
+ return (err > 0) ? -EIO : err;
+ }
+
+ /* Wait response from interrupt */
+ if (!wait_for_completion_timeout(&sdev->work,
+ usecs_to_jiffies(usecs) + 1))
+ v4l2_warn(&sdev->sd,
+ "(%s) Device took too much time to answer.\n",
+ __func__);
+
+ /* Then get the response */
+ err = i2c_master_recv(client, response, respn);
+ if (err != respn) {
+ v4l2_err(&sdev->sd,
+ "Error while reading response for command 0x%02x\n",
+ command);
+ return (err > 0) ? -EIO : err;
+ }
+
+ DBG_BUFFER(&sdev->sd, "Response", response, respn);
+ if (check_command_failed(response[0]))
+ return -EBUSY;
+
+ return 0;
+}
+
+/*
+ * si4713_read_property - reads a si4713 property
+ * @sdev: si4713_device structure for the device we are communicating
+ * @prop: property identification number
+ * @pv: property value to be returned on success
+ */
+static int si4713_read_property(struct si4713_device *sdev, u16 prop, u32 *pv)
+{
+ int err;
+ u8 val[SI4713_GET_PROP_NRESP];
+ /*
+ * .First byte = 0
+ * .Second byte = property's MSB
+ * .Third byte = property's LSB
+ */
+ const u8 args[SI4713_GET_PROP_NARGS] = {
+ 0x00,
+ msb(prop),
+ lsb(prop),
+ };
+
+ err = si4713_send_command(sdev, SI4713_CMD_GET_PROPERTY,
+ args, ARRAY_SIZE(args), val,
+ ARRAY_SIZE(val), DEFAULT_TIMEOUT);
+
+ if (err < 0)
+ return err;
+
+ *pv = compose_u16(val[2], val[3]);
+
+ v4l2_dbg(1, debug, &sdev->sd,
+ "%s: property=0x%02x value=0x%02x status=0x%02x\n",
+ __func__, prop, *pv, val[0]);
+
+ return err;
+}
+
+/*
+ * si4713_write_property - modifies a si4713 property
+ * @sdev: si4713_device structure for the device we are communicating
+ * @prop: property identification number
+ * @val: new value for that property
+ */
+static int si4713_write_property(struct si4713_device *sdev, u16 prop, u16 val)
+{
+ int rval;
+ u8 resp[SI4713_SET_PROP_NRESP];
+ /*
+ * .First byte = 0
+ * .Second byte = property's MSB
+ * .Third byte = property's LSB
+ * .Fourth byte = value's MSB
+ * .Fifth byte = value's LSB
+ */
+ const u8 args[SI4713_SET_PROP_NARGS] = {
+ 0x00,
+ msb(prop),
+ lsb(prop),
+ msb(val),
+ lsb(val),
+ };
+
+ rval = si4713_send_command(sdev, SI4713_CMD_SET_PROPERTY,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ DEFAULT_TIMEOUT);
+
+ if (rval < 0)
+ return rval;
+
+ v4l2_dbg(1, debug, &sdev->sd,
+ "%s: property=0x%02x value=0x%02x status=0x%02x\n",
+ __func__, prop, val, resp[0]);
+
+ /*
+ * As there is no command response for SET_PROPERTY,
+ * wait Tcomp time to finish before proceed, in order
+ * to have property properly set.
+ */
+ msleep(TIMEOUT_SET_PROPERTY);
+
+ return rval;
+}
+
+/*
+ * si4713_powerup - Powers the device up
+ * @sdev: si4713_device structure for the device we are communicating
+ */
+static int si4713_powerup(struct si4713_device *sdev)
+{
+ int err;
+ u8 resp[SI4713_PWUP_NRESP];
+ /*
+ * .First byte = Enabled interrupts and boot function
+ * .Second byte = Input operation mode
+ */
+ const u8 args[SI4713_PWUP_NARGS] = {
+ SI4713_PWUP_CTSIEN | SI4713_PWUP_GPO2OEN | SI4713_PWUP_FUNC_TX,
+ SI4713_PWUP_OPMOD_ANALOG,
+ };
+
+ if (sdev->power_state)
+ return 0;
+
+ err = regulator_bulk_enable(ARRAY_SIZE(sdev->supplies),
+ sdev->supplies);
+ if (err) {
+ v4l2_err(&sdev->sd, "Failed to enable supplies: %d\n", err);
+ return err;
+ }
+ if (gpio_is_valid(sdev->gpio_reset)) {
+ udelay(50);
+ gpio_set_value(sdev->gpio_reset, 1);
+ }
+
+ err = si4713_send_command(sdev, SI4713_CMD_POWER_UP,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ TIMEOUT_POWER_UP);
+
+ if (!err) {
+ v4l2_dbg(1, debug, &sdev->sd, "Powerup response: 0x%02x\n",
+ resp[0]);
+ v4l2_dbg(1, debug, &sdev->sd, "Device in power up mode\n");
+ sdev->power_state = POWER_ON;
+
+ err = si4713_write_property(sdev, SI4713_GPO_IEN,
+ SI4713_STC_INT | SI4713_CTS);
+ } else {
+ if (gpio_is_valid(sdev->gpio_reset))
+ gpio_set_value(sdev->gpio_reset, 0);
+ err = regulator_bulk_disable(ARRAY_SIZE(sdev->supplies),
+ sdev->supplies);
+ if (err)
+ v4l2_err(&sdev->sd,
+ "Failed to disable supplies: %d\n", err);
+ }
+
+ return err;
+}
+
+/*
+ * si4713_powerdown - Powers the device down
+ * @sdev: si4713_device structure for the device we are communicating
+ */
+static int si4713_powerdown(struct si4713_device *sdev)
+{
+ int err;
+ u8 resp[SI4713_PWDN_NRESP];
+
+ if (!sdev->power_state)
+ return 0;
+
+ err = si4713_send_command(sdev, SI4713_CMD_POWER_DOWN,
+ NULL, 0,
+ resp, ARRAY_SIZE(resp),
+ DEFAULT_TIMEOUT);
+
+ if (!err) {
+ v4l2_dbg(1, debug, &sdev->sd, "Power down response: 0x%02x\n",
+ resp[0]);
+ v4l2_dbg(1, debug, &sdev->sd, "Device in reset mode\n");
+ if (gpio_is_valid(sdev->gpio_reset))
+ gpio_set_value(sdev->gpio_reset, 0);
+ err = regulator_bulk_disable(ARRAY_SIZE(sdev->supplies),
+ sdev->supplies);
+ if (err)
+ v4l2_err(&sdev->sd,
+ "Failed to disable supplies: %d\n", err);
+ sdev->power_state = POWER_OFF;
+ }
+
+ return err;
+}
+
+/*
+ * si4713_checkrev - Checks if we are treating a device with the correct rev.
+ * @sdev: si4713_device structure for the device we are communicating
+ */
+static int si4713_checkrev(struct si4713_device *sdev)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&sdev->sd);
+ int rval;
+ u8 resp[SI4713_GETREV_NRESP];
+
+ rval = si4713_send_command(sdev, SI4713_CMD_GET_REV,
+ NULL, 0,
+ resp, ARRAY_SIZE(resp),
+ DEFAULT_TIMEOUT);
+
+ if (rval < 0)
+ return rval;
+
+ if (resp[1] == SI4713_PRODUCT_NUMBER) {
+ v4l2_info(&sdev->sd, "chip found @ 0x%02x (%s)\n",
+ client->addr << 1, client->adapter->name);
+ } else {
+ v4l2_err(&sdev->sd, "Invalid product number\n");
+ rval = -EINVAL;
+ }
+ return rval;
+}
+
+/*
+ * si4713_wait_stc - Waits STC interrupt and clears status bits. Useful
+ * for TX_TUNE_POWER, TX_TUNE_FREQ and TX_TUNE_MEAS
+ * @sdev: si4713_device structure for the device we are communicating
+ * @usecs: timeout to wait for STC interrupt signal
+ */
+static int si4713_wait_stc(struct si4713_device *sdev, const int usecs)
+{
+ int err;
+ u8 resp[SI4713_GET_STATUS_NRESP];
+
+ /* Wait response from STC interrupt */
+ if (!wait_for_completion_timeout(&sdev->work,
+ usecs_to_jiffies(usecs) + 1))
+ v4l2_warn(&sdev->sd,
+ "%s: device took too much time to answer (%d usec).\n",
+ __func__, usecs);
+
+ /* Clear status bits */
+ err = si4713_send_command(sdev, SI4713_CMD_GET_INT_STATUS,
+ NULL, 0,
+ resp, ARRAY_SIZE(resp),
+ DEFAULT_TIMEOUT);
+
+ if (err < 0)
+ goto exit;
+
+ v4l2_dbg(1, debug, &sdev->sd,
+ "%s: status bits: 0x%02x\n", __func__, resp[0]);
+
+ if (!(resp[0] & SI4713_STC_INT))
+ err = -EIO;
+
+exit:
+ return err;
+}
+
+/*
+ * si4713_tx_tune_freq - Sets the state of the RF carrier and sets the tuning
+ * frequency between 76 and 108 MHz in 10 kHz units and
+ * steps of 50 kHz.
+ * @sdev: si4713_device structure for the device we are communicating
+ * @frequency: desired frequency (76 - 108 MHz, unit 10 KHz, step 50 kHz)
+ */
+static int si4713_tx_tune_freq(struct si4713_device *sdev, u16 frequency)
+{
+ int err;
+ u8 val[SI4713_TXFREQ_NRESP];
+ /*
+ * .First byte = 0
+ * .Second byte = frequency's MSB
+ * .Third byte = frequency's LSB
+ */
+ const u8 args[SI4713_TXFREQ_NARGS] = {
+ 0x00,
+ msb(frequency),
+ lsb(frequency),
+ };
+
+ err = si4713_send_command(sdev, SI4713_CMD_TX_TUNE_FREQ,
+ args, ARRAY_SIZE(args), val,
+ ARRAY_SIZE(val), DEFAULT_TIMEOUT);
+
+ if (err < 0)
+ return err;
+
+ v4l2_dbg(1, debug, &sdev->sd,
+ "%s: frequency=0x%02x status=0x%02x\n", __func__,
+ frequency, val[0]);
+
+ err = si4713_wait_stc(sdev, TIMEOUT_TX_TUNE);
+ if (err < 0)
+ return err;
+
+ return compose_u16(args[1], args[2]);
+}
+
+/*
+ * si4713_tx_tune_power - Sets the RF voltage level between 88 and 115 dBuV in
+ * 1 dB units. A value of 0x00 indicates off. The command
+ * also sets the antenna tuning capacitance. A value of 0
+ * indicates autotuning, and a value of 1 - 191 indicates
+ * a manual override, which results in a tuning
+ * capacitance of 0.25 pF x @antcap.
+ * @sdev: si4713_device structure for the device we are communicating
+ * @power: tuning power (88 - 115 dBuV, unit/step 1 dB)
+ * @antcap: value of antenna tuning capacitor (0 - 191)
+ */
+static int si4713_tx_tune_power(struct si4713_device *sdev, u8 power,
+ u8 antcap)
+{
+ int err;
+ u8 val[SI4713_TXPWR_NRESP];
+ /*
+ * .First byte = 0
+ * .Second byte = 0
+ * .Third byte = power
+ * .Fourth byte = antcap
+ */
+ const u8 args[SI4713_TXPWR_NARGS] = {
+ 0x00,
+ 0x00,
+ power,
+ antcap,
+ };
+
+ if (((power > 0) && (power < SI4713_MIN_POWER)) ||
+ power > SI4713_MAX_POWER || antcap > SI4713_MAX_ANTCAP)
+ return -EDOM;
+
+ err = si4713_send_command(sdev, SI4713_CMD_TX_TUNE_POWER,
+ args, ARRAY_SIZE(args), val,
+ ARRAY_SIZE(val), DEFAULT_TIMEOUT);
+
+ if (err < 0)
+ return err;
+
+ v4l2_dbg(1, debug, &sdev->sd,
+ "%s: power=0x%02x antcap=0x%02x status=0x%02x\n",
+ __func__, power, antcap, val[0]);
+
+ return si4713_wait_stc(sdev, TIMEOUT_TX_TUNE_POWER);
+}
+
+/*
+ * si4713_tx_tune_measure - Enters receive mode and measures the received noise
+ * level in units of dBuV on the selected frequency.
+ * The Frequency must be between 76 and 108 MHz in 10 kHz
+ * units and steps of 50 kHz. The command also sets the
+ * antenna tuning capacitance. A value of 0 means
+ * autotuning, and a value of 1 to 191 indicates manual
+ * override.
+ * @sdev: si4713_device structure for the device we are communicating
+ * @frequency: desired frequency (76 - 108 MHz, unit 10 KHz, step 50 kHz)
+ * @antcap: value of antenna tuning capacitor (0 - 191)
+ */
+static int si4713_tx_tune_measure(struct si4713_device *sdev, u16 frequency,
+ u8 antcap)
+{
+ int err;
+ u8 val[SI4713_TXMEA_NRESP];
+ /*
+ * .First byte = 0
+ * .Second byte = frequency's MSB
+ * .Third byte = frequency's LSB
+ * .Fourth byte = antcap
+ */
+ const u8 args[SI4713_TXMEA_NARGS] = {
+ 0x00,
+ msb(frequency),
+ lsb(frequency),
+ antcap,
+ };
+
+ sdev->tune_rnl = DEFAULT_TUNE_RNL;
+
+ if (antcap > SI4713_MAX_ANTCAP)
+ return -EDOM;
+
+ err = si4713_send_command(sdev, SI4713_CMD_TX_TUNE_MEASURE,
+ args, ARRAY_SIZE(args), val,
+ ARRAY_SIZE(val), DEFAULT_TIMEOUT);
+
+ if (err < 0)
+ return err;
+
+ v4l2_dbg(1, debug, &sdev->sd,
+ "%s: frequency=0x%02x antcap=0x%02x status=0x%02x\n",
+ __func__, frequency, antcap, val[0]);
+
+ return si4713_wait_stc(sdev, TIMEOUT_TX_TUNE);
+}
+
+/*
+ * si4713_tx_tune_status- Returns the status of the tx_tune_freq, tx_tune_mea or
+ * tx_tune_power commands. This command return the current
+ * frequency, output voltage in dBuV, the antenna tunning
+ * capacitance value and the received noise level. The
+ * command also clears the stcint interrupt bit when the
+ * first bit of its arguments is high.
+ * @sdev: si4713_device structure for the device we are communicating
+ * @intack: 0x01 to clear the seek/tune complete interrupt status indicator.
+ * @frequency: returned frequency
+ * @power: returned power
+ * @antcap: returned antenna capacitance
+ * @noise: returned noise level
+ */
+static int si4713_tx_tune_status(struct si4713_device *sdev, u8 intack,
+ u16 *frequency, u8 *power,
+ u8 *antcap, u8 *noise)
+{
+ int err;
+ u8 val[SI4713_TXSTATUS_NRESP];
+ /*
+ * .First byte = intack bit
+ */
+ const u8 args[SI4713_TXSTATUS_NARGS] = {
+ intack & SI4713_INTACK_MASK,
+ };
+
+ err = si4713_send_command(sdev, SI4713_CMD_TX_TUNE_STATUS,
+ args, ARRAY_SIZE(args), val,
+ ARRAY_SIZE(val), DEFAULT_TIMEOUT);
+
+ if (!err) {
+ v4l2_dbg(1, debug, &sdev->sd,
+ "%s: status=0x%02x\n", __func__, val[0]);
+ *frequency = compose_u16(val[2], val[3]);
+ sdev->frequency = *frequency;
+ *power = val[5];
+ *antcap = val[6];
+ *noise = val[7];
+ v4l2_dbg(1, debug, &sdev->sd, "%s: response: %d x 10 kHz "
+ "(power %d, antcap %d, rnl %d)\n", __func__,
+ *frequency, *power, *antcap, *noise);
+ }
+
+ return err;
+}
+
+/*
+ * si4713_tx_rds_buff - Loads the RDS group buffer FIFO or circular buffer.
+ * @sdev: si4713_device structure for the device we are communicating
+ * @mode: the buffer operation mode.
+ * @rdsb: RDS Block B
+ * @rdsc: RDS Block C
+ * @rdsd: RDS Block D
+ * @cbleft: returns the number of available circular buffer blocks minus the
+ * number of used circular buffer blocks.
+ */
+static int si4713_tx_rds_buff(struct si4713_device *sdev, u8 mode, u16 rdsb,
+ u16 rdsc, u16 rdsd, s8 *cbleft)
+{
+ int err;
+ u8 val[SI4713_RDSBUFF_NRESP];
+
+ const u8 args[SI4713_RDSBUFF_NARGS] = {
+ mode & SI4713_RDSBUFF_MODE_MASK,
+ msb(rdsb),
+ lsb(rdsb),
+ msb(rdsc),
+ lsb(rdsc),
+ msb(rdsd),
+ lsb(rdsd),
+ };
+
+ err = si4713_send_command(sdev, SI4713_CMD_TX_RDS_BUFF,
+ args, ARRAY_SIZE(args), val,
+ ARRAY_SIZE(val), DEFAULT_TIMEOUT);
+
+ if (!err) {
+ v4l2_dbg(1, debug, &sdev->sd,
+ "%s: status=0x%02x\n", __func__, val[0]);
+ *cbleft = (s8)val[2] - val[3];
+ v4l2_dbg(1, debug, &sdev->sd, "%s: response: interrupts"
+ " 0x%02x cb avail: %d cb used %d fifo avail"
+ " %d fifo used %d\n", __func__, val[1],
+ val[2], val[3], val[4], val[5]);
+ }
+
+ return err;
+}
+
+/*
+ * si4713_tx_rds_ps - Loads the program service buffer.
+ * @sdev: si4713_device structure for the device we are communicating
+ * @psid: program service id to be loaded.
+ * @pschar: assumed 4 size char array to be loaded into the program service
+ */
+static int si4713_tx_rds_ps(struct si4713_device *sdev, u8 psid,
+ unsigned char *pschar)
+{
+ int err;
+ u8 val[SI4713_RDSPS_NRESP];
+
+ const u8 args[SI4713_RDSPS_NARGS] = {
+ psid & SI4713_RDSPS_PSID_MASK,
+ pschar[0],
+ pschar[1],
+ pschar[2],
+ pschar[3],
+ };
+
+ err = si4713_send_command(sdev, SI4713_CMD_TX_RDS_PS,
+ args, ARRAY_SIZE(args), val,
+ ARRAY_SIZE(val), DEFAULT_TIMEOUT);
+
+ if (err < 0)
+ return err;
+
+ v4l2_dbg(1, debug, &sdev->sd, "%s: status=0x%02x\n", __func__, val[0]);
+
+ return err;
+}
+
+static int si4713_set_power_state(struct si4713_device *sdev, u8 value)
+{
+ if (value)
+ return si4713_powerup(sdev);
+ return si4713_powerdown(sdev);
+}
+
+static int si4713_set_mute(struct si4713_device *sdev, u16 mute)
+{
+ int rval = 0;
+
+ mute = set_mute(mute);
+
+ if (sdev->power_state)
+ rval = si4713_write_property(sdev,
+ SI4713_TX_LINE_INPUT_MUTE, mute);
+
+ return rval;
+}
+
+static int si4713_set_rds_ps_name(struct si4713_device *sdev, char *ps_name)
+{
+ int rval = 0, i;
+ u8 len = 0;
+
+ /* We want to clear the whole thing */
+ if (!strlen(ps_name))
+ memset(ps_name, 0, MAX_RDS_PS_NAME + 1);
+
+ if (sdev->power_state) {
+ /* Write the new ps name and clear the padding */
+ for (i = 0; i < MAX_RDS_PS_NAME; i += (RDS_BLOCK / 2)) {
+ rval = si4713_tx_rds_ps(sdev, (i / (RDS_BLOCK / 2)),
+ ps_name + i);
+ if (rval < 0)
+ return rval;
+ }
+
+ /* Setup the size to be sent */
+ if (strlen(ps_name))
+ len = strlen(ps_name) - 1;
+ else
+ len = 1;
+
+ rval = si4713_write_property(sdev,
+ SI4713_TX_RDS_PS_MESSAGE_COUNT,
+ rds_ps_nblocks(len));
+ if (rval < 0)
+ return rval;
+
+ rval = si4713_write_property(sdev,
+ SI4713_TX_RDS_PS_REPEAT_COUNT,
+ DEFAULT_RDS_PS_REPEAT_COUNT * 2);
+ if (rval < 0)
+ return rval;
+ }
+
+ return rval;
+}
+
+static int si4713_set_rds_radio_text(struct si4713_device *sdev, char *rt)
+{
+ int rval = 0, i;
+ u16 t_index = 0;
+ u8 b_index = 0, cr_inserted = 0;
+ s8 left;
+
+ if (!sdev->power_state)
+ return rval;
+
+ rval = si4713_tx_rds_buff(sdev, RDS_BLOCK_CLEAR, 0, 0, 0, &left);
+ if (rval < 0)
+ return rval;
+
+ if (!strlen(rt))
+ return rval;
+
+ do {
+ /* RDS spec says that if the last block isn't used,
+ * then apply a carriage return
+ */
+ if (t_index < (RDS_RADIOTEXT_INDEX_MAX * RDS_RADIOTEXT_BLK_SIZE)) {
+ for (i = 0; i < RDS_RADIOTEXT_BLK_SIZE; i++) {
+ if (!rt[t_index + i] ||
+ rt[t_index + i] == RDS_CARRIAGE_RETURN) {
+ rt[t_index + i] = RDS_CARRIAGE_RETURN;
+ cr_inserted = 1;
+ break;
+ }
+ }
+ }
+
+ rval = si4713_tx_rds_buff(sdev, RDS_BLOCK_LOAD,
+ compose_u16(RDS_RADIOTEXT_2A, b_index++),
+ compose_u16(rt[t_index], rt[t_index + 1]),
+ compose_u16(rt[t_index + 2], rt[t_index + 3]),
+ &left);
+ if (rval < 0)
+ return rval;
+
+ t_index += RDS_RADIOTEXT_BLK_SIZE;
+
+ if (cr_inserted)
+ break;
+ } while (left > 0);
+
+ return rval;
+}
+
+/*
+ * si4713_update_tune_status - update properties from tx_tune_status
+ * command. Must be called with sdev->mutex held.
