Em 25-10-2010 20:06, Florian Klink escreveu: > Hi, > > I'm not very familiar with mailing lists, sorry! > > Patched em28xx-cards.c, but no luck with > mplayer -v -tv driver=v4l2:input=0:device=/dev/video1:forceaudio tv:// > (/dev/video0 is webcam). I'm able to see the video, but still no sound in mplayer > > playing the sound with arecord works (i think it goes over the snd-usb-audio module, > but don't know why some "mplayer -v -tv driver=v4l2:input=0:device=/dev/video1:alsa:adevice=hw.2,0:forceaudio tv://" magic won't do the job. > > And shouldn't the sound go over v4l, too? The sound comes from alsa device. Several em28xx types provide standard USB audio. So, snd-usb-audio handles it. That's why you need alsa:adevice=hw.2,0:forceaudio at mplayer. > > Florian > > > > On Mon, 25 Oct 2010 18:51:15 -0200, Mauro Carvalho Chehab <mchehab@xxxxxxxxxx> wrote: >> Em 25-10-2010 18:24, Florian Klink escreveu: >>> Hi Mauro, >>> >>> thanks for your answer! >> >> I'm c/c the mailing list, as this info may be useful for the others. >> It would be nice to have this added to wiki, but I won't have time for it, >> unfortunately. >>> >>>> Maybe the amux is wrong. The only way to know for sure is to check >>>> the used GPIO's, >>>> via a USB snoop dump. Please take a look at linuxtv.org Wiki (search >>>> for usbsnoop). >>>> After getting the dump, please parse it and send me. >>> >>> I did the usbsnooping and hope I did the parsing right (At least the log >>> file shrinked from 100MB to some KB, and there are plenty of EM28XX >>> strings inside ;-)) >>> >>> You can get it here: http://pastebin.com/SXKfLUny >> >> There are a few things that are relevant: >> >> First of all, GPIO's. They enable/disable parts of the board: >> >> $ grep GPIO /tmp/dump >> em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff); >> em28xx_read_reg(dev, EM28XX_R08_GPIO); /* read 0xff */ >> em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd); >> em28xx_read_reg(dev, EM28XX_R08_GPIO); /* read 0xfd */ >> em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd); >> em28xx_read_reg(dev, EM28XX_R08_GPIO); /* read 0xfd */ >> em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x7d); >> em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x2a); >> em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x2a); >> >> Currently, they're not touched for this device. Perhaps, we might >> need to initialize >> them to 0xfd for capture mode, and 0x2a for sleep mode. >> >> In this specific case, maybe it is just safe to keep it as-is, as I >> suspect that GPIO's >> are not used on this device. I may be wrong, though. A simple test will tell. >> >> The audio entries are related to the ac97 chip. >> >> The driver will basically run this code: >> >> amux = EM28XX_AMUX_VIDEO2; /* from Terratec Grabby entry, at >> em28xx-cards.c */ >> >> static struct em28xx_vol_table inputs[] = { >> { EM28XX_AMUX_VIDEO, AC97_VIDEO_VOL }, >> { EM28XX_AMUX_LINE_IN, AC97_LINEIN_VOL }, >> { EM28XX_AMUX_PHONE, AC97_PHONE_VOL }, >> { EM28XX_AMUX_MIC, AC97_MIC_VOL }, >> { EM28XX_AMUX_CD, AC97_CD_VOL }, >> { EM28XX_AMUX_AUX, AC97_AUX_VOL }, >> { EM28XX_AMUX_PCM_OUT, AC97_PCM_OUT_VOL }, >> >> if (amux == inputs[i].mux) >> ret = em28xx_write_ac97(dev, inputs[i].reg, 0x0808); /* Put the >> volume in 50% */ >> else >> ret = em28xx_write_ac97(dev, inputs[i].reg, 0x8000); /* Mute the >> volume */ >> >> Any mixer entry equal or bigger than 0x8000 is muted. >> >> >> $ grep 97 dump >> em28xx_read_ac97(dev, AC97_VENDOR_ID1); /* read 0x0x8384 */ >> em28xx_read_ac97(dev, AC97_VENDOR_ID2); /* read 0x0x7652 */ >> em28xx_write_ac97(dev, AC97_LINEIN_VOL, 0x0808); >> em28xx_write_ac97(dev, AC97_VIDEO_VOL, 0x9010); >> em28xx_write_ac97(dev, AC97_AUX_VOL, 0x9010); >> em28xx_write_ac97(dev, AC97_MIC_VOL, 0x9010); >> em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x0000); >> em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x0000); >> em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x8000); >> em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x8000); >> em28xx_write_ac97(dev, AC97_POWER_DOWN_CTRL, 