Hi I was going through old emails... have you made any progress preparing the patch? Regards! On Fri, 26 Jul 2024 at 07:24, BrettRD <brett@xxxxxxxxxxx> wrote: > > Hi Ricardo, > > On Monday, July 22nd, 2024 at 6:15 PM, Ricardo Ribalda <ribalda@xxxxxxxxxxxx> wrote: > > > > Hi BrettRD > > > > Thanks for your report. > > > > Do you want to give it a try at sending a patch for the device? > > > > It looks something like this: > > https://lore.kernel.org/linux-media/20221101-easycam-v3-1-2c9881a7a4f7@xxxxxxxxxxxx/ > > I'd love to, I'm still reading up on how to build modules under Debian > A first attempt is attached, I'll send it standalone once I've tested it. > > > Make sure the vid:pids are alphabetically ordered. > > Thanks! I wouldn't have noticed that, the struct is inserted in vid:pid order > > > Regards! > > > > On Fri, 19 Jul 2024 at 07:55, BrettRD brett@xxxxxxxxxxx wrote: > > > > > Hello, > > > > > > I have a device not listed among the UVC supported devices, '2bdf:0102 HIK Camera', It's sold as a "mini640" thermal camera. > > > > > > It needs the quirk 'UVC_QUIRK_PROBE_MINMAX' before it runs happily under gstreamer using v4l2src, no errors for all reported resolutions. > > > > > > Attached is the libusb output from it, and the v4l2_compliance report generated without the quirk applied. (with quirk=2 it reports no failures) > > > > > > Thanks for a great driver and documentation > > > Brett > > > > -- > > Ricardo Ribalda > > Cheers, > Brett -- Ricardo Ribalda
