Em 31-03-2011 16:50, Mauro Carvalho Chehab escreveu:
> Em 31-03-2011 14:15, handygewinnspiel@xxxxxx escreveu:
>>
>>> Em 29-03-2011 20:21, Mauro Carvalho Chehab escreveu:
>>>> Em 29-03-2011 17:11, handygewinnspiel@xxxxxx escreveu:
>>>>> So I changed it now to scan any srate for 6MHz networks, but skip over
>>> those which are unsupported by bandwidth limitation.
>>> ...
>>>> Anyway, I'll test the today's version and reply if I detect any troubles
>>> on it.
>>>
>>> Test results:
>>>
>>> $ ./w_scan -c BR -fc
>>> Took about 30 mins for scan. As the board I'm using doesn't support
>>> QAM_AUTO
>>> for DVB-C, it seek only QAM_64
>>
>> This is unexpected && should be fixed to fit to w_scan's default behaviour: first QAM_64, then QAM_256.
>>
>> Can you pls re-check with the following change in countries.c line 500ff
>>
>> /*
>> * start/stop values for dvbc qam loop
>> * 0 == QAM_64, 1 == QAM_256, 2 == QAM_128
>> */
>> int dvbc_qam_max(int channel, int channellist) {
>> switch(channellist) {
>> case DVBC_FI: return 2; //QAM128
>> + case DVBC_BR:
>> case DVBC_FR:
>> case DVBC_QAM: return 1; //QAM256
>> default: return 0; //no qam loop
>> }
>> }
>>
>>
>> int dvbc_qam_min(int channel, int channellist) {
>> switch(channellist) {
>> case DVBC_FI:
>> + case DVBC_BR:
>> case DVBC_FR:
>> case DVBC_QAM: return 0; //QAM64
>> default: return 0; //no qam loop
>> }
>> }
Forgot to comment: the above fixed w_scan probe with default parameters.
Thanks!
Mauro
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