+ * @sdev: si4713_device structure for the device we are communicating
+ */
+static int si4713_update_tune_status(struct si4713_device *sdev)
+{
+ int rval;
+ u16 f = 0;
+ u8 p = 0, a = 0, n = 0;
+
+ rval = si4713_tx_tune_status(sdev, 0x00, &f, &p, &a, &n);
+
+ if (rval < 0)
+ goto exit;
+
+/* TODO: check that power_level and antenna_capacitor really are not
+ changed by the hardware. If they are, then these controls should become
+ volatiles.
+ sdev->power_level = p;
+ sdev->antenna_capacitor = a;*/
+ sdev->tune_rnl = n;
+
+exit:
+ return rval;
+}
+
+static int si4713_choose_econtrol_action(struct si4713_device *sdev, u32 id,
+ s32 *bit, s32 *mask, u16 *property, int *mul,
+ unsigned long **table, int *size)
+{
+ s32 rval = 0;
+
+ switch (id) {
+ /* FM_TX class controls */
+ case V4L2_CID_RDS_TX_PI:
+ *property = SI4713_TX_RDS_PI;
+ *mul = 1;
+ break;
+ case V4L2_CID_AUDIO_COMPRESSION_THRESHOLD:
+ *property = SI4713_TX_ACOMP_THRESHOLD;
+ *mul = 1;
+ break;
+ case V4L2_CID_AUDIO_COMPRESSION_GAIN:
+ *property = SI4713_TX_ACOMP_GAIN;
+ *mul = 1;
+ break;
+ case V4L2_CID_PILOT_TONE_FREQUENCY:
+ *property = SI4713_TX_PILOT_FREQUENCY;
+ *mul = 1;
+ break;
+ case V4L2_CID_AUDIO_COMPRESSION_ATTACK_TIME:
+ *property = SI4713_TX_ACOMP_ATTACK_TIME;
+ *mul = ATTACK_TIME_UNIT;
+ break;
+ case V4L2_CID_PILOT_TONE_DEVIATION:
+ *property = SI4713_TX_PILOT_DEVIATION;
+ *mul = 10;
+ break;
+ case V4L2_CID_AUDIO_LIMITER_DEVIATION:
+ *property = SI4713_TX_AUDIO_DEVIATION;
+ *mul = 10;
+ break;
+ case V4L2_CID_RDS_TX_DEVIATION:
+ *property = SI4713_TX_RDS_DEVIATION;
+ *mul = 1;
+ break;
+
+ case V4L2_CID_RDS_TX_PTY:
+ *property = SI4713_TX_RDS_PS_MISC;
+ *bit = 5;
+ *mask = 0x1F << 5;
+ break;
+ case V4L2_CID_AUDIO_LIMITER_ENABLED:
+ *property = SI4713_TX_ACOMP_ENABLE;
+ *bit = 1;
+ *mask = 1 << 1;
+ break;
+ case V4L2_CID_AUDIO_COMPRESSION_ENABLED:
+ *property = SI4713_TX_ACOMP_ENABLE;
+ *bit = 0;
+ *mask = 1 << 0;
+ break;
+ case V4L2_CID_PILOT_TONE_ENABLED:
+ *property = SI4713_TX_COMPONENT_ENABLE;
+ *bit = 0;
+ *mask = 1 << 0;
+ break;
+
+ case V4L2_CID_AUDIO_LIMITER_RELEASE_TIME:
+ *property = SI4713_TX_LIMITER_RELEASE_TIME;
+ *table = limiter_times;
+ *size = ARRAY_SIZE(limiter_times);
+ break;
+ case V4L2_CID_AUDIO_COMPRESSION_RELEASE_TIME:
+ *property = SI4713_TX_ACOMP_RELEASE_TIME;
+ *table = acomp_rtimes;
+ *size = ARRAY_SIZE(acomp_rtimes);
+ break;
+ case V4L2_CID_TUNE_PREEMPHASIS:
+ *property = SI4713_TX_PREEMPHASIS;
+ *table = preemphasis_values;
+ *size = ARRAY_SIZE(preemphasis_values);
+ break;
+
+ default:
+ rval = -EINVAL;
+ break;
+ }
+
+ return rval;
+}
+
+static int si4713_s_frequency(struct v4l2_subdev *sd, const struct v4l2_frequency *f);
+static int si4713_s_modulator(struct v4l2_subdev *sd, const struct v4l2_modulator *);
+/*
+ * si4713_setup - Sets the device up with current configuration.
+ * @sdev: si4713_device structure for the device we are communicating
+ */
+static int si4713_setup(struct si4713_device *sdev)
+{
+ struct v4l2_frequency f;
+ struct v4l2_modulator vm;
+ int rval;
+
+ /* Device procedure needs to set frequency first */
+ f.tuner = 0;
+ f.frequency = sdev->frequency ? sdev->frequency : DEFAULT_FREQUENCY;
+ f.frequency = si4713_to_v4l2(f.frequency);
+ rval = si4713_s_frequency(&sdev->sd, &f);
+
+ vm.index = 0;
+ if (sdev->stereo)
+ vm.txsubchans = V4L2_TUNER_SUB_STEREO;
+ else
+ vm.txsubchans = V4L2_TUNER_SUB_MONO;
+ if (sdev->rds_enabled)
+ vm.txsubchans |= V4L2_TUNER_SUB_RDS;
+ si4713_s_modulator(&sdev->sd, &vm);
+
+ return rval;
+}
+
+/*
+ * si4713_initialize - Sets the device up with default configuration.
