On 12/29/2010 02:12 AM, Hyunwoong Kim wrote:
> Horizontal and vertical scaling range are according to the following equations.
> If (SRC_Width >= 64 x DST_Width) { Exit(-1); /* Out of Horizontal scale range}
> If (SRC_Height >= 64 x DST_Height) { Exit(-1); /* Out of Vertical scale range}
>
> fimc_check_scaler_ratio() is used to check if horizontal and vertical
> scale range are valid or not. To use fimc_check_scaler_ratio,
> source and destination format should be set by VIDIOC_S_FMT.
> And in case of scaling up, it doesn't have to check the scale range.
>
> Reviewed-by: Jonghun Han <jonghun.han@xxxxxxxxxxx>
> Signed-off-by: Hyunwoong Kim <khw0178.kim@xxxxxxxxxxx>
> ---
> Changes since V1:
> - change the definition of fimc_check_scaler_ratio()
> - remove the code to copy arguments
>
> This patch is depended on Hyunwoong Kim's last patch.
> - [PATCH v2] [media] s5p-fimc: Configure scaler registers depending on FIMC version
>
> drivers/media/video/s5p-fimc/fimc-capture.c | 4 +-
> drivers/media/video/s5p-fimc/fimc-core.c | 59 ++++++++++++++++++---------
> drivers/media/video/s5p-fimc/fimc-core.h | 2 +-
> 3 files changed, 44 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/media/video/s5p-fimc/fimc-capture.c b/drivers/media/video/s5p-fimc/fimc-capture.c
> index b1cb937..e22a78c 100644
> --- a/drivers/media/video/s5p-fimc/fimc-capture.c
> +++ b/drivers/media/video/s5p-fimc/fimc-capture.c
> @@ -761,7 +761,9 @@ static int fimc_cap_s_crop(struct file *file, void *fh,
>
> f = &ctx->s_frame;
> /* Check for the pixel scaling ratio when cropping input image. */
> - ret = fimc_check_scaler_ratio(&cr->c, &ctx->d_frame);
> + ret = fimc_check_scaler_ratio(cr->c.width, cr->c.height,
> + ctx->d_frame.width, ctx->d_frame.height,
> + ctx->rotation);
> if (ret) {
> v4l2_err(&fimc->vid_cap.v4l2_dev, "Out of the scaler range");
> return ret;
> diff --git a/drivers/media/video/s5p-fimc/fimc-core.c b/drivers/media/video/s5p-fimc/fimc-core.c
> index 2b65961..e608fb8 100644
> --- a/drivers/media/video/s5p-fimc/fimc-core.c
> +++ b/drivers/media/video/s5p-fimc/fimc-core.c
> @@ -198,24 +198,21 @@ static struct v4l2_queryctrl *get_ctrl(int id)
> return NULL;
> }
>
> -int fimc_check_scaler_ratio(struct v4l2_rect *r, struct fimc_frame *f)
> +int fimc_check_scaler_ratio(int sw, int sh, int dw, int dh, int rot)
> {
> - if (r->width > f->width) {
> - if (f->width > (r->width * SCALER_MAX_HRATIO))
> - return -EINVAL;
> - } else {
> - if ((f->width * SCALER_MAX_HRATIO) < r->width)
> - return -EINVAL;
> - }
> + int tx, ty;
>
> - if (r->height > f->height) {
> - if (f->height > (r->height * SCALER_MAX_VRATIO))
> - return -EINVAL;
> + if (rot == 90 || rot == 270) {
> + ty = dw;
> + tx = dh;
> } else {
> - if ((f->height * SCALER_MAX_VRATIO) < r->height)
> - return -EINVAL;
> + tx = dw;
> + ty = dh;
> }
>
> + if ((sw >= SCALER_MAX_HRATIO * tx) || (sh >= SCALER_MAX_VRATIO * ty))
> + return -EINVAL;
> +
> return 0;
> }
>
> @@ -1063,6 +1060,7 @@ int fimc_s_ctrl(struct fimc_ctx *ctx, struct v4l2_control *ctrl)
> struct samsung_fimc_variant *variant = ctx->fimc_dev->variant;
> struct fimc_dev *fimc = ctx->fimc_dev;
> unsigned long flags;
> + int ret = 0;
>
> if (ctx->rotation != 0 &&
> (ctrl->id == V4L2_CID_HFLIP || ctrl->id == V4L2_CID_VFLIP)) {
> @@ -1089,6 +1087,20 @@ int fimc_s_ctrl(struct fimc_ctx *ctx, struct v4l2_control *ctrl)
> break;
>
> case V4L2_CID_ROTATE:
> + if (!(~ctx->state & (FIMC_DST_FMT | FIMC_SRC_FMT))) {
> + ret = fimc_check_scaler_ratio(ctx->s_frame.width,
> + ctx->s_frame.height,
> + ctx->d_frame.width,
> + ctx->d_frame.height,
> + ctrl->value);
> + if (ret) {
> + v4l2_err(&fimc->m2m.v4l2_dev,
> + "Out of scaler range");
> + spin_unlock_irqrestore(&ctx->slock, flags);
> + return -EINVAL;
> + }
> + }
> +
> /* Check for the output rotator availability */
> if ((ctrl->value == 90 || ctrl->value == 270) &&
> (ctx->in_path == FIMC_DMA && !variant->has_out_rot)) {
> @@ -1237,18 +1249,27 @@ static int fimc_m2m_s_crop(struct file *file, void *fh, struct v4l2_crop *cr)
> &ctx->s_frame : &ctx->d_frame;
>
> spin_lock_irqsave(&ctx->slock, flags);
> - if (~ctx->state & (FIMC_SRC_FMT | FIMC_DST_FMT)) {
> - /* Check to see if scaling ratio is within supported range */
> - if (cr->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
> - ret = fimc_check_scaler_ratio(&cr->c, &ctx->d_frame);
> - else
> - ret = fimc_check_scaler_ratio(&cr->c, &ctx->s_frame);
> + /* Check to see if scaling ratio is within supported range */
> + if (!(~ctx->state & (FIMC_DST_FMT | FIMC_SRC_FMT))) {
> + if (cr->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
> + ret = fimc_check_scaler_ratio(cr->c.width, cr->c.height,
> + ctx->d_frame.width,
> + ctx->d_frame.height,
> + ctx->rotation);
> + } else {
> + ret = fimc_check_scaler_ratio(ctx->s_frame.width,
> + ctx->s_frame.height,
> + cr->c.width, cr->c.height,
> + ctx->rotation);
> + }
> +
> if (ret) {
> v4l2_err(&fimc->m2m.v4l2_dev, "Out of scaler range");
> spin_unlock_irqrestore(&ctx->slock, flags);
> return -EINVAL;
> }
> }
> +
> ctx->state |= FIMC_PARAMS;
>
> f->offs_h = cr->c.left;
> diff --git a/drivers/media/video/s5p-fimc/fimc-core.h b/drivers/media/video/s5p-fimc/fimc-core.h
> index d690398..b442fed 100644
> --- a/drivers/media/video/s5p-fimc/fimc-core.h
> +++ b/drivers/media/video/s5p-fimc/fimc-core.h
> @@ -605,7 +605,7 @@ struct fimc_fmt *find_format(struct v4l2_format *f, unsigned int mask);
> struct fimc_fmt *find_mbus_format(struct v4l2_mbus_framefmt *f,
> unsigned int mask);
>
> -int fimc_check_scaler_ratio(struct v4l2_rect *r, struct fimc_frame *f);
> +int fimc_check_scaler_ratio(int sw, int sh, int dw, int dh, int rot);
> int fimc_set_scaler_info(struct fimc_ctx *ctx);
> int fimc_prepare_config(struct fimc_ctx *ctx, u32 flags);
> int fimc_prepare_addr(struct fimc_ctx *ctx, struct vb2_buffer *vb,
Applied. Thank you.
Regards,
--
Sylwester Nawrocki
Samsung Poland R&D Center
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
