Re: Leadtek DTV2000DS remote

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Shall I assume that noone has had any experience with one of these
devices? From some input from other sources, I'm now not sure if I
lack a kernel module, or perhaps the firmware for this device isn't
supported (or somesuch - a bit confused on that).

In any case, pretty well everything is now working including EIT at
last. The remote is all I lack. I have no idea who else to ask or what
to try, so I may try borrowing a different remote. I'm all Googled out
(:

Regards,
Greg.

On 9 September 2010 22:11, Gregory Orange <gregory.orange@xxxxxxxxx> wrote:
> Hi all, first post.
>
> I have a newly purchased Leadtek DTV2000DS dual tuner card in my
> machine, configured and running in Mythbuntu 10.04 (after installing
> latest v4l-dvb from source). I am having a bit of trouble getting the
> supplied remote control working. Is anyone here able to assist? I
> asked on the LIRC sf.net list and after a bit of back and forth I was
> directed to see if you guys can help me. In particular I wonder if the
> author of dvb_usb_af9015 and af9013 is around - hmm, seems to be Antti
> Palosaari, who seems to be a fairly recent poster. Don't get me wrong
> though - anyone who can assist would be great (:
>
> I have confirmed that the hardware works - I installed the drivers in
> a Windows boot, and the remote works.
>
> In terms of driver support I'm not sure exactly what I'm looking for,
> but there is this line in dmesg:
> [   22.263721] input: IR-receiver inside an USB DVB receiver as
> /devices/pci0000:00/0000:00:0e.0/0000:02:0a.2/usb2/2-1/input/input5
>
> cat /proc/bus/input/devices yields
> I: Bus=0003 Vendor=0413 Product=6a04 Version=0200
> N: Name="IR-receiver inside an USB DVB receiver"
> P: Phys=usb-0000:02:0a.2-1/ir0
> S: Sysfs=/devices/pci0000:00/0000:00:0e.0/0000:02:0a.2/usb2/2-1/input/input5
> U: Uniq=
> H: Handlers=kbd event5
> B: EV=3
> B: KEY=108fc310 2802891 0 0 0 0 118000 200180 4803 e1680 0 100000 ffe
>
> So I've been using /dev/input/event5 in my tests. I have tried using
> evtest, mode2, and irw to no avail. I get no indication of any signal
> coming from the remote. Am I missing a kernel driver module? Any
> further advice or specific experience with this device would be
> gratefully welcomed.
>
> Cheers,
> Greg.
>
> --
> Gregory Orange
>



-- 
Gregory Orange
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux