On Mon, Aug 21, 2023 at 2:12 AM Hans Verkuil <hverkuil-cisco@xxxxxxxxx> wrote:
>
> Hi Reka,
>
> On 14/08/2023 06:29, Reka Norman wrote:
> > Update the cec_dmi_match_table to allow specifying multiple HDMI
> > connectors for each device.
> >
> > Signed-off-by: Reka Norman <rekanorman@xxxxxxxxxxxx>
> > ---
> >
> > .../media/cec/platform/cros-ec/cros-ec-cec.c | 47 +++++++++++--------
> > 1 file changed, 28 insertions(+), 19 deletions(-)
> >
> > diff --git a/drivers/media/cec/platform/cros-ec/cros-ec-cec.c b/drivers/media/cec/platform/cros-ec/cros-ec-cec.c
> > index c68ed5d4bda0..f2f397d9a6d8 100644
> > --- a/drivers/media/cec/platform/cros-ec/cros-ec-cec.c
> > +++ b/drivers/media/cec/platform/cros-ec/cros-ec-cec.c
> > @@ -284,38 +284,41 @@ static SIMPLE_DEV_PM_OPS(cros_ec_cec_pm_ops,
> > #if IS_ENABLED(CONFIG_PCI) && IS_ENABLED(CONFIG_DMI)
> >
> > /*
> > - * The Firmware only handles a single CEC interface tied to a single HDMI
> > - * connector we specify along with the DRM device name handling the HDMI output
> > + * Specify the DRM device name handling the HDMI output and the HDMI connector
> > + * corresponding to each CEC port. The order of connectors must match the order
> > + * in the EC (first connector is EC port 0, ...), and the number of connectors
> > + * must match the number of ports in the EC (which can be queried using the
> > + * EC_CMD_CEC_PORT_COUNT host command).
> > */
> >
> > struct cec_dmi_match {
> > const char *sys_vendor;
> > const char *product_name;
> > const char *devname;
> > - const char *conn;
> > + const char *conns[EC_CEC_MAX_PORTS];
>
> Since EC_CEC_MAX_PORTS is 16, this will waste a lot of space here.
>
> I would suggest creating a separate define (CEC_MAX_PORTS?) that is set
> to 2 and is the max port that is actually used.
>
Possibly it could also be declared as const char * const ** and be
terminated with NULL (though that would require {{ "Port B", NULL } in
the declarations). Not sure which one is better.
Guenter
> When you get the actual number of ports from the EC you can check if
> CEC_MAX_PORTS isn't too small and return an error if it is.
>
> You can use CEC_MAX_PORTS here and in the ports array of struct cros_ec_cec.
>
> Regards,
>
> Hans
>
> > };
> >
> > static const struct cec_dmi_match cec_dmi_match_table[] = {
> > /* Google Fizz */
> > - { "Google", "Fizz", "0000:00:02.0", "Port B" },
> > + { "Google", "Fizz", "0000:00:02.0", { "Port B" } },
> > /* Google Brask */
> > - { "Google", "Brask", "0000:00:02.0", "Port B" },
> > + { "Google", "Brask", "0000:00:02.0", { "Port B" } },
> > /* Google Moli */
> > - { "Google", "Moli", "0000:00:02.0", "Port B" },
> > + { "Google", "Moli", "0000:00:02.0", { "Port B" } },
> > /* Google Kinox */
> > - { "Google", "Kinox", "0000:00:02.0", "Port B" },
> > + { "Google", "Kinox", "0000:00:02.0", { "Port B" } },
> > /* Google Kuldax */
> > - { "Google", "Kuldax", "0000:00:02.0", "Port B" },
> > + { "Google", "Kuldax", "0000:00:02.0", { "Port B" } },
> > /* Google Aurash */
> > - { "Google", "Aurash", "0000:00:02.0", "Port B" },
> > + { "Google", "Aurash", "0000:00:02.0", { "Port B" } },
> > /* Google Gladios */
> > - { "Google", "Gladios", "0000:00:02.0", "Port B" },
> > + { "Google", "Gladios", "0000:00:02.0", { "Port B" } },
> > /* Google Lisbon */
> > - { "Google", "Lisbon", "0000:00:02.0", "Port B" },
> > + { "Google", "Lisbon", "0000:00:02.0", { "Port B" } },
> > };
> >
> > static struct device *cros_ec_cec_find_hdmi_dev(struct device *dev,
> > - const char **conn)
> > + const char * const **conns)
> > {
> > int i;
> >
> > @@ -332,7 +335,7 @@ static struct device *cros_ec_cec_find_hdmi_dev(struct device *dev,
> > if (!d)
> > return ERR_PTR(-EPROBE_DEFER);
> > put_device(d);
> > - *conn = m->conn;
> > + *conns = m->conns;
> > return d;
> > }
> > }
> > @@ -346,7 +349,7 @@ static struct device *cros_ec_cec_find_hdmi_dev(struct device *dev,
> > #else
> >
> > static struct device *cros_ec_cec_find_hdmi_dev(struct device *dev,
> > - const char **conn)
> > + const char * const **conns)
> > {
> > return ERR_PTR(-ENODEV);
> > }
> > @@ -388,7 +391,7 @@ static int cros_ec_cec_get_write_cmd_version(struct cros_ec_cec *cros_ec_cec)
> > static int cros_ec_cec_init_port(struct device *dev,
> > struct cros_ec_cec *cros_ec_cec,
> > int port_num, struct device *hdmi_dev,
> > - const char *conn)
> > + const char * const *conns)
> > {
> > struct cros_ec_cec_port *port;
> > int ret;
> > @@ -406,7 +409,13 @@ static int cros_ec_cec_init_port(struct device *dev,
> > if (IS_ERR(port->adap))
> > return PTR_ERR(port->adap);
> >
> > - port->notify = cec_notifier_cec_adap_register(hdmi_dev, conn,
> > + if (!conns[port_num]) {
> > + dev_err(dev, "no conn for port %d\n", port_num);
> > + ret = -ENODEV;
> > + goto out_probe_adapter;
> > + }
> > +
> > + port->notify = cec_notifier_cec_adap_register(hdmi_dev, conns[port_num],
> > port->adap);
> > if (!port->notify) {
> > ret = -ENOMEM;
> > @@ -435,10 +444,10 @@ static int cros_ec_cec_probe(struct platform_device *pdev)
> > struct cros_ec_cec *cros_ec_cec;
> > struct cros_ec_cec_port *port;
> > struct device *hdmi_dev;
> > - const char *conn = NULL;
> > + const char * const *conns = NULL;
> > int ret;
> >
> > - hdmi_dev = cros_ec_cec_find_hdmi_dev(&pdev->dev, &conn);
> > + hdmi_dev = cros_ec_cec_find_hdmi_dev(&pdev->dev, &conns);
> > if (IS_ERR(hdmi_dev))
> > return PTR_ERR(hdmi_dev);
> >
> > @@ -460,7 +469,7 @@ static int cros_ec_cec_probe(struct platform_device *pdev)
> >
> > for (int i = 0; i < cros_ec_cec->num_ports; i++) {
> > ret = cros_ec_cec_init_port(&pdev->dev, cros_ec_cec, i,
> > - hdmi_dev, conn);
> > + hdmi_dev, conns);
> > if (ret)
> > goto unregister_ports;
> > }
>
