I've only tried composite video input. The video/ audio output is good. It has the following input: RCA stereo sound RCA video S-video It has no push button but has a green led which illuminates when the device is in use. On 18. feb. 2013 22:25, Frank Schäfer wrote: > Am 18.02.2013 21:53, schrieb Mr Goldcove: >> "Easy Cap DC-60++" >> Wrongly identified as card 19 "EM2860/SAA711X Reference Design", >> resulting in no audio. >> Works perfectly when using card 64 "Easy Cap Capture DC-60" > Video inputs work fine, right ? > Does this device has any buttons / LEDs ? > > The driver doesn't handle devices with generic IDs very well. > In this case we can conclude from the USB PID that the device has audio > support (which is actually the only difference to board > EM2860_BOARD_SAA711X_REFERENCE_DESIGN). > But I would like to think twice about it, because this kind of changes > has very a high potential to cause regressions for other boards... > > Regards, > Frank > >> **Interim solution** >> load module (before inserting the EasyCap. I'm having trouble if the >> module is loaded/unloaded with different cards...) >> modprobe em28xx card=64 >> or >> add "options em28xx card=64" to /etc/modprobe.d/local.conf >> >> **hw info** >> Bus 002 Device 005: ID eb1a:2861 eMPIA Technology, Inc. >> >> Chips: >> Empia EM2860 P7JY8-011 201023-01AG >> NXP SAA7113H >> RMC ALC653 89G06K1 G909A >> >> **logs** >> [ 5567.367883] em28xx: New device @ 480 Mbps (eb1a:2861, interface 0, >> class 0) >> [ 5567.367985] em28xx #0: chip ID is em2860 >> [ 5567.380645] IR MCE Keyboard/mouse protocol handler initialized >> [ 5567.384202] lirc_dev: IR Remote Control driver registered, major 249 >> [ 5567.385468] IR LIRC bridge handler initialized >> [ 5567.460386] em28xx #0: board has no eeprom >> [ 5567.534612] em28xx #0: found i2c device @ 0x4a [saa7113h] >> [ 5567.568303] em28xx #0: Your board has no unique USB ID. >> [ 5567.568308] em28xx #0: A hint were successfully done, based on i2c >> devicelist hash. >> [ 5567.568312] em28xx #0: This method is not 100% failproof. >> [ 5567.568314] em28xx #0: If the board were missdetected, please email >> this log to: >> [ 5567.568317] em28xx #0: V4L Mailing List >> <linux-media@xxxxxxxxxxxxxxx> >> [ 5567.568321] em28xx #0: Board detected as EM2860/SAA711X Reference Design >> [ 5567.647433] em28xx #0: Identified as EM2860/SAA711X Reference Design >> (card=19) >> [ 5567.647438] em28xx #0: Registering snapshot button... >> [ 5567.647531] input: em28xx snapshot button as >> /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/input/input11 >> [ 5568.019310] saa7115 15-0025: saa7113 found (1f7113d0e100000) @ 0x4a >> (em28xx #0) >> [ 5568.789385] em28xx #0: Config register raw data: 0x10 >> [ 5568.813055] em28xx #0: AC97 vendor ID = 0x414c4761 >> [ 5568.825074] em28xx #0: AC97 features = 0x0000 >> [ 5568.825078] em28xx #0: Unknown AC97 audio processor detected! >> [ 5569.284137] em28xx #0: v4l2 driver version 0.1.3 >> [ 5570.305831] em28xx #0: V4L2 video device registered as video1 >> [ 5570.305835] em28xx #0: V4L2 VBI device registered as vbi0 >> [ 5570.305862] em28xx audio device (eb1a:2861): interface 1, class 1 >> [ 5570.305877] em28xx audio device (eb1a:2861): interface 2, class 1 >> [ 5570.305906] usbcore: registered new interface driver em28xx >> [ 5570.305909] em28xx driver loaded >> [ 5570.392917] usbcore: registered new interface driver snd-usb-audio >> [ 7903.785365] em28xx #0: vidioc_s_fmt_vid_cap queue busy >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-media" in >> the body of a message to majordomo@xxxxxxxxxxxxxxx >> More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
