On Wed, Jul 27, 2011 at 11:49 AM, Joel A Fernandes <agnel.joel@xxxxxxxxx> wrote: >>>> Joel, >>>> >>>> I gave this a try this weekend. I ran into a few problems/questions. >>>> >>>> I wanted to try with pre-built (tested?) binaries so I grabbed yours >>>> (used your uImage): >>>> 1. media-ctl binary does not work because there is no libmediactl.so >>>> on my Angstrom root FS. >>>> 2. There was no yavta-nc application. >>> >>> have you tried 'opkg update ; opkg install mediactl yavta-nc' ? >>> >> >> Showing my Angstrom ignorance here, but I cannot get these packages >> via opkg update. I use Narcissus builder - I built a new FS yesterday >> using 2011.03 - should I have used "next". It runs fine, but when I do >> the opkg update; opkg install yavta-nc it fails. I see media-ctl and >> yavta-nc in the package browser website, but my guess is they are for >> "newer" builds? >> > > What is the failure? If you have some output, could you paste it? > > As a last resort, you could download the .ipk from Angstrom Package > browser, and uncompress it to get yavta-nc > > Thanks, > Joel The error is what you would expect: "package not found" I did try downloading the .ipk, but it fails to install because "libc6 is too old". If I try to update libc6, it says it is already the latest. This is the point about being on an old release (2011.03 vs next). Mark -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
