Instead of using dvb_frontend_parameters struct, that were
designed for a subset of the supported standards, use the DVBv5
cache information.
Also, fill the supported delivery systems at dvb_frontend_ops
struct.
Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
---
drivers/media/dvb/dvb-usb/friio-fe.c | 30 +++++++++++++++---------------
1 files changed, 15 insertions(+), 15 deletions(-)
diff --git a/drivers/media/dvb/dvb-usb/friio-fe.c b/drivers/media/dvb/dvb-usb/friio-fe.c
index 7973aaf..375815d 100644
--- a/drivers/media/dvb/dvb-usb/friio-fe.c
+++ b/drivers/media/dvb/dvb-usb/friio-fe.c
@@ -283,22 +283,23 @@ static int jdvbt90502_set_property(struct dvb_frontend *fe,
}
static int jdvbt90502_get_frontend(struct dvb_frontend *fe,
- struct dvb_frontend_parameters *p)
+ struct dtv_frontend_properties *p)
{
p->inversion = INVERSION_AUTO;
- p->u.ofdm.bandwidth = BANDWIDTH_6_MHZ;
- p->u.ofdm.code_rate_HP = FEC_AUTO;
- p->u.ofdm.code_rate_LP = FEC_AUTO;
- p->u.ofdm.constellation = QAM_64;
- p->u.ofdm.transmission_mode = TRANSMISSION_MODE_AUTO;
- p->u.ofdm.guard_interval = GUARD_INTERVAL_AUTO;
- p->u.ofdm.hierarchy_information = HIERARCHY_AUTO;
+ p->bandwidth_hz = 6000000;
+ p->code_rate_HP = FEC_AUTO;
+ p->code_rate_LP = FEC_AUTO;
+ p->modulation = QAM_64;
+ p->transmission_mode = TRANSMISSION_MODE_AUTO;
+ p->guard_interval = GUARD_INTERVAL_AUTO;
+ p->hierarchy = HIERARCHY_AUTO;
return 0;
}
-static int jdvbt90502_set_frontend(struct dvb_frontend *fe,
- struct dvb_frontend_parameters *p)
+static int jdvbt90502_set_frontend(struct dvb_frontend *fe)
{
+ struct dtv_frontend_properties *p = &fe->dtv_property_cache;
+
/**
* NOTE: ignore all the parameters except frequency.
* others should be fixed to the proper value for ISDB-T,
@@ -438,14 +439,13 @@ error:
}
static struct dvb_frontend_ops jdvbt90502_ops = {
-
+ .delsys = { SYS_ISDBT },
.info = {
.name = "Comtech JDVBT90502 ISDB-T",
.type = FE_OFDM,
.frequency_min = 473000000, /* UHF 13ch, center */
.frequency_max = 767142857, /* UHF 62ch, center */
- .frequency_stepsize = JDVBT90502_PLL_CLK /
- JDVBT90502_PLL_DIVIDER,
+ .frequency_stepsize = JDVBT90502_PLL_CLK / JDVBT90502_PLL_DIVIDER,
.frequency_tolerance = 0,
/* NOTE: this driver ignores all parameters but frequency. */
@@ -466,8 +466,8 @@ static struct dvb_frontend_ops jdvbt90502_ops = {
.set_property = jdvbt90502_set_property,
- .set_frontend_legacy = jdvbt90502_set_frontend,
- .get_frontend_legacy = jdvbt90502_get_frontend,
+ .set_frontend = jdvbt90502_set_frontend,
+ .get_frontend = jdvbt90502_get_frontend,
.read_status = jdvbt90502_read_status,
.read_signal_strength = jdvbt90502_read_signal_strength,
--
1.7.8.352.g876a6
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