0x4200); >> em28xx_write_ac97(dev, AC97_RECORD_SELECT, 0x0505); >> em28xx_write_ac97(dev, AC97_EXT_AUD_CTRL, 0x0031); >> em28xx_write_ac97(dev, AC97_PCM_IN_SRATE, 0xbb80); >> em28xx_write_ac97(dev, AC97_LINEIN_VOL, 0x0808); >> em28xx_write_ac97(dev, AC97_VIDEO_VOL, 0x9010); >> em28xx_write_ac97(dev, AC97_AUX_VOL, 0x9010); >> em28xx_write_ac97(dev, AC97_MIC_VOL, 0x9010); >> em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x8000); >> em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x8000); >> em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x8000); >> em28xx_write_ac97(dev, AC97_LINEIN_VOL, 0x0808); >> em28xx_write_ac97(dev, AC97_VIDEO_VOL, 0x9010); >> em28xx_write_ac97(dev, AC97_AUX_VOL, 0x9010); >> em28xx_write_ac97(dev, AC97_MIC_VOL, 0x9010); >> em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x0000); >> em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x0000); >> em28xx_write_ac97(dev, AC97_LINEIN_VOL, 0x0808); >> em28xx_write_ac97(dev, AC97_VIDEO_VOL, 0x9010); >> em28xx_write_ac97(dev, AC97_AUX_VOL, 0x9010); >> em28xx_write_ac97(dev, AC97_MIC_VOL, 0x9010); >> em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x0000); >> em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x0000); >> em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x8000); >> em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x8000); >> em28xx_write_ac97(dev, AC97_POWER_DOWN_CTRL, 0x4200); >> em28xx_write_ac97(dev, AC97_RECORD_SELECT, 0x0505); >> em28xx_write_ac97(dev, AC97_EXT_AUD_CTRL, 0x0031); >> em28xx_write_ac97(dev, AC97_PCM_IN_SRATE, 0xbb80); >> em28xx_write_ac97(dev, AC97_LINEIN_VOL, 0x0808); >> em28xx_write_ac97(dev, AC97_VIDEO_VOL, 0x9010); >> em28xx_write_ac97(dev, AC97_AUX_VOL, 0x9010); >> em28xx_write_ac97(dev, AC97_MIC_VOL, 0x9010); >> em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x8000); >> em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x8000); >> em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x8000); >> em28xx_write_ac97(dev, AC97_LINEIN_VOL, 0x0808); >> em28xx_write_ac97(dev, AC97_VIDEO_VOL, 0x9010); >> em28xx_write_ac97(dev, AC97_AUX_VOL, 0x9010); >> em28xx_write_ac97(dev, AC97_MIC_VOL, 0x9010); >> em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x0000); >> em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x0000); >> em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x8000); >> em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x8000); >> em28xx_write_ac97(dev, AC97_POWER_DOWN_CTRL, 0x4200); >> em28xx_write_ac97(dev, AC97_RECORD_SELECT, 0x0505); >> em28xx_write_ac97(dev, AC97_EXT_AUD_CTRL, 0x0031); >> em28xx_write_ac97(dev, AC97_PCM_IN_SRATE, 0xbb80); >> em28xx_write_ac97(dev, AC97_LINEIN_VOL, 0x0808); >> em28xx_write_ac97(dev, AC97_VIDEO_VOL, 0x9010); >> em28xx_write_reg(dev, EM28XX_R42_AC97ADDR, 0x16); >> em28xx_write_ac97(dev, AC97_MIC_VOL, 0x9010); >> em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x8000); >> em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x8000); >> em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x8000); >> em28xx_write_ac97(dev, AC97_LINEIN_VOL, 0x0808); >> em28xx_write_ac97(dev, AC97_VIDEO_VOL, 0x9010); >> em28xx_write_ac97(dev, AC97_AUX_VOL, 0x9010); >> em28xx_write_ac97(dev, AC97_MIC_VOL, 0x9010); >> em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x0000); >> em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x0000); >> em28xx_write_ac97(dev, AC97_LINEIN_VOL, 0x0808); >> em28xx_write_ac97(dev, AC97_VIDEO_VOL, 0x9010); >> em28xx_write_ac97(dev, AC97_AUX_VOL, 0x9010); >> em28xx_write_ac97(dev, AC97_MIC_VOL, 0x9010); >> em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x0000); >> em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x0000); >> em28xx_write_ac97(dev, AC97_LINEIN_VOL, 0x0808); >> em28xx_write_ac97(dev, AC97_VIDEO_VOL, 0x9010); >> em28xx_write_ac97(dev, AC97_AUX_VOL, 0x9010); >> em28xx_write_ac97(dev, AC97_MIC_VOL, 0x9010); >> em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x0000); >> em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x0000); >> em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x8000); >> em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x8000); >> em28xx_write_ac97(dev, AC97_POWER_DOWN_CTRL, 0x4200); >> em28xx_write_ac97(dev, AC97_RECORD_SELECT, 0x0505); >> em28xx_write_ac97(dev, AC97_EXT_AUD_CTRL, 0x0031); >> em28xx_write_ac97(dev, AC97_PCM_IN_SRATE, 0xbb80); >> em28xx_write_ac97(dev, AC97_LINEIN_VOL, 0x0808); >> em28xx_write_ac97(dev, AC97_VIDEO_VOL, 0x9010); >> em28xx_write_ac97(dev, AC97_AUX_VOL, 0x9010); >> em28xx_write_ac97(dev, AC97_MIC_VOL, 0x9010); >> em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x8000); >> em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x8000); >> em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x8000); >> em28xx_write_ac97(dev, AC97_LINEIN_VOL, 0x0808); >> em28xx_write_ac97(dev, AC97_VIDEO_VOL, 0x9010); >> em28xx_write_ac97(dev, AC97_AUX_VOL, 0x9010); >> em28xx_write_ac97(dev, AC97_MIC_VOL, 0x9010); >> em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x0000); >> em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x0000); >> em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x8000); >> em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x8000); >> em28xx_write_ac97(dev, AC97_POWER_DOWN_CTRL, 0x4200); >> em28xx_write_ac97(dev, AC97_RECORD_SELECT, 0x0505); >> em28xx_write_ac97(dev, AC97_EXT_AUD_CTRL, 0x0031); >> em28xx_write_ac97(dev, AC97_PCM_IN_SRATE, 0xbb80); >> em28xx_write_ac97(dev, AC97_LINEIN_VOL, 0x0808); >> em28xx_write_ac97(dev, AC97_VIDEO_VOL, 0x9010); >> em28xx_write_ac97(dev, AC97_AUX_VOL, 0x9010); >> em28xx_write_ac97(dev, AC97_MIC_VOL, 0x9010); >> em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x8000); >> em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x8000); >> em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x8000); >> em28xx_write_ac97(dev, AC97_LINEIN_VOL, 0x0808); >> em28xx_write_ac97(dev, AC97_VIDEO_VOL, 0x9010); >> em28xx_write_ac97(dev, AC97_AUX_VOL, 0x9010); >> em28xx_write_ac97(dev, AC97_MIC_VOL, 0x9010); >> em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x0000); >> em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x0000); >> em28xx_write_ac97(dev, AC97_LINEIN_VOL, 0x0808); >> em28xx_write_ac97(dev, AC97_VIDEO_VOL, 0x9010); >> em28xx_write_ac97(dev, AC97_AUX_VOL, 0x9010); >> em28xx_write_ac97(dev, AC97_MIC_VOL, 0x9010); >> em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x0000); >> em28xx_write_ac97(dev, AC97_RECORD_GAIN, 0x0000); >> em28xx_write_ac97(dev, AC97_LINEIN_VOL, 0x0808); >> em28xx_write_ac97(dev, AC97_VIDEO_VOL, 0x9010); >> em28xx_write_ac97(dev, AC97_AUX_VOL, 0x9010); >> em28xx_write_ac97(dev, AC97_MIC_VOL, 0x9010); >> >> From the logs, the only mixer line used on this device is: >> em28xx_write_ac97(dev, AC97_LINEIN_VOL, 0x0808); >> >> So, I think that the correct value, at em28xx-cards.c is: >> amux = EM28XX_AMUX_LINE_IN, >> >> Ok, could you please test the enclosed patch? Please test it with both >> Composite and S-Video entries. >> >> Cheers, >> Mauro >> >> --- >> >> em28xx: fix Terratec Grabby lack of sound >> >> Audio mux were pointing to the wrong line entry. >> >> Reported-by: Florian Klink <flokli@xxxxxxxxx> >> >> diff --git a/drivers/media/video/em28xx/em28xx-cards.c >> b/drivers/media/video/em28xx/em28xx-cards.c >> index 5485923..afb206b 100644 >> --- a/drivers/media/video/em28xx/em28xx-cards.c >> +++ b/drivers/media/video/em28xx/em28xx-cards.c >> @@ -1633,11 +1633,11 @@ struct em28xx_board em28xx_boards[] = { >> .input = { { >> .type = EM28XX_VMUX_COMPOSITE1, >> .vmux = SAA7115_COMPOSITE0, >> - .amux = EM28XX_AMUX_VIDEO2, >> + .amux = EM28XX_AMUX_LINE_IN, >> }, { >> .type = EM28XX_VMUX_SVIDEO, >> .vmux = SAA7115_SVIDEO3, >> - .amux = EM28XX_AMUX_VIDEO2, >> + .amux = EM28XX_AMUX_LINE_IN, >> } }, >> }, >> [EM2860_BOARD_TERRATEC_AV350] = { >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-media" in >> the body of a message to majordomo@xxxxxxxxxxxxxxx >> More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
