Hi all, I have a Satix-S2 Dual and I'm trying to get to work without his CI in a first time. I'm trying ngene-test2 from http://linuxtv.org/hg/~endriss/ngene-test2/ under 2.6.32-21-generic. It contains too much nodes (extra demuxes, dvrs & nets): > ubuntu@ubuntu:~/ngene-test2/v4l$ ls -l /dev/dvb/adapter* > total 0 > crw-rw----+ 1 root video 212, 0 2010-12-26 13:08 demux0 > crw-rw----+ 1 root video 212, 4 2010-12-26 13:08 demux1 > crw-rw----+ 1 root video 212, 8 2010-12-26 13:08 demux2 > crw-rw----+ 1 root video 212, 11 2010-12-26 13:08 demux3 > crw-rw----+ 1 root video 212, 14 2010-12-26 13:08 demux4 > crw-rw----+ 1 root video 212, 1 2010-12-26 13:08 dvr0 > crw-rw----+ 1 root video 212, 5 2010-12-26 13:08 dvr1 > crw-rw----+ 1 root video 212, 9 2010-12-26 13:08 dvr2 > crw-rw----+ 1 root video 212, 12 2010-12-26 13:08 dvr3 > crw-rw----+ 1 root video 212, 15 2010-12-26 13:08 dvr4 > crw-rw----+ 1 root video 212, 3 2010-12-26 13:08 frontend0 > crw-rw----+ 1 root video 212, 7 2010-12-26 13:08 frontend1 > crw-rw----+ 1 root video 212, 2 2010-12-26 13:08 net0 > crw-rw----+ 1 root video 212, 6 2010-12-26 13:08 net1 > crw-rw----+ 1 root video 212, 10 2010-12-26 13:08 net2 > crw-rw----+ 1 root video 212, 13 2010-12-26 13:08 net3 > crw-rw----+ 1 root video 212, 16 2010-12-26 13:08 net4 Is it connected to this commit (http://linuxtv.org/hg/~endriss/ngene-test2/rev/eb4142f0d0ac) about "Support up to 4 tuners for cineS2 v5, duoflex & mystique v2" ? Here is what dmesg reports I do 'modprobe ngene' > [ 3248.072496] nGene PCIE bridge driver, Copyright (C) 2005-2007 Micronas > [ 3248.072533] ngene 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > [ 3248.072548] ngene: Found Mystique SaTiX-S2 Dual (v2) > [ 3248.075765] ngene 0000:02:00.0: setting latency timer to 64 > [ 3248.075926] ngene: Device version 1 > [ 3248.075938] ngene 0000:02:00.0: firmware: requesting ngene_18.fw > [ 3248.079319] ngene: Loading firmware file ngene_18.fw. > [ 3248.090194] alloc irq_desc for 28 on node -1 > [ 3248.090197] alloc kstat_irqs on node -1 > [ 3248.090212] ngene 0000:02:00.0: irq 28 for MSI/MSI-X > [ 3248.091778] error in i2c_read_reg > [ 3248.091781] No CXD2099 detected at 40 <---- No dedicated ASIC is a > Sony CXD2099AR > [ 3248.091943] DVB: registering new adapter (nGene) > [ 3248.414997] LNBx2x attached on addr=a > [ 3248.421091] stv6110x_attach: Attaching STV6110x > [ 3248.421095] DVB: registering adapter 0 frontend 0 (STV090x Multistandard)... > [ 3248.422500] LNBx2x attached on addr=8 > [ 3248.422568] stv6110x_attach: Attaching STV6110x > [ 3248.422571] DVB: registering adapter 0 frontend 0 (STV090x Multistandard)... About the module : > ubuntu@ubuntu:~/ngene-test2/v4l$ modinfo ngene > filename: > /lib/modules/2.6.32-21-generic/kernel/drivers/media/dvb/ngene/ngene.ko > license: GPL > author: Micronas, Ralph Metzler, Manfred Voelkel > description: nGene > license: GPL > author: Ralph Metzler <rjkm@xxxxxxxxxxxxxx> > description: cxd2099 > srcversion: AC815F965A079912E969015 > alias: pci:v000018C3d00000720sv00001461sd0000062Ebc*sc*i* > alias: pci:v000018C3d00000720sv000018C3sd0000DD20bc*sc*i* > alias: pci:v000018C3d00000720sv000018C3sd0000DD10bc*sc*i* > alias: pci:v000018C3d00000720sv000018C3sd0000DD00bc*sc*i* > alias: pci:v000018C3d00000720sv000018C3sd0000DB02bc*sc*i* > alias: pci:v000018C3d00000720sv000018C3sd0000DB01bc*sc*i* > alias: