W dniu 2011-12-14 07:13, Adeq pisze:
Malcolm Priestley<tvboxspy<at> gmail.com> writes:
Support for IT1935 9006 devices.
9006 have version 2 type chip.
9006 devices should use dvb-usb-it9135-02.fw firmware.
On the device tested the tuner id was set to 0 which meant
the driver used tuner id 0x38. The device functioned normally.
Hello,
my device (048d:9006) isn't fully working, here is dmesg log:
[code]
[ 281.724044] usb 1-3: new high-speed USB device number 10 using ehci_hcd
[ 281.860585] usb 1-3: New USB device found, idVendor=048d, idProduct=9006
[ 281.860594] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 281.860601] usb 1-3: Product: DVB-T TV Stick
[ 281.860607] usb 1-3: Manufacturer: ITE Technologies, Inc.
[ 281.861694] it913x: Chip Version=02 Chip Type=9135
[ 281.863193] it913x: Dual mode=0 Remote=1 Tuner Type=0
[ 281.864444] dvb-usb: found a 'ITE 9135(9006) Generic' in cold state, will try
to load a firmware
[ 281.870053] dvb-usb: downloading firmware from file 'dvb-usb-it9135-02.fw'
[ 281.870438] it913x: FRM Starting Firmware Download
[ 282.388032] it913x: FRM Firmware Download Failed (ffffffff)
[ 282.588116] it913x: Chip Version=79 Chip Type=4af3
[ 283.224203] it913x: DEV it913x Error
[ 283.227753] input: ITE Technologies, Inc. DVB-T TV Stick as
/devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.1/input/input17
[ 283.228415] generic-usb 0003:048D:9006.0007: input,hidraw0: USB HID v1.01
Keyboard [ITE Technologies, Inc. DVB-T TV Stick] on usb-0000:00:1d.7-3/input1
or
[ 292.444049] usb 1-3: new high-speed USB device number 11 using ehci_hcd
[ 292.580449] usb 1-3: New USB device found, idVendor=048d, idProduct=9006
[ 292.580458] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 292.580465] usb 1-3: Product: DVB-T TV Stick
[ 292.580471] usb 1-3: Manufacturer: ITE Technologies, Inc.
[ 292.581557] it913x: Chip Version=02 Chip Type=9135
[ 292.583051] it913x: Dual mode=0 Remote=1 Tuner Type=0
[ 292.584284] dvb-usb: found a 'ITE 9135(9006) Generic' in cold state, will try
to load a firmware
[ 292.589938] dvb-usb: downloading firmware from file 'dvb-usb-it9135-02.fw'
[ 292.590302] it913x: FRM Starting Firmware Download
[ 292.908023] it913x: FRM Firmware Download Completed - Resetting Device
[ 292.908534] it913x: Chip Version=02 Chip Type=9135
[ 292.909032] it913x: Firmware Version 52887808
[ 293.144182] it913x: DEV it913x Error
[ 293.147862] input: ITE Technologies, Inc. DVB-T TV Stick as
/devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.1/input/input18
[ 293.152345] generic-usb 0003:048D:9006.0008: input,hidraw0: USB HID v1.01
Keyboard [ITE Technologies, Inc. DVB-T TV Stick] on usb-0000:00:1d.7-3/input1
[/code]
I'm using this device: http://www.runteck.com/products_view.php?Id=24&S_Id=2
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
After updating firmware.
warmboot:
[ 984.370447] dvb-usb: ITE 9135(9006) Generic successfully
deinitialized and disconnected.
[ 1000.884812] it913x: Chip Version=02 Chip Type=9135
[ 1000.885309] it913x: Firmware Version 52887808
[ 1000.886808] it913x: Dual mode=0 Remote=1 Tuner Type=0
[ 1000.886814] dvb-usb: found a 'ITE 9135(9006) Generic' in warm state.
[ 1000.887540] dvb-usb: will use the device's hardware PID filter (table
count: 31).
[ 1000.887857] DVB: registering new adapter (ITE 9135(9006) Generic)
[ 1000.891586] it913x-fe: ADF table value :00
[ 1000.891596] it913x: Message out (0000d8b401313938)
[ 1000.892197] it913x: Message out (0000d8b50100d8b4)
[ 1000.892685] it913x: Message out (0000d8b30100d8b5)
[ 1000.893185] it913x: Message out (0000f6413800d8b3)
[ 1000.893560] it913x: Message out (0000f5ca0100f641)
[ 1001.092205] it913x: Message out (0000f7150100f5ca)
[ 1001.292097] it913x: Message out (0000002500006000)
[ 1001.492099] it913x: Message out (0000f1cd0000a200)
[ 1001.692107] it913x: Message out (0000004501dc4cf5)
[ 1001.892111] it913x: Message out (0000002900000000)
[ 1002.092113] it913x-fe: Crystal Frequency :12000000 Adc Frequency
:20250000 ADC X2: 01
[ 1002.092141] dvb-usb: no frontend was attached by 'ITE 9135(9006) Generic'
[ 1002.092159] Registered IR keymap rc-msi-digivox-iii
[ 1002.092392] input: IR-receiver inside an USB DVB receiver as
/devices/pci0000:00/0000:00:1d.7/usb1/1-3/rc/rc1/input15
[ 1002.095747] rc1: IR-receiver inside an USB DVB receiver as
/devices/pci0000:00/0000:00:1d.7/usb1/1-3/rc/rc1
[ 1002.095757] dvb-usb: schedule remote query interval to 250 msecs.
[ 1002.095765] dvb-usb: ITE 9135(9006) Generic successfully initialized
and connected.
[ 1002.095770] it913x: DEV registering device driver
[ 1002.095826] usbcore: registered new interface driver it913x
coldboot:
[ 1103.536156] it913x: Chip Version=ec Chip Type=5830
[ 1104.336178] it913x: Dual mode=92 Remote=92 Tuner Type=92
[ 1106.248116] dvb-usb: found a 'ITE 9135(9006) Generic' in cold state,
will try to load a firmware
[ 1106.253773] dvb-usb: downloading firmware from file
'dvb-usb-it9135-02.fw'
[ 1106.452123] it913x: FRM Starting Firmware Download
[ 1130.756039] it913x: FRM Firmware Download Failed (ffffff92)
[ 1130.956168] it913x: Chip Version=79 Chip Type=5823
[ 1131.592192] it913x: DEV it913x Error
[ 1131.592271] usbcore: registered new interface driver it913x
No frontend is generated anyway.
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
