Instead of using dvb_frontend_parameters struct, that were
designed for a subset of the supported standards, use the DVBv5
cache information.
Also, fill the supported delivery systems at dvb_frontend_ops
struct.
Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
---
drivers/media/dvb/frontends/mt312.c | 36 +++++++++++++++++-----------------
1 files changed, 18 insertions(+), 18 deletions(-)
diff --git a/drivers/media/dvb/frontends/mt312.c b/drivers/media/dvb/frontends/mt312.c
index 8f5d2d2..3e4512a 100644
--- a/drivers/media/dvb/frontends/mt312.c
+++ b/drivers/media/dvb/frontends/mt312.c
@@ -531,9 +531,9 @@ static int mt312_read_ucblocks(struct dvb_frontend *fe, u32 *ubc)
return 0;
}
-static int mt312_set_frontend(struct dvb_frontend *fe,
- struct dvb_frontend_parameters *p)
+static int mt312_set_frontend(struct dvb_frontend *fe)
{
+ struct dtv_frontend_properties *p = &fe->dtv_property_cache;
struct mt312_state *state = fe->demodulator_priv;
int ret;
u8 buf[5], config_val;
@@ -553,16 +553,16 @@ static int mt312_set_frontend(struct dvb_frontend *fe,
|| (p->inversion > INVERSION_ON))
return -EINVAL;
- if ((p->u.qpsk.symbol_rate < fe->ops.info.symbol_rate_min)
- || (p->u.qpsk.symbol_rate > fe->ops.info.symbol_rate_max))
+ if ((p->symbol_rate < fe->ops.info.symbol_rate_min)
+ || (p->symbol_rate > fe->ops.info.symbol_rate_max))
return -EINVAL;
- if ((p->u.qpsk.fec_inner < FEC_NONE)
- || (p->u.qpsk.fec_inner > FEC_AUTO))
+ if ((p->fec_inner < FEC_NONE)
+ || (p->fec_inner > FEC_AUTO))
return -EINVAL;
- if ((p->u.qpsk.fec_inner == FEC_4_5)
- || (p->u.qpsk.fec_inner == FEC_8_9))
+ if ((p->fec_inner == FEC_4_5)
+ || (p->fec_inner == FEC_8_9))
return -EINVAL;
switch (state->id) {
@@ -574,7 +574,7 @@ static int mt312_set_frontend(struct dvb_frontend *fe,
ret = mt312_readreg(state, CONFIG, &config_val);
if (ret < 0)
return ret;
- if (p->u.qpsk.symbol_rate >= 30000000) {
+ if (p->symbol_rate >= 30000000) {
/* Note that 30MS/s should use 90MHz */
if (state->freq_mult == 6) {
/* We are running 60MHz */
@@ -609,19 +609,19 @@ static int mt312_set_frontend(struct dvb_frontend *fe,
}
/* sr = (u16)(sr * 256.0 / 1000000.0) */
- sr = mt312_div(p->u.qpsk.symbol_rate * 4, 15625);
+ sr = mt312_div(p->symbol_rate * 4, 15625);
/* SYM_RATE */
buf[0] = (sr >> 8) & 0x3f;
buf[1] = (sr >> 0) & 0xff;
/* VIT_MODE */
- buf[2] = inv_tab[p->inversion] | fec_tab[p->u.qpsk.fec_inner];
+ buf[2] = inv_tab[p->inversion] | fec_tab[p->fec_inner];
/* QPSK_CTRL */
buf[3] = 0x40; /* swap I and Q before QPSK demodulation */
- if (p->u.qpsk.symbol_rate < 10000000)
+ if (p->symbol_rate < 10000000)
buf[3] |= 0x04; /* use afc mode */
/* GO */
@@ -637,7 +637,7 @@ static int mt312_set_frontend(struct dvb_frontend *fe,
}
static int mt312_get_frontend(struct dvb_frontend *fe,
- struct dvb_frontend_parameters *p)
+ struct dtv_frontend_properties *p)
{
struct mt312_state *state = fe->demodulator_priv;
int ret;
@@ -646,11 +646,11 @@ static int mt312_get_frontend(struct dvb_frontend *fe,
if (ret < 0)
return ret;
- ret = mt312_get_symbol_rate(state, &p->u.qpsk.symbol_rate);
+ ret = mt312_get_symbol_rate(state, &p->symbol_rate);
if (ret < 0)
return ret;
- ret = mt312_get_code_rate(state, &p->u.qpsk.fec_inner);
+ ret = mt312_get_code_rate(state, &p->fec_inner);
if (ret < 0)
return ret;
@@ -738,7 +738,7 @@ static void mt312_release(struct dvb_frontend *fe)
#define MT312_SYS_CLK 90000000UL /* 90 MHz */
static struct dvb_frontend_ops mt312_ops = {
-
+ .delsys = { SYS_DVBS },
.info = {
.name = "Zarlink ???? DVB-S",
.type = FE_QPSK,
@@ -761,8 +761,8 @@ static struct dvb_frontend_ops mt312_ops = {
.sleep = mt312_sleep,
.i2c_gate_ctrl = mt312_i2c_gate_ctrl,
- .set_frontend_legacy = mt312_set_frontend,
- .get_frontend_legacy = mt312_get_frontend,
+ .set_frontend = mt312_set_frontend,
+ .get_frontend = mt312_get_frontend,
.get_tune_settings = mt312_get_tune_settings,
.read_status = mt312_read_status,
--
1.7.8.352.g876a6
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