+ * @sdev: si4713_device structure for the device we are communicating
+ */
+static int si4713_initialize(struct si4713_device *sdev)
+{
+ int rval;
+
+ rval = si4713_set_power_state(sdev, POWER_ON);
+ if (rval < 0)
+ return rval;
+
+ rval = si4713_checkrev(sdev);
+ if (rval < 0)
+ return rval;
+
+ rval = si4713_set_power_state(sdev, POWER_OFF);
+ if (rval < 0)
+ return rval;
+
+
+ sdev->frequency = DEFAULT_FREQUENCY;
+ sdev->stereo = 1;
+ sdev->tune_rnl = DEFAULT_TUNE_RNL;
+ return 0;
+}
+
+/* si4713_s_ctrl - set the value of a control */
+static int si4713_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+ struct si4713_device *sdev =
+ container_of(ctrl->handler, struct si4713_device, ctrl_handler);
+ u32 val = 0;
+ s32 bit = 0, mask = 0;
+ u16 property = 0;
+ int mul = 0;
+ unsigned long *table = NULL;
+ int size = 0;
+ bool force = false;
+ int c;
+ int ret = 0;
+
+ if (ctrl->id != V4L2_CID_AUDIO_MUTE)
+ return -EINVAL;
+ if (ctrl->is_new) {
+ if (ctrl->val) {
+ ret = si4713_set_mute(sdev, ctrl->val);
+ if (!ret)
+ ret = si4713_set_power_state(sdev, POWER_DOWN);
+ return ret;
+ }
+ ret = si4713_set_power_state(sdev, POWER_UP);
+ if (!ret)
+ ret = si4713_set_mute(sdev, ctrl->val);
+ if (!ret)
+ ret = si4713_setup(sdev);
+ if (ret)
+ return ret;
+ force = true;
+ }
+
+ if (!sdev->power_state)
+ return 0;
+
+ for (c = 1; !ret && c < ctrl->ncontrols; c++) {
+ ctrl = ctrl->cluster[c];
+
+ if (!force && !ctrl->is_new)
+ continue;
+
+ switch (ctrl->id) {
+ case V4L2_CID_RDS_TX_PS_NAME:
+ ret = si4713_set_rds_ps_name(sdev, ctrl->string);
+ break;
+
+ case V4L2_CID_RDS_TX_RADIO_TEXT:
+ ret = si4713_set_rds_radio_text(sdev, ctrl->string);
+ break;
+
+ case V4L2_CID_TUNE_ANTENNA_CAPACITOR:
+ /* don't handle this control if we force setting all
+ * controls since in that case it will be handled by
+ * V4L2_CID_TUNE_POWER_LEVEL. */
+ if (force)
+ break;
+ /* fall through */
+ case V4L2_CID_TUNE_POWER_LEVEL:
+ ret = si4713_tx_tune_power(sdev,
+ sdev->tune_pwr_level->val, sdev->tune_ant_cap->val);
+ if (!ret) {
+ /* Make sure we don't set this twice */
+ sdev->tune_ant_cap->is_new = false;
+ sdev->tune_pwr_level->is_new = false;
+ }
+ break;
+
+ default:
+ ret = si4713_choose_econtrol_action(sdev, ctrl->id, &bit,
+ &mask, &property, &mul, &table, &size);
+ if (ret < 0)
+ break;
+
+ val = ctrl->val;
+ if (mul) {
+ val = val / mul;
+ } else if (table) {
+ ret = usecs_to_dev(val, table, size);
+ if (ret < 0)
+ break;
+ val = ret;
+ ret = 0;
+ }
+
+ if (mask) {
+ ret = si4713_read_property(sdev, property, &val);
+ if (ret < 0)
+ break;
+ val = set_bits(val, ctrl->val, bit, mask);
+ }
+
+ ret = si4713_write_property(sdev, property, val);
+ if (ret < 0)
+ break;
+ if (mask)
+ val = ctrl->val;
+ break;
+ }
+ }
+
+ return ret;
+}
+
+/* si4713_ioctl - deal with private ioctls (only rnl for now) */
+static long si4713_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
+{
+ struct si4713_device *sdev = to_si4713_device(sd);
+ struct si4713_rnl *rnl = arg;
+ u16 frequency;
+ int rval = 0;
+
+ if (!arg)
+ return -EINVAL;
+
+ switch (cmd) {
+ case SI4713_IOC_MEASURE_RNL:
+ frequency = v4l2_to_si4713(rnl->frequency);
+
+ if (sdev->power_state) {
+ /* Set desired measurement frequency */
+ rval = si4713_tx_tune_measure(sdev, frequency, 0);
+ if (rval < 0)
+ return rval;
+ /* get results from tune status */
+ rval = si4713_update_tune_status(sdev);
+ if (rval < 0)
+ return rval;
+ }
+ rnl->rnl = sdev->tune_rnl;
+ break;
+
+ default:
+ /* nothing */
+ rval = -ENOIOCTLCMD;
+ }
+
+ return rval;
+}
+
+/* si4713_g_modulator - get modulator attributes */
+static int si4713_g_modulator(struct v4l2_subdev *sd, struct v4l2_modulator *vm)
+{
+ struct si4713_device *sdev = to_si4713_device(sd);
+ int rval = 0;
+
+ if (!sdev)
+ return -ENODEV;
+
+ if (vm->index > 0)
+ return -EINVAL;
+
+ strncpy(vm->name, "FM Modulator", 32);
+ vm->capability = V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LOW |
+ V4L2_TUNER_CAP_RDS | V4L2_TUNER_CAP_RDS_CONTROLS;
+
+ /* Report current frequency range limits */
+ vm->rangelow = si4713_to_v4l2(FREQ_RANGE_LOW);
+ vm->rangehigh = si4713_to_v4l2(FREQ_RANGE_HIGH);
+
+ if (sdev->power_state) {
+ u32 comp_en = 0;
+
+ rval = si4713_read_property(sdev, SI4713_TX_COMPONENT_ENABLE,
+ &comp_en);
+ if (rval < 0)
+ return rval;
+
+ sdev->stereo = get_status_bit(comp_en, 1, 1 << 1);
+ }
+
+ /* Report current audio mode: mono or stereo */
+ if (sdev->stereo)
+ vm->txsubchans = V4L2_TUNER_SUB_STEREO;
+ else
+ vm->txsubchans = V4L2_TUNER_SUB_MONO;
+
+ /* Report rds feature status */
+ if (sdev->rds_enabled)
+ vm->txsubchans |= V4L2_TUNER_SUB_RDS;
+ else
+ vm->txsubchans &= ~V4L2_TUNER_SUB_RDS;
+
+ return rval;
+}
+
+/* si4713_s_modulator - set modulator attributes */
+static int si4713_s_modulator(struct v4l2_subdev *sd, const struct v4l2_modulator *vm)
+{
+ struct si4713_device *sdev = to_si4713_device(sd);
+ int rval = 0;
+ u16 stereo, rds;
+ u32 p;
+
+ if (!sdev)
+ return -ENODEV;
+
+ if (vm->index > 0)
+ return -EINVAL;
+
+ /* Set audio mode: mono or stereo */
+ if (vm->txsubchans & V4L2_TUNER_SUB_STEREO)
+ stereo = 1;
+ else if (vm->txsubchans & V4L2_TUNER_SUB_MONO)
+ stereo = 0;
+ else
+ return -EINVAL;
+
