Re: [PATCH v5 6/6] arm64: dts: qcom: qrb5165-rb5-vision-mezzanine: Add vision mezzanine

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 12/11/2022 18:26, Bryan O'Donoghue wrote:
The Vision Mezzanine for the RB5 ships with an imx517 and ov9282 populated.
Other sensors and components may be added or stacked with additional
mezzanines.

Enable the IMX577 on the vision mezzanine.

An example media-ctl pipeline for the imx577 is:

media-ctl --reset
media-ctl -v -d /dev/media0 -V '"imx577 '22-001a'":0[fmt:SRGGB10/4056x3040 field:none]'
media-ctl -V '"msm_csiphy2":0[fmt:SRGGB10/4056x3040]'
media-ctl -V '"msm_csid0":0[fmt:SRGGB10/4056x3040]'
media-ctl -V '"msm_vfe0_rdi0":0[fmt:SRGGB10/4056x3040]'
media-ctl -l '"msm_csiphy2":1->"msm_csid0":0[1]'
media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]'

yavta -B capture-mplane -c -I -n 5 -f SRGGB10P -s 4056x3040 -F /dev/video0

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
---
  arch/arm64/boot/dts/qcom/Makefile             |  1 +
  .../dts/qcom/qrb5165-rb5-vision-mezzanine.dts | 63 +++++++++++++++++++
  arch/arm64/boot/dts/qcom/sm8250.dtsi          | 33 ++++++++++
  3 files changed, 97 insertions(+)
  create mode 100644 arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dts

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 70ce09bc63a33..5eadd251a0a16 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -54,6 +54,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-sony-xperia-yoshino-poplar.dtb
  dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-1000.dtb
  dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-4000.dtb
  dtb-$(CONFIG_ARCH_QCOM)	+= qrb5165-rb5.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qrb5165-rb5-vision-mezzanine.dtb
  dtb-$(CONFIG_ARCH_QCOM)	+= sa8155p-adp.dtb
  dtb-$(CONFIG_ARCH_QCOM)	+= sa8295p-adp.dtb
  dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-idp.dtb
diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dts
new file mode 100644
index 0000000000000..315d524045cf3
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dts
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include "qrb5165-rb5.dts"
+
+&camss {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l5a_0p88>;
+	vdda-pll-supply = <&vreg_l9a_1p2>;
+
+	ports {
+		/* The port index denotes CSIPHY id i.e. csiphy2 */
+		port@2 {
+			reg = <2>;
+			csiphy2_ep: endpoint {
+				clock-lanes = <7>;
+				data-lanes = <0 1 2 3>;
+				remote-endpoint = <&imx577_ep>;
+			};
+		};
+	};
+};
+
+&camcc {
+	status = "okay";
+};
camcc goes before camss alphabetically. Though I see no reason why a clock controller would be disabled, even if the clocks sit unused.

Konrad
+
+&cci1 {
+	status = "okay";
+};
+
+&cci1_i2c0 {
+	camera@1a {
+		compatible = "sony,imx577";
+		reg = <0x1a>;
+
+		reset-gpios = <&tlmm 78 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default", "suspend";
+		pinctrl-0 = <&cam2_default>;
+		pinctrl-1 = <&cam2_suspend>;
+
+		clocks = <&camcc CAM_CC_MCLK2_CLK>;
+		assigned-clocks = <&camcc CAM_CC_MCLK2_CLK>;
+		assigned-clock-rates = <24000000>;
+
+		dovdd-supply  = <&vreg_l7f_1p8>;
+		avdd-supply = <&vdc_5v>;
+		dvdd-supply = <&vdc_5v>;
+
+		port {
+			imx577_ep: endpoint {
+				clock-lanes = <1>;
+				link-frequencies = /bits/ 64 <600000000>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&csiphy2_ep>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index f28a8893d00d7..83604b9772766 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -3798,6 +3798,39 @@ tlmm: pinctrl@f100000 {
  			gpio-ranges = <&tlmm 0 0 181>;
  			wakeup-parent = <&pdc>;
+ cam2_default: cam2-default-state {
+				rst-pins {
+					pins = "gpio78";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				mclk-pins {
+					pins = "gpio96";
+					function = "cam_mclk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+			};
+
+			cam2_suspend: cam2-suspend-state {
+				rst-pins {
+					pins = "gpio78";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+					output-low;
+				};
+
+				mclk-pins {
+					pins = "gpio96";
+					function = "cam_mclk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
  			cci0_default: cci0-default-state {
  				cci0_i2c0_default: cci0-i2c0-default-pins {
  					/* SDA, SCL */



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux