Re: [PATCH v5 6/6] arm64: dts: qcom: qrb5165-rb5-vision-mezzanine: Add vision mezzanine

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 12/11/2022 21:45, Laurent Pinchart wrote:
Hi Bryan,

Thank you for the patch.

On Sat, Nov 12, 2022 at 05:26:50PM +0000, Bryan O'Donoghue wrote:
The Vision Mezzanine for the RB5 ships with an imx517 and ov9282 populated.

Did you mean imx577 ?

Yes 1 looks like 7 in my defence


Other sensors and components may be added or stacked with additional
mezzanines.

Enable the IMX577 on the vision mezzanine.

Is there a particular reason the ov9282 isn't described ?

ov9282 is WIP.

https://git.linaro.org/people/bryan.odonoghue/kernel.git/log/?h=next-20221013-sm8250-camss-vc

Its too much detail for here but, i2c works, no data is delivered on the CSI bus - I suspect the upstream init sequence isn't a match for my board.

I'm aiming to unblock just the imx577 for rb5.

An example media-ctl pipeline for the imx577 is:

media-ctl --reset
media-ctl -v -d /dev/media0 -V '"imx577 '22-001a'":0[fmt:SRGGB10/4056x3040 field:none]'
media-ctl -V '"msm_csiphy2":0[fmt:SRGGB10/4056x3040]'
media-ctl -V '"msm_csid0":0[fmt:SRGGB10/4056x3040]'
media-ctl -V '"msm_vfe0_rdi0":0[fmt:SRGGB10/4056x3040]'
media-ctl -l '"msm_csiphy2":1->"msm_csid0":0[1]'
media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]'

yavta -B capture-mplane -c -I -n 5 -f SRGGB10P -s 4056x3040 -F /dev/video0

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
---
  arch/arm64/boot/dts/qcom/Makefile             |  1 +
  .../dts/qcom/qrb5165-rb5-vision-mezzanine.dts | 63 +++++++++++++++++++
  arch/arm64/boot/dts/qcom/sm8250.dtsi          | 33 ++++++++++
  3 files changed, 97 insertions(+)
  create mode 100644 arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dts

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 70ce09bc63a33..5eadd251a0a16 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -54,6 +54,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-sony-xperia-yoshino-poplar.dtb
  dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-1000.dtb
  dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-4000.dtb
  dtb-$(CONFIG_ARCH_QCOM)	+= qrb5165-rb5.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qrb5165-rb5-vision-mezzanine.dtb
  dtb-$(CONFIG_ARCH_QCOM)	+= sa8155p-adp.dtb
  dtb-$(CONFIG_ARCH_QCOM)	+= sa8295p-adp.dtb
  dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-idp.dtb
diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dts
new file mode 100644
index 0000000000000..315d524045cf3
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dts
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Linaro Ltd.
+ */
+
+/dts-v1/;

Could this be an overlay ?

Could be. Its a nice idea. I'll look into it separately.

I think it will probably mean chainloading to grub, u-boot or a ramdisk though..

+ cam2_default: cam2-default-state {
+				rst-pins {
+					pins = "gpio78";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				mclk-pins {
+					pins = "gpio96";
+					function = "cam_mclk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+			};

This seems board-specific, shouldn't it go to the mezzanine .dts ?

Fair comment, originally that's where I had them

https://git.linaro.org/people/bryan.odonoghue/kernel.git/commit/?h=linux-next-18-05-22%2bimx577-rb5&id=cd394110d80a23292e84deced50f607ff81344e9

These specific pins are dedicated though

https://lore.kernel.org/all/33abcc93-13f1-d6f5-36a3-6ab796f124f9@xxxxxxxxxx/

---
bod



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux