On Mon 8 October 2012 23:14:01 Guennadi Liakhovetski wrote: > On Mon, 8 Oct 2012, Laurent Pinchart wrote: > > > On Monday 08 October 2012 14:00:38 Stephen Warren wrote: > > > On 10/02/2012 08:33 AM, Guennadi Liakhovetski wrote: > > > > On Tue, 2 Oct 2012, Rob Herring wrote: > > > >> On 09/27/2012 09:07 AM, Guennadi Liakhovetski wrote: > > > >>> This patch adds a document, describing common V4L2 device tree bindings. > > > >>> > > > >>> diff --git a/Documentation/devicetree/bindings/media/v4l2.txt > > > >>> b/Documentation/devicetree/bindings/media/v4l2.txt>> > > > >> One other comment below: > > > >>> + > > > >>> +General concept > > > >>> +--------------- > > > >>> + > > > >>> +Video pipelines consist of external devices, e.g. camera sensors, > > > >>> controlled +over an I2C, SPI or UART bus, and SoC internal IP blocks, > > > >>> including video DMA +engines and video data processors. > > > >>> + > > > >>> +SoC internal blocks are described by DT nodes, placed similarly to > > > >>> other SoC +blocks. External devices are represented as child nodes of > > > >>> their respective bus +controller nodes, e.g. I2C. > > > >>> + > > > >>> +Data interfaces on all video devices are described by "port" child DT > > > >>> nodes. +Configuration of a port depends on other devices participating > > > >>> in the data +transfer and is described by "link" DT nodes, specified as > > > >>> children of the +"port" nodes: > > > >>> + > > > >>> +/foo { > > > >>> + port@0 { > > > >>> + link@0 { ... }; > > > >>> + link@1 { ... }; > > > >>> + }; > > > >>> + port@1 { ... }; > > > >>> +}; > > > >>> + > > > >>> +If a port can be configured to work with more than one other device on > > > >>> the same +bus, a "link" child DT node must be provided for each of > > > >>> them. If more than one +port is present on a device or more than one > > > >>> link is connected to a port, a +common scheme, using "#address-cells," > > > >>> "#size-cells" and "reg" properties is +used. > > > >>> + > > > >>> +Optional link properties: > > > >>> +- remote: phandle to the other endpoint link DT node. > > > >> > > > >> This name is a little vague. Perhaps "endpoint" would be better. > > > > > > > > "endpoint" can also refer to something local like in USB case. Maybe > > > > rather the description of the "remote" property should be improved? > > > > > > The documentation doesn't show up in all the .dts files that use it; it > > > might be useful to try and make the .dts file as obviously readable as > > > possible. > > > > > > Perhaps "remote-port" or "connected-port" would be sufficiently descriptive. > > > > I like remote-port better than the already proposed remote-link. > > Yes, remote-port sounds better, than remote-link, but might be more > difficult to correlate with the fact, that the phandle value of this > property points to a link DT node, and not to a port. I first thought of remote-port as well, but it is just weird that it points to a link node. I seem to remember that 'link' was called 'pad' initially, but people didn't like that due to possible confusion with other meanings of that word. The problem with the word 'link' is that it doesn't describe a link but just one endpoint of a link. Is it an idea to rename 'link' to 'endpoint' and 'remote' to 'remote-endpoint'? So a port has endpoints, and each endpoint has a remote-endpoint property. Regards, Hans -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html