+ rds = !!(vm->txsubchans & V4L2_TUNER_SUB_RDS);
+
+ if (sdev->power_state) {
+ rval = si4713_read_property(sdev,
+ SI4713_TX_COMPONENT_ENABLE, &p);
+ if (rval < 0)
+ return rval;
+
+ p = set_bits(p, stereo, 1, 1 << 1);
+ p = set_bits(p, rds, 2, 1 << 2);
+
+ rval = si4713_write_property(sdev,
+ SI4713_TX_COMPONENT_ENABLE, p);
+ if (rval < 0)
+ return rval;
+ }
+
+ sdev->stereo = stereo;
+ sdev->rds_enabled = rds;
+
+ return rval;
+}
+
+/* si4713_g_frequency - get tuner or modulator radio frequency */
+static int si4713_g_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *f)
+{
+ struct si4713_device *sdev = to_si4713_device(sd);
+ int rval = 0;
+
+ if (f->tuner)
+ return -EINVAL;
+
+ if (sdev->power_state) {
+ u16 freq;
+ u8 p, a, n;
+
+ rval = si4713_tx_tune_status(sdev, 0x00, &freq, &p, &a, &n);
+ if (rval < 0)
+ return rval;
+
+ sdev->frequency = freq;
+ }
+
+ f->frequency = si4713_to_v4l2(sdev->frequency);
+
+ return rval;
+}
+
+/* si4713_s_frequency - set tuner or modulator radio frequency */
+static int si4713_s_frequency(struct v4l2_subdev *sd, const struct v4l2_frequency *f)
+{
+ struct si4713_device *sdev = to_si4713_device(sd);
+ int rval = 0;
+ u16 frequency = v4l2_to_si4713(f->frequency);
+
+ if (f->tuner)
+ return -EINVAL;
+
+ /* Check frequency range */
+ frequency = clamp_t(u16, frequency, FREQ_RANGE_LOW, FREQ_RANGE_HIGH);
+
+ if (sdev->power_state) {
+ rval = si4713_tx_tune_freq(sdev, frequency);
+ if (rval < 0)
+ return rval;
+ frequency = rval;
+ rval = 0;
+ }
+ sdev->frequency = frequency;
+
+ return rval;
+}
+
+static const struct v4l2_ctrl_ops si4713_ctrl_ops = {
+ .s_ctrl = si4713_s_ctrl,
+};
+
+static const struct v4l2_subdev_core_ops si4713_subdev_core_ops = {
+ .ioctl = si4713_ioctl,
+};
+
+static const struct v4l2_subdev_tuner_ops si4713_subdev_tuner_ops = {
+ .g_frequency = si4713_g_frequency,
+ .s_frequency = si4713_s_frequency,
+ .g_modulator = si4713_g_modulator,
+ .s_modulator = si4713_s_modulator,
+};
+
+static const struct v4l2_subdev_ops si4713_subdev_ops = {
+ .core = &si4713_subdev_core_ops,
+ .tuner = &si4713_subdev_tuner_ops,
+};
+
+/*
+ * I2C driver interface
+ */
+/* si4713_probe - probe for the device */
+static int si4713_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct si4713_device *sdev;
+ struct si4713_platform_data *pdata = client->dev.platform_data;
+ struct v4l2_ctrl_handler *hdl;
+ int rval, i;
+
+ sdev = kzalloc(sizeof *sdev, GFP_KERNEL);
+ if (!sdev) {
+ dev_err(&client->dev, "Failed to alloc video device.\n");
+ rval = -ENOMEM;
+ goto exit;
+ }
+
+ sdev->gpio_reset = -1;
+ if (pdata && gpio_is_valid(pdata->gpio_reset)) {
+ rval = gpio_request(pdata->gpio_reset, "si4713 reset");
+ if (rval) {
+ dev_err(&client->dev,
+ "Failed to request gpio: %d\n", rval);
+ goto free_sdev;
+ }
+ sdev->gpio_reset = pdata->gpio_reset;
+ gpio_direction_output(sdev->gpio_reset, 0);
+ }
+
+ for (i = 0; i < ARRAY_SIZE(sdev->supplies); i++)
+ sdev->supplies[i].supply = si4713_supply_names[i];
+
+ rval = regulator_bulk_get(&client->dev, ARRAY_SIZE(sdev->supplies),
+ sdev->supplies);
+ if (rval) {
+ dev_err(&client->dev, "Cannot get regulators: %d\n", rval);
+ goto free_gpio;
+ }
+
+ v4l2_i2c_subdev_init(&sdev->sd, client, &si4713_subdev_ops);
+
+ init_completion(&sdev->work);
+
+ hdl = &sdev->ctrl_handler;
+ v4l2_ctrl_handler_init(hdl, 20);
+ sdev->mute = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+ V4L2_CID_AUDIO_MUTE, 0, 1, 1, DEFAULT_MUTE);
+
+ sdev->rds_pi = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+ V4L2_CID_RDS_TX_PI, 0, 0xffff, 1, DEFAULT_RDS_PI);
+ sdev->rds_pty = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+ V4L2_CID_RDS_TX_PTY, 0, 31, 1, DEFAULT_RDS_PTY);
+ sdev->rds_deviation = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+ V4L2_CID_RDS_TX_DEVIATION, 0, MAX_RDS_DEVIATION,
+ 10, DEFAULT_RDS_DEVIATION);
+ /*
+ * Report step as 8. From RDS spec, psname
+ * should be 8. But there are receivers which scroll strings
+ * sized as 8xN.
+ */
+ sdev->rds_ps_name = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+ V4L2_CID_RDS_TX_PS_NAME, 0, MAX_RDS_PS_NAME, 8, 0);
+ /*
+ * Report step as 32 (2A block). From RDS spec,
+ * radio text should be 32 for 2A block. But there are receivers
+ * which scroll strings sized as 32xN. Setting default to 32.
+ */
+ sdev->rds_radio_text = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+ V4L2_CID_RDS_TX_RADIO_TEXT, 0, MAX_RDS_RADIO_TEXT, 32, 0);
+
+ sdev->limiter_enabled = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+ V4L2_CID_AUDIO_LIMITER_ENABLED, 0, 1, 1, 1);
+ sdev->limiter_release_time = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+ V4L2_CID_AUDIO_LIMITER_RELEASE_TIME, 250,
+ MAX_LIMITER_RELEASE_TIME, 10, DEFAULT_LIMITER_RTIME);
+ sdev->limiter_deviation = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+ V4L2_CID_AUDIO_LIMITER_DEVIATION, 0,
+ MAX_LIMITER_DEVIATION, 10, DEFAULT_LIMITER_DEV);
+
+ sdev->compression_enabled = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+ V4L2_CID_AUDIO_COMPRESSION_ENABLED, 0, 1, 1, 1);
+ sdev->compression_gain = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+ V4L2_CID_AUDIO_COMPRESSION_GAIN, 0, MAX_ACOMP_GAIN, 1,
+ DEFAULT_ACOMP_GAIN);
+ sdev->compression_threshold = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+ V4L2_CID_AUDIO_COMPRESSION_THRESHOLD, MIN_ACOMP_THRESHOLD,
+ MAX_ACOMP_THRESHOLD, 1,
+ DEFAULT_ACOMP_THRESHOLD);
+ sdev->compression_attack_time = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+ V4L2_CID_AUDIO_COMPRESSION_ATTACK_TIME, 0,
+ MAX_ACOMP_ATTACK_TIME, 500, DEFAULT_ACOMP_ATIME);
+ sdev->compression_release_time = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+ V4L2_CID_AUDIO_COMPRESSION_RELEASE_TIME, 100000,
+ MAX_ACOMP_RELEASE_TIME, 100000, DEFAULT_ACOMP_RTIME);
+
+ sdev->pilot_tone_enabled = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+ V4L2_CID_PILOT_TONE_ENABLED, 0, 1, 1, 1);
+ sdev->pilot_tone_deviation = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+ V4L2_CID_PILOT_TONE_DEVIATION, 0, MAX_PILOT_DEVIATION,
+ 10, DEFAULT_PILOT_DEVIATION);
+ sdev->pilot_tone_freq = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+ V4L2_CID_PILOT_TONE_FREQUENCY, 0, MAX_PILOT_FREQUENCY,
+ 1, DEFAULT_PILOT_FREQUENCY);
+
+ sdev->tune_preemphasis = v4l2_ctrl_new_std_menu(hdl, &si4713_ctrl_ops,
+ V4L2_CID_TUNE_PREEMPHASIS,
+ V4L2_PREEMPHASIS_75_uS, 0, V4L2_PREEMPHASIS_50_uS);
+ sdev->tune_pwr_level = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+ V4L2_CID_TUNE_POWER_LEVEL, 0, 120, 1, DEFAULT_POWER_LEVEL);
+ sdev->tune_ant_cap = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+ V4L2_CID_TUNE_ANTENNA_CAPACITOR, 0, 191, 1, 0);
+
+ if (hdl->error) {
+ rval = hdl->error;
+ goto free_ctrls;
+ }
+ v4l2_ctrl_cluster(20, &sdev->mute);
+ sdev->sd.ctrl_handler = hdl;
+
+ if (client->irq) {
+ rval = request_irq(client->irq,
+ si4713_handler, IRQF_TRIGGER_FALLING | IRQF_DISABLED,
+ client->name, sdev);
+ if (rval < 0) {
+ v4l2_err(&sdev->sd, "Could not request IRQ\n");
+ goto put_reg;
+ }
+ v4l2_dbg(1, debug, &sdev->sd, "IRQ requested.\n");
+ } else {
+ v4l2_warn(&sdev->sd, "IRQ not configured. Using timeouts.\n");
+ }
+
+ rval = si4713_initialize(sdev);
+ if (rval < 0) {
+ v4l2_err(&sdev->sd, "Failed to probe device information.\n");
+ goto free_irq;
+ }
+
+ return 0;
+
+free_irq:
+ if (client->irq)
+ free_irq(client->irq, sdev);
+free_ctrls:
+ v4l2_ctrl_handler_free(hdl);
+put_reg:
+ regulator_bulk_free(ARRAY_SIZE(sdev->supplies), sdev->supplies);
+free_gpio:
+ if (gpio_is_valid(sdev->gpio_reset))
+ gpio_free(sdev->gpio_reset);
+free_sdev:
+ kfree(sdev);
+exit:
+ return rval;
+}
+
+/* si4713_remove - remove the device */
+static int si4713_remove(struct i2c_client *client)
+{
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct si4713_device *sdev = to_si4713_device(sd);
+
+ if (sdev->power_state)
+ si4713_set_power_state(sdev, POWER_DOWN);
+
+ if (client->irq > 0)
+ free_irq(client->irq, sdev);
+
+ v4l2_device_unregister_subdev(sd);
+ v4l2_ctrl_handler_free(sd->ctrl_handler);
+ regulator_bulk_free(ARRAY_SIZE(sdev->supplies), sdev->supplies);
+ if (gpio_is_valid(sdev->gpio_reset))
+ gpio_free(sdev->gpio_reset);
+ kfree(sdev);
+
+ return 0;
+}
+
+/* si4713_i2c_driver - i2c driver interface */
+static const struct i2c_device_id si4713_id[] = {
+ { "si4713" , 0 },
+ { },
+};
+MODULE_DEVICE_TABLE(i2c, si4713_id);
+
+static struct i2c_driver si4713_i2c_driver = {
+ .driver = {
+ .name = "si4713",
+ },
+ .probe = si4713_probe,
+ .remove = si4713_remove,
+ .id_table = si4713_id,
+};
+
+module_i2c_driver(si4713_i2c_driver);
diff --git a/drivers/media/radio/si4713/si4713.h b/drivers/media/radio/si4713/si4713.h
new file mode 100644
index 0000000..c274e1f
--- /dev/null
+++ b/drivers/media/radio/si4713/si4713.h
@@ -0,0 +1,238 @@
+/*
+ * drivers/media/radio/si4713.h
+ *
+ * Property and commands definitions for Si4713 radio transmitter chip.
+ *
+ * Copyright (c) 2008 Instituto Nokia de Tecnologia - INdT
+ * Contact: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ *
+ */
+
+#ifndef SI4713_I2C_H
+#define SI4713_I2C_H
+
+#include <media/v4l2-subdev.h>
+#include <media/v4l2-ctrls.h>
+#include <media/si4713.h>
+
+#define SI4713_PRODUCT_NUMBER 0x0D
+
+/* Command Timeouts */
+#define DEFAULT_TIMEOUT 500
+#define TIMEOUT_SET_PROPERTY 20
+#define TIMEOUT_TX_TUNE_POWER 30000
+#define TIMEOUT_TX_TUNE 110000
+#define TIMEOUT_POWER_UP 200000
+
+/*
+ * Command and its arguments definitions
+ */
+#define SI4713_PWUP_CTSIEN (1<<7)
+#define SI4713_PWUP_GPO2OEN (1<<6)
+#define SI4713_PWUP_PATCH (1<<5)
+#define SI4713_PWUP_XOSCEN (1<<4)
+#define SI4713_PWUP_FUNC_TX 0x02
+#define SI4713_PWUP_FUNC_PATCH 0x0F
+#define SI4713_PWUP_OPMOD_ANALOG 0x50
+#define SI4713_PWUP_OPMOD_DIGITAL 0x0F
+#define SI4713_PWUP_NARGS 2
+#define SI4713_PWUP_NRESP 1
+#define SI4713_CMD_POWER_UP 0x01
+
+#define SI4713_GETREV_NRESP 9
+#define SI4713_CMD_GET_REV 0x10
+
+#define SI4713_PWDN_NRESP 1
+#define SI4713_CMD_POWER_DOWN 0x11
+
+#define SI4713_SET_PROP_NARGS 5
+#define SI4713_SET_PROP_NRESP 1
+#define SI4713_CMD_SET_PROPERTY 0x12
+
+#define SI4713_GET_PROP_NARGS 3
+#define SI4713_GET_PROP_NRESP 4
+#define SI4713_CMD_GET_PROPERTY 0x13
+
+#define SI4713_GET_STATUS_NRESP 1
+#define SI4713_CMD_GET_INT_STATUS 0x14
+
+#define SI4713_CMD_PATCH_ARGS 0x15
+#define SI4713_CMD_PATCH_DATA 0x16
+
+#define SI4713_MAX_FREQ 10800
+#define SI4713_MIN_FREQ 7600
