On Wed, 2011-12-14 at 06:13 +0000, Adeq wrote: > Malcolm Priestley <tvboxspy <at> gmail.com> writes: > > > > > Support for IT1935 9006 devices. > > > > 9006 have version 2 type chip. > > > > 9006 devices should use dvb-usb-it9135-02.fw firmware. > > > > On the device tested the tuner id was set to 0 which meant > > the driver used tuner id 0x38. The device functioned normally. > > > > Hello, > > my device (048d:9006) isn't fully working, here is dmesg log: > > [code] > [ 281.724044] usb 1-3: new high-speed USB device number 10 using ehci_hcd > [ 281.860585] usb 1-3: New USB device found, idVendor=048d, idProduct=9006 > [ 281.860594] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > [ 281.860601] usb 1-3: Product: DVB-T TV Stick > [ 281.860607] usb 1-3: Manufacturer: ITE Technologies, Inc. > [ 281.861694] it913x: Chip Version=02 Chip Type=9135 > [ 281.863193] it913x: Dual mode=0 Remote=1 Tuner Type=0 > [ 281.864444] dvb-usb: found a 'ITE 9135(9006) Generic' in cold state, will try > to load a firmware > [ 281.870053] dvb-usb: downloading firmware from file 'dvb-usb-it9135-02.fw' > [ 281.870438] it913x: FRM Starting Firmware Download > [ 282.388032] it913x: FRM Firmware Download Failed (ffffffff) > [ 282.588116] it913x: Chip Version=79 Chip Type=4af3 > [ 283.224203] it913x: DEV it913x Error > [ 283.227753] input: ITE Technologies, Inc. DVB-T TV Stick as Try using the following for firmware. dd if=dvb-usb-it9135.fw ibs=1 skip=64 count=8128 of=dvb-usb-it9135-01.fw dd if=dvb-usb-it9135.fw ibs=1 skip=12866 count=5731 of=dvb-usb-it9135-02.fw I have got length of dvb-usb-it9135-02.fw wrong it was changed to 5731. However, 5817 should be correct in emulation, but fails with device. The firmware version should say it913x: Firmware Version 50594048 I will have to check the firmware loader again. Regards Malcolm -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
