Hello!
Sorry for the top post but this is just to check with you if you have
experienced the same problem that I have. See below with some additional
comments.
Roger Mårtensson skrev 2012-03-07 20:21:
Jose Alberto Reguero skrev 2012-03-06 00:23:
On Lunes, 5 de marzo de 2012 21:42:48 Roger Mårtensson escribió:
No. I tested the patch with DVB-T an watch encrypted channels with
vdr without
problems. I don't know why you can't. I don't know gnutv. Try with other
software if you want.
I have done some more testing and it works.. Sort of. :-)
First let me walk through the dmesg.
First I reinsert the CAM-card:
Mar 7 20:12:36 tvpc kernel: [ 959.717666] dvb_ca adapter 2: DVB CAM
detected and initialised successfully
The next lines are when I start Kaffeine. Kaffeine gets a lock on the
encrypted channel and starts viewing it.
Mar 7 20:13:02 tvpc kernel: [ 986.359195] mt2063: detected a mt2063 B3
Mar 7 20:13:03 tvpc kernel: [ 987.368964] drxk: SCU_RESULT_INVPAR
while sending cmd 0x0203 with params:
Mar 7 20:13:03 tvpc kernel: [ 987.368974] drxk: 02 00 00 00 10 00 05
00 03 02 ..........
Mar 7 20:13:06 tvpc kernel: [ 990.286628] dvb_ca adapter 2: DVB CAM
detected and initialised successfully
And now my "sort of"-comment. When I change the to another encrypted
channel in kaffeine I get nothing. To be able to view this channel I
need to restart kaffeine.
The only thing that seems different in the logs are that when
restarting kaffeine I get the "CAM detected and initialised" but when
changing channels I do not get that line.
Maybe there should be another reinit of the CAM somewhere? (just a guess)
I turned on debugging and I see when changing channels from one
encrypted to another I get lots of:
"40 from 0x1read cam data = 0 from 0x1read cam data = 80 from 0x1read
cam data = "
So the drivers is doing something except I don't get anything in
kaffeine until I restart the application.
Now and then I even have to restart kaffeine twice. Same as above.. I
see it reading but nothing happens.
I seem to find some EPG data since it can tell me what programs should
be shown.
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