+#define SI4713_TXFREQ_NARGS 3
+#define SI4713_TXFREQ_NRESP 1
+#define SI4713_CMD_TX_TUNE_FREQ 0x30
+
+#define SI4713_MAX_POWER 120
+#define SI4713_MIN_POWER 88
+#define SI4713_MAX_ANTCAP 191
+#define SI4713_MIN_ANTCAP 0
+#define SI4713_TXPWR_NARGS 4
+#define SI4713_TXPWR_NRESP 1
+#define SI4713_CMD_TX_TUNE_POWER 0x31
+
+#define SI4713_TXMEA_NARGS 4
+#define SI4713_TXMEA_NRESP 1
+#define SI4713_CMD_TX_TUNE_MEASURE 0x32
+
+#define SI4713_INTACK_MASK 0x01
+#define SI4713_TXSTATUS_NARGS 1
+#define SI4713_TXSTATUS_NRESP 8
+#define SI4713_CMD_TX_TUNE_STATUS 0x33
+
+#define SI4713_OVERMOD_BIT (1 << 2)
+#define SI4713_IALH_BIT (1 << 1)
+#define SI4713_IALL_BIT (1 << 0)
+#define SI4713_ASQSTATUS_NARGS 1
+#define SI4713_ASQSTATUS_NRESP 5
+#define SI4713_CMD_TX_ASQ_STATUS 0x34
+
+#define SI4713_RDSBUFF_MODE_MASK 0x87
+#define SI4713_RDSBUFF_NARGS 7
+#define SI4713_RDSBUFF_NRESP 6
+#define SI4713_CMD_TX_RDS_BUFF 0x35
+
+#define SI4713_RDSPS_PSID_MASK 0x1F
+#define SI4713_RDSPS_NARGS 5
+#define SI4713_RDSPS_NRESP 1
+#define SI4713_CMD_TX_RDS_PS 0x36
+
+#define SI4713_CMD_GPO_CTL 0x80
+#define SI4713_CMD_GPO_SET 0x81
+
+/*
+ * Bits from status response
+ */
+#define SI4713_CTS (1<<7)
+#define SI4713_ERR (1<<6)
+#define SI4713_RDS_INT (1<<2)
+#define SI4713_ASQ_INT (1<<1)
+#define SI4713_STC_INT (1<<0)
+
+/*
+ * Property definitions
+ */
+#define SI4713_GPO_IEN 0x0001
+#define SI4713_DIG_INPUT_FORMAT 0x0101
+#define SI4713_DIG_INPUT_SAMPLE_RATE 0x0103
+#define SI4713_REFCLK_FREQ 0x0201
+#define SI4713_REFCLK_PRESCALE 0x0202
+#define SI4713_TX_COMPONENT_ENABLE 0x2100
+#define SI4713_TX_AUDIO_DEVIATION 0x2101
+#define SI4713_TX_PILOT_DEVIATION 0x2102
+#define SI4713_TX_RDS_DEVIATION 0x2103
+#define SI4713_TX_LINE_INPUT_LEVEL 0x2104
+#define SI4713_TX_LINE_INPUT_MUTE 0x2105
+#define SI4713_TX_PREEMPHASIS 0x2106
+#define SI4713_TX_PILOT_FREQUENCY 0x2107
+#define SI4713_TX_ACOMP_ENABLE 0x2200
+#define SI4713_TX_ACOMP_THRESHOLD 0x2201
+#define SI4713_TX_ACOMP_ATTACK_TIME 0x2202
+#define SI4713_TX_ACOMP_RELEASE_TIME 0x2203
+#define SI4713_TX_ACOMP_GAIN 0x2204
+#define SI4713_TX_LIMITER_RELEASE_TIME 0x2205
+#define SI4713_TX_ASQ_INTERRUPT_SOURCE 0x2300
+#define SI4713_TX_ASQ_LEVEL_LOW 0x2301
+#define SI4713_TX_ASQ_DURATION_LOW 0x2302
+#define SI4713_TX_ASQ_LEVEL_HIGH 0x2303
+#define SI4713_TX_ASQ_DURATION_HIGH 0x2304
+#define SI4713_TX_RDS_INTERRUPT_SOURCE 0x2C00
+#define SI4713_TX_RDS_PI 0x2C01
+#define SI4713_TX_RDS_PS_MIX 0x2C02
+#define SI4713_TX_RDS_PS_MISC 0x2C03
+#define SI4713_TX_RDS_PS_REPEAT_COUNT 0x2C04
+#define SI4713_TX_RDS_PS_MESSAGE_COUNT 0x2C05
+#define SI4713_TX_RDS_PS_AF 0x2C06
+#define SI4713_TX_RDS_FIFO_SIZE 0x2C07
+
+#define PREEMPHASIS_USA 75
+#define PREEMPHASIS_EU 50
+#define PREEMPHASIS_DISABLED 0
+#define FMPE_USA 0x00
+#define FMPE_EU 0x01
+#define FMPE_DISABLED 0x02
+
+#define POWER_UP 0x01
+#define POWER_DOWN 0x00
+
+#define MAX_RDS_PTY 31
+#define MAX_RDS_DEVIATION 90000
+
+/*
+ * PSNAME is known to be defined as 8 character sized (RDS Spec).
+ * However, there is receivers which scroll PSNAME 8xN sized.
+ */
+#define MAX_RDS_PS_NAME 96
+
+/*
+ * MAX_RDS_RADIO_TEXT is known to be defined as 32 (2A group) or 64 (2B group)
+ * character sized (RDS Spec).
+ * However, there is receivers which scroll them as well.
+ */
+#define MAX_RDS_RADIO_TEXT 384
+
+#define MAX_LIMITER_RELEASE_TIME 102390
+#define MAX_LIMITER_DEVIATION 90000
+
+#define MAX_PILOT_DEVIATION 90000
+#define MAX_PILOT_FREQUENCY 19000
+
+#define MAX_ACOMP_RELEASE_TIME 1000000
+#define MAX_ACOMP_ATTACK_TIME 5000
+#define MAX_ACOMP_THRESHOLD 0
+#define MIN_ACOMP_THRESHOLD (-40)
+#define MAX_ACOMP_GAIN 20
+
+#define SI4713_NUM_SUPPLIES 2
+
+/*
+ * si4713_device - private data
+ */
+struct si4713_device {
+ /* v4l2_subdev and i2c reference (v4l2_subdev priv data) */
+ struct v4l2_subdev sd;
+ struct v4l2_ctrl_handler ctrl_handler;
+ /* private data structures */
+ struct { /* si4713 control cluster */
+ /* This is one big cluster since the mute control
+ * powers off the device and after unmuting again all
+ * controls need to be set at once. The only way of doing
+ * that is by making it one big cluster. */
+ struct v4l2_ctrl *mute;
+ struct v4l2_ctrl *rds_ps_name;
+ struct v4l2_ctrl *rds_radio_text;
+ struct v4l2_ctrl *rds_pi;
+ struct v4l2_ctrl *rds_deviation;
+ struct v4l2_ctrl *rds_pty;
+ struct v4l2_ctrl *compression_enabled;
+ struct v4l2_ctrl *compression_threshold;
+ struct v4l2_ctrl *compression_gain;
+ struct v4l2_ctrl *compression_attack_time;
+ struct v4l2_ctrl *compression_release_time;
+ struct v4l2_ctrl *pilot_tone_enabled;
+ struct v4l2_ctrl *pilot_tone_freq;
+ struct v4l2_ctrl *pilot_tone_deviation;
+ struct v4l2_ctrl *limiter_enabled;
+ struct v4l2_ctrl *limiter_deviation;
+ struct v4l2_ctrl *limiter_release_time;
+ struct v4l2_ctrl *tune_preemphasis;
+ struct v4l2_ctrl *tune_pwr_level;
+ struct v4l2_ctrl *tune_ant_cap;
+ };
+ struct completion work;
+ struct regulator_bulk_data supplies[SI4713_NUM_SUPPLIES];
+ int gpio_reset;
+ u32 power_state;
+ u32 rds_enabled;
+ u32 frequency;
+ u32 preemphasis;
+ u32 stereo;
+ u32 tune_rnl;
+};
+#endif /* ifndef SI4713_I2C_H */
--
1.8.4.rc2
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
