Hi, On Tuesday 09 October 2012 09:06:04 P Jackson wrote: > From: Sakari Ailus <sakari.ailus@xxxxxx> > Sent: Monday, 8 October 2012, 23:33 > On Sat, Oct 06, 2012 at 02:47:44PM +0100, P Jackson wrote: > > I'm trying to get an mt9t001 sensor board working on a Gumstix Overo board > > using the latest omap3isp-omap3isp-stable branch from the > > linuxtv.org/media.git repository. > > > > When I 'modprobe omap3-isp' I see: > > > > Linux media interface: v0.10 > > Linux video capture interface: v2.00 > > omap3isp omap3isp: Revision 15.0 found > > omap-iommu omap-iommu.0: isp: version 1.1 > > mt9t001 3-005d: Probing MT9T001 at address 0x5d > > mt9t001 3-005d: MT9T001 detected at address 0x5d > > > > I then do: > > > > media-ctl -r > > media-ctl -l '"mt9t001 3-005d":0->"OMAP3 ISP CCDC":0[1]' > > media-ctl -l '"OMAP3 ISP CCDC":1->"OMAP3 ISP CCDC output":0[1]' > > media-ctl -V '"mt9t001 3-005d":0 [SGRBG10 2048x1536]' > > media-ctl -V '"OMAP3 ISP CCDC":1 [SGRBG10 2048x1536]' > > > > Followed by: > > > > yavta -p -f SGRBG10 -s 2048x1536 -n 4 --capture=1 /dev/video2 file=m.bin > > > > > > For which I get: > > > > Device /dev/video2 opened. > > Device `OMAP3 ISP CCDC output' on `media' is a video capture device. > > Video format set: SGRBG10 (30314142) 2048x1536 (stride 4096) buffer size > > 6291456 Video format: SGRBG10 (30314142) 2048x1536 (stride 4096) buffer > > size 6291456 4 buffers requested. > > length: 6291456 offset: 0 > > Buffer 0 mapped at address 0x40272000. > > length: 6291456 offset: 6291456 > > Buffer 1 mapped at address 0x4096b000. > > length: 6291456 offset: 12582912 > > Buffer 2 mapped at address 0x4102f000. > > length: 6291456 offset: 18874368 > > Buffer 3 mapped at address 0x416ac000. > > Press enter to start capture > > > > After pressing enter I get: > > > > omap3isp omap3isp: no pixel rate control in subdev mt9t001 3-005d > > Unable to start streaming: Invalid argument (22). > > Really? > > Could you check if you have this patch in your tree? > > --- > commit 0bc77f3f06fcf2ca7b7fad782d70926cd4d235f1 > Author: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> > Date: Wed May 9 09:55:57 2012 -0300 > > [media] mt9t001: Implement V4L2_CID_PIXEL_RATE control > > The pixel rate control is required by the OMAP3 ISP driver and should be > implemented by all media controller-compatible sensor drivers. > Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> > Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxx> > Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx> > --- > > I have checked my tree and cannot find that patch. You should then upgrade to v3.6 or backport the patch to your kernel. -- Regards, Laurent Pinchart -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
