On Mon, Oct 18, 2010 at 11:05 PM, Tugrul Galatali <tugrul@xxxxxxxxxxxx> wrote: > After a variable amount of time recording, the card stops functioning > and starts filling my disk with error messages. It usually starts with > something like this: This happened again after the longest spell of not occurring, about 6.5 days. This time when I removed the cx88_dvb module it stopped the error stream, which previously wouldn't happen until I removed more modules like s5h1409 and lgdt3305. When I tried reloading it, I got: [589132.812877] cx88/2: unregistering cx8802 driver, type: dvb access: shared [589132.812881] cx88[0]/2: subsystem: 11bd:0051, board: Pinnacle PCTV HD 800i [card=58] [589141.517555] cx88/2: cx2388x dvb driver version 0.0.8 loaded [589141.517558] cx88/2: registering cx8802 driver, type: dvb access: shared [589141.517561] cx88[0]/2: subsystem: 11bd:0051, board: Pinnacle PCTV HD 800i [card=58] [589141.517563] cx88[0]/2: cx2388x based DVB/ATSC card [589141.517564] cx8802_alloc_frontends() allocating 1 frontend(s) [589141.518266] s5h1409_readreg: readreg error (ret == -6) [589141.518311] cx88[0]/2: frontend initialization failed [589141.518313] cx88[0]/2: dvb_register failed (err = -22) [589141.518314] cx88[0]/2: cx8802 probe failed, err = -22 This was the beginning of the errors from syslog: [572105.888680] s5h1409_readreg: readreg error (ret == -6) [572105.889326] s5h1409_writereg: error (reg == 0xf5, val == 0x0000, ret == -6) [572105.889989] s5h1409_writereg: error (reg == 0xf5, val == 0x0001, ret == -6) [572105.890632] s5h1409_writereg: error (reg == 0xf4, val == 0x0001, ret == -6) [572105.891273] s5h1409_writereg: error (reg == 0x85, val == 0x0110, ret == -6) [572105.891915] s5h1409_writereg: error (reg == 0xf5, val == 0x0000, ret == -6) [572105.892573] s5h1409_writereg: error (reg == 0xf5, val == 0x0001, ret == -6) [572105.893229] s5h1409_writereg: error (reg == 0xf3, val == 0x0001, ret == -6) [572105.893897] xc5000: I2C read failed [572105.894540] xc5000: I2C read failed [572105.894542] xc5000: waiting for firmware upload (dvb-fe-xc5000-1.6.114.fw)... [572105.969198] xc5000: firmware read 12401 bytes. [572105.969199] xc5000: firmware uploading... [572105.969201] cx88[0]: Calling XC5000 callback [572105.969869] xc5000: I2C write failed (len=3) [572105.969870] xc5000: firmware upload complete... [572105.970516] s5h1409_writereg: error (reg == 0xf3, val == 0x0000, ret == -6) [572105.971158] s5h1409_writereg: error (reg == 0xf5, val == 0x0000, ret == -6) [572105.971800] s5h1409_writereg: error (reg == 0xf5, val == 0x0001, ret == -6) [572105.972454] s5h1409_readreg: readreg error (ret == -6) [572105.973110] s5h1409_writereg: error (reg == 0x96, val == 0x0008, ret == -6) [572105.973774] s5h1409_writereg: error (reg == 0x93, val == 0x3332, ret == -6) [572105.974417] s5h1409_writereg: error (reg == 0x9e, val == 0x2c37, ret == -6) [572105.975058] s5h1409_readreg: readreg error (ret == -6) [572105.975701] s5h1409_writereg: error (reg == 0x96, val == 0x0008, ret == -6) [572105.976355] s5h1409_readreg: readreg error (ret == -6) [572105.977006] s5h1409_writereg: error (reg == 0xab, val == 0x1001, ret == -6) [572106.078183] lgdt3305_read_reg: error (addr 0e reg 0003 error (ret == -5) [572106.078185] lgdt3305_read_status: error -5 on line 819 [572106.080329] tda18271_write_regs: [2-0060|M] ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5 [572106.080331] tda18271_init: [2-0060|M] error -5 on line 830 [572106.080333] tda18271_tune: [2-0060|M] error -5 on line 908 [572106.080335] tda18271_set_params: [2-0060|M] error -5 on line 989 [572106.080336] lgdt3305_set_parameters: error -5 on line 655 [572106.582179] lgdt3305_read_reg: error (addr 0e reg 0003 error (ret == -5) [572106.582182] lgdt3305_read_status: error -5 on line 819 [572106.976682] s5h1409_readreg: readreg error (ret == -6) [572106.977343] s5h1409_writereg: error (reg == 0xf5, val == 0x0000, ret == -6) [572106.977997] s5h1409_writereg: error (reg == 0xf5, val == 0x0001, ret == -6) [572106.978639] s5h1409_writereg: error (reg == 0xf4, val == 0x0001, ret == -6) [572106.979280] s5h1409_writereg: error (reg == 0x85, val == 0x0110, ret == -6) [572106.979923] s5h1409_writereg: error (reg == 0xf5, val == 0x0000, ret == -6) [572106.980593] s5h1409_writereg: error (reg == 0xf5, val == 0x0001, ret == -6) [572106.981256] s5h1409_writereg: error (reg == 0xf3, val == 0x0001, ret == -6) [572106.981898] xc5000: I2C read failed [572106.982540] xc5000: I2C read failed [572106.982542] xc5000: waiting for firmware upload (dvb-fe-xc5000-1.6.114.fw)... [572106.984838] xc5000: firmware read 12401 bytes. [572106.984839] xc5000: firmware uploading... [572106.984841] cx88[0]: Calling XC5000 callback [572106.985544] xc5000: I2C write failed (len=3) [572106.985546] xc5000: firmware upload complete... Tugrul Galatali -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