pci:v000018C3d00000720sv000018C3sd0000ABC4bc*sc*i* > alias: pci:v000018C3d00000720sv000018C3sd0000ABC3bc*sc*i* > depends: dvb-core > vermagic: 2.6.32-21-generic SMP mod_unload modversions 586 > parm: one_adapter:Use only one adapter. (int) > parm: shutdown_workaround:Activate workaround for shutdown > problem with some chipsets. (int) > parm: debug:Print debugging information. (int) > parm: adapter_nr:DVB adapter numbers (array of short) When I put the option "one_adapter=0" : > sudo modprobe ngene debug=1 one_adapter=0 > [ 6077.066311] ngene 0000:02:00.0: PCI INT A disabled > [ 6101.525377] nGene PCIE bridge driver, Copyright (C) 2005-2007 Micronas > [ 6101.525405] ngene 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > [ 6101.525418] ngene: Found Mystique SaTiX-S2 Dual (v2) > [ 6101.530520] ngene 0000:02:00.0: setting latency timer to 64 > [ 6101.530683] ngene: Device version 1 > [ 6101.530692] ngene 0000:02:00.0: firmware: requesting ngene_18.fw > [ 6101.532043] ngene: Loading firmware file ngene_18.fw. > [ 6101.542919] ngene 0000:02:00.0: irq 28 for MSI/MSI-X > [ 6101.545199] error in i2c_read_reg > [ 6101.545206] No CXD2099 detected at 40 > [ 6101.545374] DVB: registering new adapter (nGene) > [ 6101.844886] LNBx2x attached on addr=a > [ 6101.845092] stv6110x_attach: Attaching STV6110x > [ 6101.845101] DVB: registering adapter 0 frontend 0 (STV090x Multistandard)... > [ 6101.846175] DVB: registering new adapter (nGene) > [ 6101.850023] LNBx2x attached on addr=8 > [ 6101.850231] stv6110x_attach: Attaching STV6110x > [ 6101.850238] DVB: registering adapter 1 frontend 0 (STV090x Multistandard)... > [ 6101.850584] DVB: registering new adapter (nGene) <---- No need to register this > adapter > [ 6101.852948] DVB: registering new adapter (nGene) <---- No need to register this > adapter > [ 6101.855690] DVB: registering new adapter (nGene) <---- No need to register this > adapter You can see that adapter 2, 3 and 4 are registering and the is no need to. > ubuntu@ubuntu:~/ngene-test2/v4l$ ls -l /dev/dvb/adapter* > /dev/dvb/adapter0: > total 0 > crw-rw----+ 1 root video 212, 0 2010-12-26 12:52 demux0 > crw-rw----+ 1 root video 212, 1 2010-12-26 12:52 dvr0 > crw-rw----+ 1 root video 212, 3 2010-12-26 12:52 frontend0 > crw-rw----+ 1 root video 212, 2 2010-12-26 12:52 net0 > > /dev/dvb/adapter1: > total 0 > crw-rw----+ 1 root video 212, 4 2010-12-26 12:52 demux0 > crw-rw----+ 1 root video 212, 5 2010-12-26 12:52 dvr0 > crw-rw----+ 1 root video 212, 7 2010-12-26 12:52 frontend0 > crw-rw----+ 1 root video 212, 6 2010-12-26 12:52 net0 > > /dev/dvb/adapter2: > total 0 > crw-rw----+ 1 root video 212, 8 2010-12-26 12:52 demux0 > crw-rw----+ 1 root video 212, 9 2010-12-26 12:52 dvr0 > crw-rw----+ 1 root video 212, 10 2010-12-26 12:52 net0 > > /dev/dvb/adapter3: > total 0 > crw-rw----+ 1 root video 212, 11 2010-12-26 12:52 demux0 > crw-rw----+ 1 root video 212, 12 2010-12-26 12:52 dvr0 > crw-rw----+ 1 root video 212, 13 2010-12-26 12:52 net0 > > /dev/dvb/adapter4: > total 0 > crw-rw----+ 1 root video 212, 14 2010-12-26 12:52 demux0 > crw-rw----+ 1 root video 212, 15 2010-12-26 12:52 dvr0 > crw-rw----+ 1 root video 212, 16 2010-12-26 12:52 net0 Is the no test to check how many andapters are needed with the card ? I was working with stable driver dans 1.5 firmware. Ludovic, -- Ludovic BOUÉ -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
