> Em 29-03-2011 20:21, Mauro Carvalho Chehab escreveu: > > Em 29-03-2011 17:11, handygewinnspiel@xxxxxx escreveu: > >> So I changed it now to scan any srate for 6MHz networks, but skip over > those which are unsupported by bandwidth limitation. > ... > > Anyway, I'll test the today's version and reply if I detect any troubles > on it. > > Test results: > > $ ./w_scan -c BR -fc > Took about 30 mins for scan. As the board I'm using doesn't support > QAM_AUTO > for DVB-C, it seek only QAM_64 This is unexpected && should be fixed to fit to w_scan's default behaviour: first QAM_64, then QAM_256. Can you pls re-check with the following change in countries.c line 500ff /* * start/stop values for dvbc qam loop * 0 == QAM_64, 1 == QAM_256, 2 == QAM_128 */ int dvbc_qam_max(int channel, int channellist) { switch(channellist) { case DVBC_FI: return 2; //QAM128 + case DVBC_BR: case DVBC_FR: case DVBC_QAM: return 1; //QAM256 default: return 0; //no qam loop } } int dvbc_qam_min(int channel, int channellist) { switch(channellist) { case DVBC_FI: + case DVBC_BR: case DVBC_FR: case DVBC_QAM: return 0; //QAM64 default: return 0; //no qam loop } } I don't think that adding QAM_128 makes sense. Later, if i have more reports from 6MHz network users, i will reduce the number of symbol rates. -- Empfehlen Sie GMX DSL Ihren Freunden und Bekannten und wir belohnen Sie mit bis zu 50,- Euro! https://freundschaftswerbung.gmx.de -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html