Re: [beagleboard] [RFC v1] mt9v113: VGA camera sensor driver and support for BeagleBoard

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Op 25 jul. 2011, om 18:56 heeft Mark Grosen het volgende geschreven:

> On Wed, Jul 13, 2011 at 11:22 AM, Joel A Fernandes <agnel.joel@xxxxxxxxx> wrote:
>> * Adds support for mt9v113 sensor by borrowing heavily from PSP 2.6.37 kernel patches
>> * Adapted to changes in v4l2 framework and ISP driver
>> 
>> Signed-off-by: Joel A Fernandes <agnel.joel@xxxxxxxxx>
>> ---
>> This patch will apply against the 2.6.39 kernel built from the OE-development tree (Which is essentially
>> the v2.6.39 from the main tree with OE patches for BeagleBoard support and a few other features)
>> 
>> If you have the Leapord imaging camera board with this particular sensor, I would apprecite it if anyone could
>> try this patch out and provide any feedback/test results.
>> 
>> To get the complete tree which works on a BeagleBoard-xM with all the OE patches and this patch,
>> you can clone: https://github.com/joelagnel/linux-omap-2.6/tree/oedev-2.6.39-mt9v113
>> 
>> It will compile and work on a BeagleBoard-xM with the defconfig at:
>> http://cgit.openembedded.org/cgit.cgi/openembedded/tree/recipes/linux/linux-omap-2.6.39/beagleboard/defconfig
>> 
>> Also you will need to apply my media-ctl patch (or clone the tree) to setup the formats:
>> https://github.com/joelagnel/media-ctl/commit/cdf24d1249ac1ff3cd6f70ad80c3b76ac28ba0d5
>> 
>> Binaries for quick testing on a BeagleBoard-xM:
>> U-boot: http://utdallas.edu/~joel.fernandes/u-boot.bin
>> U-boot: http://utdallas.edu/~joel.fernandes/MLO
>> uEnv.txt: http://utdallas.edu/~joel.fernandes/uEnv.txt
>> media-ctl: http://utdallas.edu/~joel.fernandes/media-ctl
>> kernel: http://utdallas.edu/~joel.fernandes/uImage
>> 
>> media-ctl/yavta commands you could use to get it to show a picture can be found at:
>> http://utdallas.edu/~joel.fernandes/stream.sh
>> 
> 
> Joel,
> 
> I gave this a try this weekend. I ran into a few problems/questions.
> 
> I wanted to try with pre-built (tested?) binaries so I grabbed yours
> (used your uImage):
> 1. media-ctl binary does not work because there is no libmediactl.so
> on my Angstrom root FS.
> 2. There was no yavta-nc application.

have you tried 'opkg update ; opkg install mediactl yavta-nc' ?--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux