Leadtek WinFast DTV2000DS remote is not supported at all. Leadtek
WinFast DTV Dongle Gold remote is. If you can compile and install latest
drivers from http://git.linuxtv.org/anttip/media_tree.git af9015 tree I
can add support for that remote rather easily.
Antti
On 09/15/2010 10:45 AM, Gregory Orange wrote:
Shall I assume that noone has had any experience with one of these
devices? From some input from other sources, I'm now not sure if I
lack a kernel module, or perhaps the firmware for this device isn't
supported (or somesuch - a bit confused on that).
In any case, pretty well everything is now working including EIT at
last. The remote is all I lack. I have no idea who else to ask or what
to try, so I may try borrowing a different remote. I'm all Googled out
(:
Regards,
Greg.
On 9 September 2010 22:11, Gregory Orange<gregory.orange@xxxxxxxxx> wrote:
Hi all, first post.
I have a newly purchased Leadtek DTV2000DS dual tuner card in my
machine, configured and running in Mythbuntu 10.04 (after installing
latest v4l-dvb from source). I am having a bit of trouble getting the
supplied remote control working. Is anyone here able to assist? I
asked on the LIRC sf.net list and after a bit of back and forth I was
directed to see if you guys can help me. In particular I wonder if the
author of dvb_usb_af9015 and af9013 is around - hmm, seems to be Antti
Palosaari, who seems to be a fairly recent poster. Don't get me wrong
though - anyone who can assist would be great (:
I have confirmed that the hardware works - I installed the drivers in
a Windows boot, and the remote works.
In terms of driver support I'm not sure exactly what I'm looking for,
but there is this line in dmesg:
[ 22.263721] input: IR-receiver inside an USB DVB receiver as
/devices/pci0000:00/0000:00:0e.0/0000:02:0a.2/usb2/2-1/input/input5
cat /proc/bus/input/devices yields
I: Bus=0003 Vendor=0413 Product=6a04 Version=0200
N: Name="IR-receiver inside an USB DVB receiver"
P: Phys=usb-0000:02:0a.2-1/ir0
S: Sysfs=/devices/pci0000:00/0000:00:0e.0/0000:02:0a.2/usb2/2-1/input/input5
U: Uniq=
H: Handlers=kbd event5
B: EV=3
B: KEY=108fc310 2802891 0 0 0 0 118000 200180 4803 e1680 0 100000 ffe
So I've been using /dev/input/event5 in my tests. I have tried using
evtest, mode2, and irw to no avail. I get no indication of any signal
coming from the remote. Am I missing a kernel driver module? Any
further advice or specific experience with this device would be
gratefully welcomed.
Cheers,
Greg.
--
Gregory Orange
--
http://palosaari.fi/
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
