Horizontal and vertical scaling range are according to the following equations.
If (SRC_Width >= 64 x DST_Width) { Exit(-1); /* Out of Horizontal scale range}
If (SRC_Height >= 64 x DST_Height) { Exit(-1); /* Out of Vertical scale range}
fimc_check_scaler_ratio() is used to check if horizontal and vertical
scale range are valid or not. To use fimc_check_scaler_ratio,
source and destination format should be set by VIDIOC_S_FMT.
And in case of scaling up, it doesn't have to check the scale range.
Reviewed-by: Jonghun Han <jonghun.han@xxxxxxxxxxx>
Signed-off-by: Hyunwoong Kim <khw0178.kim@xxxxxxxxxxx>
---
Changes since V1:
- change the definition of fimc_check_scaler_ratio()
- remove the code to copy arguments
This patch is depended on Hyunwoong Kim's last patch.
- [PATCH v2] [media] s5p-fimc: Configure scaler registers depending on FIMC version
drivers/media/video/s5p-fimc/fimc-capture.c | 4 +-
drivers/media/video/s5p-fimc/fimc-core.c | 59 ++++++++++++++++++---------
drivers/media/video/s5p-fimc/fimc-core.h | 2 +-
3 files changed, 44 insertions(+), 21 deletions(-)
diff --git a/drivers/media/video/s5p-fimc/fimc-capture.c b/drivers/media/video/s5p-fimc/fimc-capture.c
index b1cb937..e22a78c 100644
--- a/drivers/media/video/s5p-fimc/fimc-capture.c
+++ b/drivers/media/video/s5p-fimc/fimc-capture.c
@@ -761,7 +761,9 @@ static int fimc_cap_s_crop(struct file *file, void *fh,
f = &ctx->s_frame;
/* Check for the pixel scaling ratio when cropping input image. */
- ret = fimc_check_scaler_ratio(&cr->c, &ctx->d_frame);
+ ret = fimc_check_scaler_ratio(cr->c.width, cr->c.height,
+ ctx->d_frame.width, ctx->d_frame.height,
+ ctx->rotation);
if (ret) {
v4l2_err(&fimc->vid_cap.v4l2_dev, "Out of the scaler range");
return ret;
diff --git a/drivers/media/video/s5p-fimc/fimc-core.c b/drivers/media/video/s5p-fimc/fimc-core.c
index 2b65961..e608fb8 100644
--- a/drivers/media/video/s5p-fimc/fimc-core.c
+++ b/drivers/media/video/s5p-fimc/fimc-core.c
@@ -198,24 +198,21 @@ static struct v4l2_queryctrl *get_ctrl(int id)
return NULL;
}
-int fimc_check_scaler_ratio(struct v4l2_rect *r, struct fimc_frame *f)
+int fimc_check_scaler_ratio(int sw, int sh, int dw, int dh, int rot)
{
- if (r->width > f->width) {
- if (f->width > (r->width * SCALER_MAX_HRATIO))
- return -EINVAL;
- } else {
- if ((f->width * SCALER_MAX_HRATIO) < r->width)
- return -EINVAL;
- }
+ int tx, ty;
- if (r->height > f->height) {
- if (f->height > (r->height * SCALER_MAX_VRATIO))
- return -EINVAL;
+ if (rot == 90 || rot == 270) {
+ ty = dw;
+ tx = dh;
} else {
- if ((f->height * SCALER_MAX_VRATIO) < r->height)
- return -EINVAL;
+ tx = dw;
+ ty = dh;
}
+ if ((sw >= SCALER_MAX_HRATIO * tx) || (sh >= SCALER_MAX_VRATIO * ty))
+ return -EINVAL;
+
return 0;
}
@@ -1063,6 +1060,7 @@ int fimc_s_ctrl(struct fimc_ctx *ctx, struct v4l2_control *ctrl)
struct samsung_fimc_variant *variant = ctx->fimc_dev->variant;
struct fimc_dev *fimc = ctx->fimc_dev;
unsigned long flags;
+ int ret = 0;
if (ctx->rotation != 0 &&
(ctrl->id == V4L2_CID_HFLIP || ctrl->id == V4L2_CID_VFLIP)) {
@@ -1089,6 +1087,20 @@ int fimc_s_ctrl(struct fimc_ctx *ctx, struct v4l2_control *ctrl)
break;
case V4L2_CID_ROTATE:
+ if (!(~ctx->state & (FIMC_DST_FMT | FIMC_SRC_FMT))) {
+ ret = fimc_check_scaler_ratio(ctx->s_frame.width,
+ ctx->s_frame.height,
+ ctx->d_frame.width,
+ ctx->d_frame.height,
+ ctrl->value);
+ if (ret) {
+ v4l2_err(&fimc->m2m.v4l2_dev,
+ "Out of scaler range");
+ spin_unlock_irqrestore(&ctx->slock, flags);
+ return -EINVAL;
+ }
+ }
+
/* Check for the output rotator availability */
if ((ctrl->value == 90 || ctrl->value == 270) &&
(ctx->in_path == FIMC_DMA && !variant->has_out_rot)) {
@@ -1237,18 +1249,27 @@ static int fimc_m2m_s_crop(struct file *file, void *fh, struct v4l2_crop *cr)
&ctx->s_frame : &ctx->d_frame;
spin_lock_irqsave(&ctx->slock, flags);
- if (~ctx->state & (FIMC_SRC_FMT | FIMC_DST_FMT)) {
- /* Check to see if scaling ratio is within supported range */
- if (cr->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
- ret = fimc_check_scaler_ratio(&cr->c, &ctx->d_frame);
- else
- ret = fimc_check_scaler_ratio(&cr->c, &ctx->s_frame);
+ /* Check to see if scaling ratio is within supported range */
+ if (!(~ctx->state & (FIMC_DST_FMT | FIMC_SRC_FMT))) {
+ if (cr->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
+ ret = fimc_check_scaler_ratio(cr->c.width, cr->c.height,
+ ctx->d_frame.width,
+ ctx->d_frame.height,
+ ctx->rotation);
+ } else {
+ ret = fimc_check_scaler_ratio(ctx->s_frame.width,
+ ctx->s_frame.height,
+ cr->c.width, cr->c.height,
+ ctx->rotation);
+ }
+
if (ret) {
v4l2_err(&fimc->m2m.v4l2_dev, "Out of scaler range");
spin_unlock_irqrestore(&ctx->slock, flags);
return -EINVAL;
}
}
+
ctx->state |= FIMC_PARAMS;
f->offs_h = cr->c.left;
diff --git a/drivers/media/video/s5p-fimc/fimc-core.h b/drivers/media/video/s5p-fimc/fimc-core.h
index d690398..b442fed 100644
--- a/drivers/media/video/s5p-fimc/fimc-core.h
+++ b/drivers/media/video/s5p-fimc/fimc-core.h
@@ -605,7 +605,7 @@ struct fimc_fmt *find_format(struct v4l2_format *f, unsigned int mask);
struct fimc_fmt *find_mbus_format(struct v4l2_mbus_framefmt *f,
unsigned int mask);
-int fimc_check_scaler_ratio(struct v4l2_rect *r, struct fimc_frame *f);
+int fimc_check_scaler_ratio(int sw, int sh, int dw, int dh, int rot);
int fimc_set_scaler_info(struct fimc_ctx *ctx);
int fimc_prepare_config(struct fimc_ctx *ctx, u32 flags);
int fimc_prepare_addr(struct fimc_ctx *ctx, struct vb2_buffer *vb,
--
1.6.2.5
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
