Murali Karicheri Software Design Engineer Texas Instruments Inc. Germantown, MD 20874 phone: 301-407-9583 email: m-karicheri2@xxxxxx >-----Original Message----- >From: Hiremath, Vaibhav >Sent: Thursday, May 27, 2010 9:11 AM >To: linux-media@xxxxxxxxxxxxxxx >Cc: mchehab@xxxxxxxxxx; Karicheri, Muralidharan; linux- >omap@xxxxxxxxxxxxxxx; Hiremath, Vaibhav >Subject: [PATCH 1/2] Davinci: Create seperate Kconfig file for davinci >devices > >From: Vaibhav Hiremath <hvaibhav@xxxxxx> > >Currently VPFE Capture driver and DM6446 CCDC driver is being >reused for AM3517. So this patch is preparing the Kconfig/makefile >for re-use of such IP's. > >Signed-off-by: Vaibhav Hiremath <hvaibhav@xxxxxx> >--- > drivers/media/video/Kconfig | 61 +---------------------- > drivers/media/video/Makefile | 2 +- > drivers/media/video/davinci/Kconfig | 93 >+++++++++++++++++++++++++++++++++++ > 3 files changed, 95 insertions(+), 61 deletions(-) > create mode 100644 drivers/media/video/davinci/Kconfig > >diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig >index ad9e6f9..e5d74ae 100644 >--- a/drivers/media/video/Kconfig >+++ b/drivers/media/video/Kconfig >@@ -570,66 +570,7 @@ config VIDEO_VIVI > Say Y here if you want to test video apps or debug V4L devices. > In doubt, say N. > >-config VIDEO_VPSS_SYSTEM >- tristate "VPSS System module driver" >- depends on ARCH_DAVINCI >- help >- Support for vpss system module for video driver >- >-config VIDEO_VPFE_CAPTURE >- tristate "VPFE Video Capture Driver" >- depends on VIDEO_V4L2 && ARCH_DAVINCI >- select VIDEOBUF_DMA_CONTIG >- help >- Support for DMXXXX VPFE based frame grabber. This is the >- common V4L2 module for following DMXXX SoCs from Texas >- Instruments:- DM6446 & DM355. >- Vaibhav, Could you also list DM365 here? This was somehow missed. >- To compile this driver as a module, choose M here: the >- module will be called vpfe-capture. >- >-config VIDEO_DM6446_CCDC >- tristate "DM6446 CCDC HW module" >- depends on ARCH_DAVINCI_DM644x && VIDEO_VPFE_CAPTURE >- select VIDEO_VPSS_SYSTEM >- default y >- help >- Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces >- with decoder modules such as TVP5146 over BT656 or >- sensor module such as MT9T001 over a raw interface. This >- module configures the interface and CCDC/ISIF to do >- video frame capture from slave decoders. >- >- To compile this driver as a module, choose M here: the >- module will be called vpfe. >- >-config VIDEO_DM355_CCDC >- tristate "DM355 CCDC HW module" >- depends on ARCH_DAVINCI_DM355 && VIDEO_VPFE_CAPTURE >- select VIDEO_VPSS_SYSTEM >- default y >- help >- Enables DM355 CCD hw module. DM355 CCDC hw interfaces >- with decoder modules such as TVP5146 over BT656 or >- sensor module such as MT9T001 over a raw interface. This >- module configures the interface and CCDC/ISIF to do >- video frame capture from a slave decoders >- >- To compile this driver as a module, choose M here: the >- module will be called vpfe. >- >-config VIDEO_ISIF >- tristate "ISIF HW module" >- depends on ARCH_DAVINCI_DM365 && VIDEO_VPFE_CAPTURE >- select VIDEO_VPSS_SYSTEM >- default y >- help >- Enables ISIF hw module. This is the hardware module for >- configuring ISIF in VPFE to capture Raw Bayer RGB data from >- a image sensor or YUV data from a YUV source. >- >- To compile this driver as a module, choose M here: the >- module will be called vpfe. >+source "drivers/media/video/davinci/Kconfig" > > source "drivers/media/video/omap/Kconfig" > >diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile >index cc93859..aa1ea2f 100644 >--- a/drivers/media/video/Makefile >+++ b/drivers/media/video/Makefile >@@ -177,7 +177,7 @@ obj-$(CONFIG_VIDEO_SAA7164) += saa7164/ > > obj-$(CONFIG_VIDEO_IR_I2C) += ir-kbd-i2c.o > >-obj-$(CONFIG_ARCH_DAVINCI) += davinci/ >+obj-y += davinci/ > > obj-$(CONFIG_ARCH_OMAP) += omap/ > >diff --git a/drivers/media/video/davinci/Kconfig >b/drivers/media/video/davinci/Kconfig >new file mode 100644 >index 0000000..97f889d >--- /dev/null >+++ b/drivers/media/video/davinci/Kconfig >@@ -0,0 +1,93 @@ >+config DISPLAY_DAVINCI_DM646X_EVM >+ tristate "DM646x EVM Video Display" >+ depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM >+ select VIDEOBUF_DMA_CONTIG >+ select VIDEO_DAVINCI_VPIF >+ select VIDEO_ADV7343 >+ select VIDEO_THS7303 >+ help >+ Support for DM6467 based display device. >+ >+ To compile this driver as a module, choose M here: the >+ module will be called vpif_display. >+ >+config CAPTURE_DAVINCI_DM646X_EVM >+ tristate "DM646x EVM Video Capture" >+ depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM >+ select VIDEOBUF_DMA_CONTIG >+ select VIDEO_DAVINCI_VPIF >+ help >+ Support for DM6467 based capture device. >+ >+ To compile this driver as a module, choose M here: the >+ module will be called vpif_capture. >+ >+config VIDEO_DAVINCI_VPIF >+ tristate "DaVinci VPIF Driver" >+ depends on DISPLAY_DAVINCI_DM646X_EVM >+ help >+ Support for DaVinci VPIF Driver. >+ >+ To compile this driver as a module, choose M here: the >+ module will be called vpif. >+ >+config VIDEO_VPSS_SYSTEM >+ tristate "VPSS System module driver" >+ depends on ARCH_DAVINCI >+ help >+ Support for vpss system module for video driver >+ >+config VIDEO_VPFE_CAPTURE >+ tristate "VPFE Video Capture Driver" >+ depends on VIDEO_V4L2 && (ARCH_DAVINCI || ARCH_OMAP3) >+ select VIDEOBUF_DMA_CONTIG >+ help >+ Support for DMx/AMx VPFE based frame grabber. This is the >+ common V4L2 module for following DMx/AMx SoCs from Texas >+ Instruments:- DM6446, DM355 & AM3517/05. >+ >+ To compile this driver as a module, choose M here: the >+ module will be called vpfe-capture. >+ >+config VIDEO_DM6446_CCDC >+ tristate "DM6446 CCDC HW module" >+ depends on VIDEO_VPFE_CAPTURE >+ select VIDEO_VPSS_SYSTEM >+ default y >+ help >+ Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces >+ with decoder modules such as TVP5146 over BT656 or >+ sensor module such as MT9T001 over a raw interface. This >+ module configures the interface and CCDC/ISIF to do >+ video frame capture from slave decoders. >+ >+ To compile this driver as a module, choose M here: the >+ module will be called vpfe. >+ >+config VIDEO_DM355_CCDC >+ tristate "DM355 CCDC HW module" >+ depends on ARCH_DAVINCI_DM355 && VIDEO_VPFE_CAPTURE >+ select VIDEO_VPSS_SYSTEM >+ default y >+ help >+ Enables DM355 CCD hw module. DM355 CCDC hw interfaces >+ with decoder modules such as TVP5146 over BT656 or >+ sensor module such as MT9T001 over a raw interface. This >+ module configures the interface and CCDC/ISIF to do >+ video frame capture from a slave decoders >+ >+ To compile this driver as a module, choose M here: the >+ module will be called vpfe. >+ >+config VIDEO_ISIF >+ tristate "ISIF HW module" >+ depends on ARCH_DAVINCI_DM365 && VIDEO_VPFE_CAPTURE >+ select VIDEO_VPSS_SYSTEM >+ default y >+ help >+ Enables ISIF hw module. This is the hardware module for >+ configuring ISIF in VPFE to capture Raw Bayer RGB data from >+ a image sensor or YUV data from a YUV source. >+ >+ To compile this driver as a module, choose M here: the >+ module will be called vpfe. >-- >1.6.2.4 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
