>>> Vaibhav, > >>> Could you also list DM365 here? This was somehow missed. > >I believe you are referring to > >Instruments:- DM6446, DM365 & DM355 yes. Thanks. > >Submitting this patch alone with this change. > >Thanks, >Vaibhav > >>- To compile this driver as a module, choose M here: the >>- module will be called vpfe-capture. >>- >>-config VIDEO_DM6446_CCDC >>- tristate "DM6446 CCDC HW module" >>- depends on ARCH_DAVINCI_DM644x && VIDEO_VPFE_CAPTURE >>- select VIDEO_VPSS_SYSTEM >>- default y >>- help >>- Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces >>- with decoder modules such as TVP5146 over BT656 or >>- sensor module such as MT9T001 over a raw interface. This >>- module configures the interface and CCDC/ISIF to do >>- video frame capture from slave decoders. >>- >>- To compile this driver as a module, choose M here: the >>- module will be called vpfe. >>- >>-config VIDEO_DM355_CCDC >>- tristate "DM355 CCDC HW module" >>- depends on ARCH_DAVINCI_DM355 && VIDEO_VPFE_CAPTURE >>- select VIDEO_VPSS_SYSTEM >>- default y >>- help >>- Enables DM355 CCD hw module. DM355 CCDC hw interfaces >>- with decoder modules such as TVP5146 over BT656 or >>- sensor module such as MT9T001 over a raw interface. This >>- module configures the interface and CCDC/ISIF to do >>- video frame capture from a slave decoders >>- >>- To compile this driver as a module, choose M here: the >>- module will be called vpfe. >>- >>-config VIDEO_ISIF >>- tristate "ISIF HW module" >>- depends on ARCH_DAVINCI_DM365 && VIDEO_VPFE_CAPTURE >>- select VIDEO_VPSS_SYSTEM >>- default y >>- help >>- Enables ISIF hw module. This is the hardware module for >>- configuring ISIF in VPFE to capture Raw Bayer RGB data from >>- a image sensor or YUV data from a YUV source. >>- >>- To compile this driver as a module, choose M here: the >>- module will be called vpfe. >>+source "drivers/media/video/davinci/Kconfig" >> >> source "drivers/media/video/omap/Kconfig" >> >>diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile >>index cc93859..aa1ea2f 100644 >>--- a/drivers/media/video/Makefile >>+++ b/drivers/media/video/Makefile >>@@ -177,7 +177,7 @@ obj-$(CONFIG_VIDEO_SAA7164) += saa7164/ >> >> obj-$(CONFIG_VIDEO_IR_I2C) += ir-kbd-i2c.o >> >>-obj-$(CONFIG_ARCH_DAVINCI) += davinci/ >>+obj-y += davinci/ >> >> obj-$(CONFIG_ARCH_OMAP) += omap/ >> >>diff --git a/drivers/media/video/davinci/Kconfig >>b/drivers/media/video/davinci/Kconfig >>new file mode 100644 >>index 0000000..97f889d >>--- /dev/null >>+++ b/drivers/media/video/davinci/Kconfig >>@@ -0,0 +1,93 @@ >>+config DISPLAY_DAVINCI_DM646X_EVM >>+ tristate "DM646x EVM Video Display" >>+ depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM >>+ select VIDEOBUF_DMA_CONTIG >>+ select VIDEO_DAVINCI_VPIF >>+ select VIDEO_ADV7343 >>+ select VIDEO_THS7303 >>+ help >>+ Support for DM6467 based display device. >>+ >>+ To compile this driver as a module, choose M here: the >>+ module will be called vpif_display. >>+ >>+config CAPTURE_DAVINCI_DM646X_EVM >>+ tristate "DM646x EVM Video Capture" >>+ depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM >>+ select VIDEOBUF_DMA_CONTIG >>+ select VIDEO_DAVINCI_VPIF >>+ help >>+ Support for DM6467 based capture device. >>+ >>+ To compile this driver as a module, choose M here: the >>+ module will be called vpif_capture. >>+ >>+config VIDEO_DAVINCI_VPIF >>+ tristate "DaVinci VPIF Driver" >>+ depends on DISPLAY_DAVINCI_DM646X_EVM >>+ help >>+ Support for DaVinci VPIF Driver. >>+ >>+ To compile this driver as a module, choose M here: the >>+ module will be called vpif. >>+ >>+config VIDEO_VPSS_SYSTEM >>+ tristate "VPSS System module driver" >>+ depends on ARCH_DAVINCI >>+ help >>+ Support for vpss system module for video driver >>+ >>+config VIDEO_VPFE_CAPTURE >>+ tristate "VPFE Video Capture Driver" >>+ depends on VIDEO_V4L2 && (ARCH_DAVINCI || ARCH_OMAP3) >>+ select VIDEOBUF_DMA_CONTIG >>+ help >>+ Support for DMx/AMx VPFE based frame grabber. This is the >>+ common V4L2 module for following DMx/AMx SoCs from Texas >>+ Instruments:- DM6446, DM355 & AM3517/05. >>+ >>+ To compile this driver as a module, choose M here: the >>+ module will be called vpfe-capture. >>+ >>+config VIDEO_DM6446_CCDC >>+ tristate "DM6446 CCDC HW module" >>+ depends on VIDEO_VPFE_CAPTURE >>+ select VIDEO_VPSS_SYSTEM >>+ default y >>+ help >>+ Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces >>+ with decoder modules such as TVP5146 over BT656 or >>+ sensor module such as MT9T001 over a raw interface. This >>+ module configures the interface and CCDC/ISIF to do >>+ video frame capture from slave decoders. >>+ >>+ To compile this driver as a module, choose M here: the >>+ module will be called vpfe. >>+ >>+config VIDEO_DM355_CCDC >>+ tristate "DM355 CCDC HW module" >>+ depends on ARCH_DAVINCI_DM355 && VIDEO_VPFE_CAPTURE >>+ select VIDEO_VPSS_SYSTEM >>+ default y >>+ help >>+ Enables DM355 CCD hw module. DM355 CCDC hw interfaces >>+ with decoder modules such as TVP5146 over BT656 or >>+ sensor module such as MT9T001 over a raw interface. This >>+ module configures the interface and CCDC/ISIF to do >>+ video frame capture from a slave decoders >>+ >>+ To compile this driver as a module, choose M here: the >>+ module will be called vpfe. >>+ >>+config VIDEO_ISIF >>+ tristate "ISIF HW module" >>+ depends on ARCH_DAVINCI_DM365 && VIDEO_VPFE_CAPTURE >>+ select VIDEO_VPSS_SYSTEM >>+ default y >>+ help >>+ Enables ISIF hw module. This is the hardware module for >>+ configuring ISIF in VPFE to capture Raw Bayer RGB data from >>+ a image sensor or YUV data from a YUV source. >>+ >>+ To compile this driver as a module, choose M here: the >>+ module will be called vpfe. >>-- >>1.6.2.4 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
