Hello On 08/13/2011 10:36 PM, Chris Rankin wrote: > I've just acquired a PCTV 290e nanostick, and have successfully tuned it into a DVB-T2 MUX. Yay! :-). > > However, before declaring total victory, I have noticed that no-one has yet wired up the device's IR support in the em28xx driver. The adapter ships with a tiny RC with only 26 buttons, which would allow me to use the 290e with VDR. Does anyone know what kind of IR hardware the 290e uses, please? I tried setting: > > .has_ir_i2c = 1 > > in the [EM28174_BOARD_PCTV_290E] section of em28xx_cards.c, but saw nothing new in the dmesg log. (Yes, the ir_kdb_i2c modules did load successfully.) The /sys/bus/i2c/devices directory contains two nodes: > > em28xx #0 > CXD2820R tuner I2C adapter > > Any (non-destructive) suggestions for other things to try to get IR working would be gratefully received. Remote is already supported, but from the 3.1 or maybe 3.2 (I am not sure if Mauro was hurry to sent it 3.1). Anyhow, if you need it please install latest v4l-dvb drivers. Thank you for the report. regards, Antti -- http://palosaari.fi/ -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
