"Easy Cap DC-60++" Wrongly identified as card 19 "EM2860/SAA711X Reference Design", resulting in no audio. Works perfectly when using card 64 "Easy Cap Capture DC-60" **Interim solution** load module (before inserting the EasyCap. I'm having trouble if the module is loaded/unloaded with different cards...) modprobe em28xx card=64 or add "options em28xx card=64" to /etc/modprobe.d/local.conf **hw info** Bus 002 Device 005: ID eb1a:2861 eMPIA Technology, Inc. Chips: Empia EM2860 P7JY8-011 201023-01AG NXP SAA7113H RMC ALC653 89G06K1 G909A **logs** [ 5567.367883] em28xx: New device @ 480 Mbps (eb1a:2861, interface 0, class 0) [ 5567.367985] em28xx #0: chip ID is em2860 [ 5567.380645] IR MCE Keyboard/mouse protocol handler initialized [ 5567.384202] lirc_dev: IR Remote Control driver registered, major 249 [ 5567.385468] IR LIRC bridge handler initialized [ 5567.460386] em28xx #0: board has no eeprom [ 5567.534612] em28xx #0: found i2c device @ 0x4a [saa7113h] [ 5567.568303] em28xx #0: Your board has no unique USB ID. [ 5567.568308] em28xx #0: A hint were successfully done, based on i2c devicelist hash. [ 5567.568312] em28xx #0: This method is not 100% failproof. [ 5567.568314] em28xx #0: If the board were missdetected, please email this log to: [ 5567.568317] em28xx #0: V4L Mailing List <linux-media@xxxxxxxxxxxxxxx> [ 5567.568321] em28xx #0: Board detected as EM2860/SAA711X Reference Design [ 5567.647433] em28xx #0: Identified as EM2860/SAA711X Reference Design (card=19) [ 5567.647438] em28xx #0: Registering snapshot button... [ 5567.647531] input: em28xx snapshot button as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/input/input11 [ 5568.019310] saa7115 15-0025: saa7113 found (1f7113d0e100000) @ 0x4a (em28xx #0) [ 5568.789385] em28xx #0: Config register raw data: 0x10 [ 5568.813055] em28xx #0: AC97 vendor ID = 0x414c4761 [ 5568.825074] em28xx #0: AC97 features = 0x0000 [ 5568.825078] em28xx #0: Unknown AC97 audio processor detected! [ 5569.284137] em28xx #0: v4l2 driver version 0.1.3 [ 5570.305831] em28xx #0: V4L2 video device registered as video1 [ 5570.305835] em28xx #0: V4L2 VBI device registered as vbi0 [ 5570.305862] em28xx audio device (eb1a:2861): interface 1, class 1 [ 5570.305877] em28xx audio device (eb1a:2861): interface 2, class 1 [ 5570.305906] usbcore: registered new interface driver em28xx [ 5570.305909] em28xx driver loaded [ 5570.392917] usbcore: registered new interface driver snd-usb-audio [ 7903.785365] em28xx #0: vidioc_s_fmt_vid_cap queue busy -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
