On 10/02/2012 08:33 AM, Guennadi Liakhovetski wrote:
> On Tue, 2 Oct 2012, Rob Herring wrote:
>> On 09/27/2012 09:07 AM, Guennadi Liakhovetski wrote:
>>> This patch adds a document, describing common V4L2 device tree bindings.
>>> diff --git a/Documentation/devicetree/bindings/media/v4l2.txt b/Documentation/devicetree/bindings/media/v4l2.txt
>> One other comment below:
>>
>>> +
>>> +General concept
>>> +---------------
>>> +
>>> +Video pipelines consist of external devices, e.g. camera sensors, controlled
>>> +over an I2C, SPI or UART bus, and SoC internal IP blocks, including video DMA
>>> +engines and video data processors.
>>> +
>>> +SoC internal blocks are described by DT nodes, placed similarly to other SoC
>>> +blocks. External devices are represented as child nodes of their respective bus
>>> +controller nodes, e.g. I2C.
>>> +
>>> +Data interfaces on all video devices are described by "port" child DT nodes.
>>> +Configuration of a port depends on other devices participating in the data
>>> +transfer and is described by "link" DT nodes, specified as children of the
>>> +"port" nodes:
>>> +
>>> +/foo {
>>> + port@0 {
>>> + link@0 { ... };
>>> + link@1 { ... };
>>> + };
>>> + port@1 { ... };
>>> +};
>>> +
>>> +If a port can be configured to work with more than one other device on the same
>>> +bus, a "link" child DT node must be provided for each of them. If more than one
>>> +port is present on a device or more than one link is connected to a port, a
>>> +common scheme, using "#address-cells," "#size-cells" and "reg" properties is
>>> +used.
>>> +
>>> +Optional link properties:
>>> +- remote: phandle to the other endpoint link DT node.
>>
>> This name is a little vague. Perhaps "endpoint" would be better.
>
> "endpoint" can also refer to something local like in USB case. Maybe
> rather the description of the "remote" property should be improved?
The documentation doesn't show up in all the .dts files that use it; it
might be useful to try and make the .dts file as obviously readable as
possible.
Perhaps "remote-port" or "connected-port" would be sufficiently descriptive.
(and yes, I know I'm probably bike-shedding now).
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
