Hi Rui,
On Wed, Mar 14, 2012 at 8:28 AM, Rui Salvaterra <rsalvaterra@xxxxxxxxx> wrote:
> Hi, everyone.
>
> I apologise in advance for the noise if this is the wrong place to ask
> such questions. I have a couple of eMPIA EM2710 (Silvercrest) USB
> webcams which work quite well, except for the fact that most of LIRC
Exactly what module do you refer to? Could you just send a snippet
of dmesg when module is loaded?
> is unnecessarily loaded when the em28xx module loads. I suppose it
> shouldn't be necessary, since these are webcams and don't have any
Looking at source code, I noticed two things:
1. You have a module param named "disable-ir", perhaps you could
try to use this (do you know how?).
2. EM2710 board is defined like this:
.name = "EM2710/EM2750/EM2751 webcam grabber",
.xclk = EM28XX_XCLK_FREQUENCY_20MHZ,
.tuner_type = TUNER_ABSENT,
.is_webcam = 1,
.input = { {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = 0,
.amux = EM28XX_AMUX_VIDEO,
.gpio = silvercrest_reg_seq,
} },
As opposed to:
.name = "Terratec Cinergy 250 USB",
.tuner_type = TUNER_LG_PAL_NEW_TAPC,
.has_ir_i2c = 1,
.tda9887_conf = TDA9887_PRESENT,
.decoder = EM28XX_SAA711X,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = SAA7115_COMPOSITE2,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
.amux = EM28XX_AMUX_LINE_IN,
} },
},
Noticed the lack of "has_ir_i2c" definition in the EM2710.
So I don't know how that module is being loaded. Probably I'm missing something.
Hope it helps,
Ezequiel.
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
