Hi Reka,
On 14/08/2023 06:29, Reka Norman wrote:
> Update the cec_dmi_match_table to allow specifying multiple HDMI
> connectors for each device.
>
> Signed-off-by: Reka Norman <rekanorman@xxxxxxxxxxxx>
> ---
>
> .../media/cec/platform/cros-ec/cros-ec-cec.c | 47 +++++++++++--------
> 1 file changed, 28 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/media/cec/platform/cros-ec/cros-ec-cec.c b/drivers/media/cec/platform/cros-ec/cros-ec-cec.c
> index c68ed5d4bda0..f2f397d9a6d8 100644
> --- a/drivers/media/cec/platform/cros-ec/cros-ec-cec.c
> +++ b/drivers/media/cec/platform/cros-ec/cros-ec-cec.c
> @@ -284,38 +284,41 @@ static SIMPLE_DEV_PM_OPS(cros_ec_cec_pm_ops,
> #if IS_ENABLED(CONFIG_PCI) && IS_ENABLED(CONFIG_DMI)
>
> /*
> - * The Firmware only handles a single CEC interface tied to a single HDMI
> - * connector we specify along with the DRM device name handling the HDMI output
> + * Specify the DRM device name handling the HDMI output and the HDMI connector
> + * corresponding to each CEC port. The order of connectors must match the order
> + * in the EC (first connector is EC port 0, ...), and the number of connectors
> + * must match the number of ports in the EC (which can be queried using the
> + * EC_CMD_CEC_PORT_COUNT host command).
> */
>
> struct cec_dmi_match {
> const char *sys_vendor;
> const char *product_name;
> const char *devname;
> - const char *conn;
> + const char *conns[EC_CEC_MAX_PORTS];
Since EC_CEC_MAX_PORTS is 16, this will waste a lot of space here.
I would suggest creating a separate define (CEC_MAX_PORTS?) that is set
to 2 and is the max port that is actually used.
When you get the actual number of ports from the EC you can check if
CEC_MAX_PORTS isn't too small and return an error if it is.
You can use CEC_MAX_PORTS here and in the ports array of struct cros_ec_cec.
Regards,
Hans
> };
>
> static const struct cec_dmi_match cec_dmi_match_table[] = {
> /* Google Fizz */
> - { "Google", "Fizz", "0000:00:02.0", "Port B" },
> + { "Google", "Fizz", "0000:00:02.0", { "Port B" } },
> /* Google Brask */
> - { "Google", "Brask", "0000:00:02.0", "Port B" },
> + { "Google", "Brask", "0000:00:02.0", { "Port B" } },
> /* Google Moli */
> - { "Google", "Moli", "0000:00:02.0", "Port B" },
> + { "Google", "Moli", "0000:00:02.0", { "Port B" } },
> /* Google Kinox */
> - { "Google", "Kinox", "0000:00:02.0", "Port B" },
> + { "Google", "Kinox", "0000:00:02.0", { "Port B" } },
> /* Google Kuldax */
> - { "Google", "Kuldax", "0000:00:02.0", "Port B" },
> + { "Google", "Kuldax", "0000:00:02.0", { "Port B" } },
> /* Google Aurash */
> - { "Google", "Aurash", "0000:00:02.0", "Port B" },
> + { "Google", "Aurash", "0000:00:02.0", { "Port B" } },
> /* Google Gladios */
> - { "Google", "Gladios", "0000:00:02.0", "Port B" },
> + { "Google", "Gladios", "0000:00:02.0", { "Port B" } },
> /* Google Lisbon */
> - { "Google", "Lisbon", "0000:00:02.0", "Port B" },
> + { "Google", "Lisbon", "0000:00:02.0", { "Port B" } },
> };
>
> static struct device *cros_ec_cec_find_hdmi_dev(struct device *dev,
> - const char **conn)
> + const char * const **conns)
> {
> int i;
>
> @@ -332,7 +335,7 @@ static struct device *cros_ec_cec_find_hdmi_dev(struct device *dev,
> if (!d)
> return ERR_PTR(-EPROBE_DEFER);
> put_device(d);
> - *conn = m->conn;
> + *conns = m->conns;
> return d;
> }
> }
> @@ -346,7 +349,7 @@ static struct device *cros_ec_cec_find_hdmi_dev(struct device *dev,
> #else
>
> static struct device *cros_ec_cec_find_hdmi_dev(struct device *dev,
> - const char **conn)
> + const char * const **conns)
> {
> return ERR_PTR(-ENODEV);
> }
> @@ -388,7 +391,7 @@ static int cros_ec_cec_get_write_cmd_version(struct cros_ec_cec *cros_ec_cec)
> static int cros_ec_cec_init_port(struct device *dev,
> struct cros_ec_cec *cros_ec_cec,
> int port_num, struct device *hdmi_dev,
> - const char *conn)
> + const char * const *conns)
> {
> struct cros_ec_cec_port *port;
> int ret;
> @@ -406,7 +409,13 @@ static int cros_ec_cec_init_port(struct device *dev,
> if (IS_ERR(port->adap))
> return PTR_ERR(port->adap);
>
> - port->notify = cec_notifier_cec_adap_register(hdmi_dev, conn,
> + if (!conns[port_num]) {
> + dev_err(dev, "no conn for port %d\n", port_num);
> + ret = -ENODEV;
> + goto out_probe_adapter;
> + }
> +
> + port->notify = cec_notifier_cec_adap_register(hdmi_dev, conns[port_num],
> port->adap);
> if (!port->notify) {
> ret = -ENOMEM;
> @@ -435,10 +444,10 @@ static int cros_ec_cec_probe(struct platform_device *pdev)
> struct cros_ec_cec *cros_ec_cec;
> struct cros_ec_cec_port *port;
> struct device *hdmi_dev;
> - const char *conn = NULL;
> + const char * const *conns = NULL;
> int ret;
>
> - hdmi_dev = cros_ec_cec_find_hdmi_dev(&pdev->dev, &conn);
> + hdmi_dev = cros_ec_cec_find_hdmi_dev(&pdev->dev, &conns);
> if (IS_ERR(hdmi_dev))
> return PTR_ERR(hdmi_dev);
>
> @@ -460,7 +469,7 @@ static int cros_ec_cec_probe(struct platform_device *pdev)
>
> for (int i = 0; i < cros_ec_cec->num_ports; i++) {
> ret = cros_ec_cec_init_port(&pdev->dev, cros_ec_cec, i,
> - hdmi_dev, conn);
> + hdmi_dev, conns);
> if (ret)
> goto unregister_ports;
> }
