Ok. I had my doubts on whether to include that or not - But here it is /Jesper [ 1053.784044] usb 1-6: new high speed USB device number 7 using ehci_hcd [ 1054.556036] usb 1-6: device not accepting address 7, error -71 [ 1054.668043] usb 1-6: new high speed USB device number 8 using ehci_hcd [ 1056.136482] usb 1-6: config 1 interface 0 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64 [ 1056.136492] usb 1-6: config 1 interface 0 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64 [ 1056.136501] usb 1-6: config 1 interface 0 altsetting 1 bulk endpoint 0x1 has invalid maxpacket 64 [ 1056.136508] usb 1-6: config 1 interface 0 altsetting 1 bulk endpoint 0x81 has invalid maxpacket 64 [ 1056.137448] dvb-usb: found a 'Anysee DVB USB2.0' in warm state. [ 1056.137553] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 1056.137559] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 1056.137882] DVB: registering new adapter (Anysee DVB USB2.0) [ 1056.141938] anysee: firmware version:1.3 hardware id:11 [ 1056.145212] Invalid probe, probably not a CX24116 device [ 1056.145231] anysee: Unsupported Anysee version. Please report the <linux-media@xxxxxxxxxxxxxxx>. [ 1056.145239] dvb-usb: no frontend was attached by 'Anysee DVB USB2.0' [ 1056.145473] Registered IR keymap rc-anysee [ 1056.145709] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/rc/rc1/input15 [ 1056.145858] rc1: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/rc/rc1 [ 1056.145866] dvb-usb: schedule remote query interval to 250 msecs. [ 1056.145873] dvb-usb: Anysee DVB USB2.0 successfully initialized and connected. On Tue, Dec 20, 2011 at 5:07 AM, Antti Palosaari <crope@xxxxxx> wrote: > On 12/20/2011 03:04 AM, Jesper Krogh wrote: >> >> Hi >> >> I have a brand new Anysee E30 S2 plus, but with most recent >> media_build.git - it is reported as the wrong model. >> >> I have attached a copy of my lsusb output. > > > That don't help at all. You should look from system log what it says. Use > dmesg command for that. > > > Antti > > > -- > http://palosaari.fi/ -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
