W dniu 09.11.2010 11:53, Mauro Carvalho Chehab pisze: > Em 25-10-2010 15:59, Maciej Szmigiero escreveu: >> + printk(KERN_NOTICE "%s DVB-T demod i2c gate was left" >> + " closed\n", dev->name); >> + printk(KERN_NOTICE "%s previous informational" >> + " EEPROM read might have been" >> + " corrupted\n", dev->name); > > hmm... I don't think we need those debug messages on normal cases. I added this message because when the gate was left closed the eeprom content (printed out unconditionally in saa7134_i2c_eeprom) looks garbled in dmesg, so it's better to inform user that he (or she) shouldn't be worried about this. The eeprom dump is called from saa7134_i2c_register, before card-specific code has opportunity to run. >> saa7134_tuner_setup(dev); >> >> + /* some cards (Medion 7134 for example) needs tuner to be setup */ >> + /* before tda9887 shows itself on i2c bus */ >> + if ((TUNER_ABSENT != dev->tuner_type) >> + && (dev->tda9887_conf & TDA9887_PRESENT)) { >> + v4l2_i2c_new_subdev(&dev->v4l2_dev, >> + &dev->i2c_adap, "tuner", "tuner", >> + 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD)); >> + } >> + >> switch (dev->board) { >> case SAA7134_BOARD_BEHOLD_COLUMBUS_TVFM: >> case SAA7134_BOARD_AVERMEDIA_CARDBUS_501: > > The order change for the demod probe will likely break support for other boards. > If the problem is specific to Medion 7134, what you should do, instead, is to > change the order just for MD7134 (so, inside the switch(dev->board)). It was done in that order (tuner first then tda9887) for a long time before it was changed. For example ( http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=blob;f=drivers/media/video/saa7134/saa7134-core.c;hb=7a766f9ddd74b50d6069f054a3004ece0439f5c1 ) it used to look like that: 942 /* load i2c helpers */ 943 if (TUNER_ABSENT != dev->tuner_type) 944 request_module("tuner"); 945 if (dev->tda9887_conf) 946 request_module("tda9887"); 947 if (card_is_empress(dev)) { 948 request_module("saa6752hs"); 949 request_module_depend("saa7134-empress",&need_empress); 950 } But then the code for tda9887 was integrated into tuner module and later split out again, this time reversing the detection order (by accident I suppose). > Cheers, > Mauro. > Best regards, Maciej Szmigiero -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html