On Miércoles, 14 de marzo de 2012 18:45:24 Roger Mårtensson escribió: > Hello! > > Sorry for the top post but this is just to check with you if you have > experienced the same problem that I have. See below with some additional > comments. > > Roger Mårtensson skrev 2012-03-07 20:21: > > Jose Alberto Reguero skrev 2012-03-06 00:23: > >> On Lunes, 5 de marzo de 2012 21:42:48 Roger Mårtensson escribió: > >> > >> No. I tested the patch with DVB-T an watch encrypted channels with > >> vdr without > >> problems. I don't know why you can't. I don't know gnutv. Try with > >> other > >> software if you want. > > > > I have done some more testing and it works.. Sort of. :-) > > > > First let me walk through the dmesg. > > > > First I reinsert the CAM-card: > > > > Mar 7 20:12:36 tvpc kernel: [ 959.717666] dvb_ca adapter 2: DVB CAM > > detected and initialised successfully > > > > The next lines are when I start Kaffeine. Kaffeine gets a lock on the > > encrypted channel and starts viewing it. > > > > Mar 7 20:13:02 tvpc kernel: [ 986.359195] mt2063: detected a mt2063 B3 > > Mar 7 20:13:03 tvpc kernel: [ 987.368964] drxk: SCU_RESULT_INVPAR > > while sending cmd 0x0203 with params: > > Mar 7 20:13:03 tvpc kernel: [ 987.368974] drxk: 02 00 00 00 10 00 05 > > 00 03 02 .......... > > Mar 7 20:13:06 tvpc kernel: [ 990.286628] dvb_ca adapter 2: DVB CAM > > detected and initialised successfully > > > > And now my "sort of"-comment. When I change the to another encrypted > > channel in kaffeine I get nothing. To be able to view this channel I > > need to restart kaffeine. > > > > The only thing that seems different in the logs are that when > > restarting kaffeine I get the "CAM detected and initialised" but when > > changing channels I do not get that line. > > > > Maybe there should be another reinit of the CAM somewhere? (just a > > guess) > > I turned on debugging and I see when changing channels from one > encrypted to another I get lots of: > "40 from 0x1read cam data = 0 from 0x1read cam data = 80 from 0x1read > cam data = " > > So the drivers is doing something except I don't get anything in > kaffeine until I restart the application. > Now and then I even have to restart kaffeine twice. Same as above.. I > see it reading but nothing happens. > > I seem to find some EPG data since it can tell me what programs should > be shown. No, I don't have this problem. The only problem I have is when the reception is not very good, the cam don't work. Perhaps is a kaffeine problem, or a cam specific problem. Jose Alberto -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
