On Monday 08 October 2012 14:00:38 Stephen Warren wrote: > On 10/02/2012 08:33 AM, Guennadi Liakhovetski wrote: > > On Tue, 2 Oct 2012, Rob Herring wrote: > >> On 09/27/2012 09:07 AM, Guennadi Liakhovetski wrote: > >>> This patch adds a document, describing common V4L2 device tree bindings. > >>> > >>> diff --git a/Documentation/devicetree/bindings/media/v4l2.txt > >>> b/Documentation/devicetree/bindings/media/v4l2.txt>> > >> One other comment below: > >>> + > >>> +General concept > >>> +--------------- > >>> + > >>> +Video pipelines consist of external devices, e.g. camera sensors, > >>> controlled +over an I2C, SPI or UART bus, and SoC internal IP blocks, > >>> including video DMA +engines and video data processors. > >>> + > >>> +SoC internal blocks are described by DT nodes, placed similarly to > >>> other SoC +blocks. External devices are represented as child nodes of > >>> their respective bus +controller nodes, e.g. I2C. > >>> + > >>> +Data interfaces on all video devices are described by "port" child DT > >>> nodes. +Configuration of a port depends on other devices participating > >>> in the data +transfer and is described by "link" DT nodes, specified as > >>> children of the +"port" nodes: > >>> + > >>> +/foo { > >>> + port@0 { > >>> + link@0 { ... }; > >>> + link@1 { ... }; > >>> + }; > >>> + port@1 { ... }; > >>> +}; > >>> + > >>> +If a port can be configured to work with more than one other device on > >>> the same +bus, a "link" child DT node must be provided for each of > >>> them. If more than one +port is present on a device or more than one > >>> link is connected to a port, a +common scheme, using "#address-cells," > >>> "#size-cells" and "reg" properties is +used. > >>> + > >>> +Optional link properties: > >>> +- remote: phandle to the other endpoint link DT node. > >> > >> This name is a little vague. Perhaps "endpoint" would be better. > > > > "endpoint" can also refer to something local like in USB case. Maybe > > rather the description of the "remote" property should be improved? > > The documentation doesn't show up in all the .dts files that use it; it > might be useful to try and make the .dts file as obviously readable as > possible. > > Perhaps "remote-port" or "connected-port" would be sufficiently descriptive. I like remote-port better than the already proposed remote-link. > (and yes, I know I'm probably bike-shedding now). -- Regards, Laurent Pinchart -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html