Instead of using dvb_frontend_parameters struct, that were
designed for a subset of the supported standards, use the DVBv5
cache information.
Also, fill the supported delivery systems at dvb_frontend_ops
struct.
Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
---
drivers/media/dvb/frontends/bcm3510.c | 19 +++++++++++--------
1 files changed, 11 insertions(+), 8 deletions(-)
diff --git a/drivers/media/dvb/frontends/bcm3510.c b/drivers/media/dvb/frontends/bcm3510.c
index 43b17fa..a53f83a 100644
--- a/drivers/media/dvb/frontends/bcm3510.c
+++ b/drivers/media/dvb/frontends/bcm3510.c
@@ -479,16 +479,16 @@ static int bcm3510_set_freq(struct bcm3510_state* st,u32 freq)
return -EINVAL;
}
-static int bcm3510_set_frontend(struct dvb_frontend* fe,
- struct dvb_frontend_parameters *p)
+static int bcm3510_set_frontend(struct dvb_frontend *fe)
{
+ struct dtv_frontend_properties *c = &fe->dtv_property_cache;
struct bcm3510_state* st = fe->demodulator_priv;
struct bcm3510_hab_cmd_ext_acquire cmd;
struct bcm3510_hab_cmd_bert_control bert;
int ret;
memset(&cmd,0,sizeof(cmd));
- switch (p->u.vsb.modulation) {
+ switch (c->modulation) {
case QAM_256:
cmd.ACQUIRE0.MODE = 0x1;
cmd.ACQUIRE1.SYM_RATE = 0x1;
@@ -499,7 +499,8 @@ static int bcm3510_set_frontend(struct dvb_frontend* fe,
cmd.ACQUIRE1.SYM_RATE = 0x2;
cmd.ACQUIRE1.IF_FREQ = 0x1;
break;
-/* case QAM_256:
+#if 0
+ case QAM_256:
cmd.ACQUIRE0.MODE = 0x3;
break;
case QAM_128:
@@ -513,7 +514,8 @@ static int bcm3510_set_frontend(struct dvb_frontend* fe,
break;
case QAM_16:
cmd.ACQUIRE0.MODE = 0x7;
- break;*/
+ break;
+#endif
case VSB_8:
cmd.ACQUIRE0.MODE = 0x8;
cmd.ACQUIRE1.SYM_RATE = 0x0;
@@ -552,7 +554,8 @@ static int bcm3510_set_frontend(struct dvb_frontend* fe,
bcm3510_bert_reset(st);
- if ((ret = bcm3510_set_freq(st,p->frequency)) < 0)
+ ret = bcm3510_set_freq(st, c->frequency);
+ if (ret < 0)
return ret;
memset(&st->status1,0,sizeof(st->status1));
@@ -819,7 +822,7 @@ error:
EXPORT_SYMBOL(bcm3510_attach);
static struct dvb_frontend_ops bcm3510_ops = {
-
+ .delsys = { SYS_ATSC, SYS_DVBC_ANNEX_B },
.info = {
.name = "Broadcom BCM3510 VSB/QAM frontend",
.type = FE_ATSC,
@@ -839,7 +842,7 @@ static struct dvb_frontend_ops bcm3510_ops = {
.init = bcm3510_init,
.sleep = bcm3510_sleep,
- .set_frontend_legacy = bcm3510_set_frontend,
+ .set_frontend = bcm3510_set_frontend,
.get_tune_settings = bcm3510_get_tune_settings,
.read_status = bcm3510_read_status,
--
1.7.8.352.g876a6
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
