RE: [PATCH 1/2] Davinci: Create seperate Kconfig file for davinci devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



________________________________________
From: Karicheri, Muralidharan
Sent: Wednesday, June 02, 2010 7:23 PM
To: Hiremath, Vaibhav; linux-media@xxxxxxxxxxxxxxx
Cc: mchehab@xxxxxxxxxx; linux-omap@xxxxxxxxxxxxxxx
Subject: RE: [PATCH 1/2] Davinci: Create seperate Kconfig file for davinci devices

Murali Karicheri
Software Design Engineer
Texas Instruments Inc.
Germantown, MD 20874
phone: 301-407-9583
email: m-karicheri2@xxxxxx

>-----Original Message-----
>From: Hiremath, Vaibhav
>Sent: Thursday, May 27, 2010 9:11 AM
>To: linux-media@xxxxxxxxxxxxxxx
>Cc: mchehab@xxxxxxxxxx; Karicheri, Muralidharan; linux-
>omap@xxxxxxxxxxxxxxx; Hiremath, Vaibhav
>Subject: [PATCH 1/2] Davinci: Create seperate Kconfig file for davinci
>devices
>
>From: Vaibhav Hiremath <hvaibhav@xxxxxx>
>
>Currently VPFE Capture driver and DM6446 CCDC driver is being
>reused for AM3517. So this patch is preparing the Kconfig/makefile
>for re-use of such IP's.
>
>Signed-off-by: Vaibhav Hiremath <hvaibhav@xxxxxx>
>---
> drivers/media/video/Kconfig         |   61 +----------------------
> drivers/media/video/Makefile        |    2 +-
> drivers/media/video/davinci/Kconfig |   93
>+++++++++++++++++++++++++++++++++++
> 3 files changed, 95 insertions(+), 61 deletions(-)
> create mode 100644 drivers/media/video/davinci/Kconfig
>
>diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
>index ad9e6f9..e5d74ae 100644
>--- a/drivers/media/video/Kconfig
>+++ b/drivers/media/video/Kconfig
>@@ -570,66 +570,7 @@ config VIDEO_VIVI
>         Say Y here if you want to test video apps or debug V4L devices.
>         In doubt, say N.
>
>-config VIDEO_VPSS_SYSTEM
>-      tristate "VPSS System module driver"
>-      depends on ARCH_DAVINCI
>-      help
>-        Support for vpss system module for video driver
>-
>-config VIDEO_VPFE_CAPTURE
>-      tristate "VPFE Video Capture Driver"
>-      depends on VIDEO_V4L2 && ARCH_DAVINCI
>-      select VIDEOBUF_DMA_CONTIG
>-      help
>-        Support for DMXXXX VPFE based frame grabber. This is the
>-        common V4L2 module for following DMXXX SoCs from Texas
>-        Instruments:- DM6446 & DM355.
>-


>> Vaibhav,

>> Could you also list DM365 here? This was somehow missed.

I believe you are referring to 

Instruments:- DM6446, DM365  & DM355

Submitting this patch alone with this change.

Thanks,
Vaibhav

>-        To compile this driver as a module, choose M here: the
>-        module will be called vpfe-capture.
>-
>-config VIDEO_DM6446_CCDC
>-      tristate "DM6446 CCDC HW module"
>-      depends on ARCH_DAVINCI_DM644x && VIDEO_VPFE_CAPTURE
>-      select VIDEO_VPSS_SYSTEM
>-      default y
>-      help
>-         Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces
>-         with decoder modules such as TVP5146 over BT656 or
>-         sensor module such as MT9T001 over a raw interface. This
>-         module configures the interface and CCDC/ISIF to do
>-         video frame capture from slave decoders.
>-
>-         To compile this driver as a module, choose M here: the
>-         module will be called vpfe.
>-
>-config VIDEO_DM355_CCDC
>-      tristate "DM355 CCDC HW module"
>-      depends on ARCH_DAVINCI_DM355 && VIDEO_VPFE_CAPTURE
>-      select VIDEO_VPSS_SYSTEM
>-      default y
>-      help
>-         Enables DM355 CCD hw module. DM355 CCDC hw interfaces
>-         with decoder modules such as TVP5146 over BT656 or
>-         sensor module such as MT9T001 over a raw interface. This
>-         module configures the interface and CCDC/ISIF to do
>-         video frame capture from a slave decoders
>-
>-         To compile this driver as a module, choose M here: the
>-         module will be called vpfe.
>-
>-config VIDEO_ISIF
>-      tristate "ISIF HW module"
>-      depends on ARCH_DAVINCI_DM365 && VIDEO_VPFE_CAPTURE
>-      select VIDEO_VPSS_SYSTEM
>-      default y
>-      help
>-         Enables ISIF hw module. This is the hardware module for
>-         configuring ISIF in VPFE to capture Raw Bayer RGB data  from
>-         a image sensor or YUV data from a YUV source.
>-
>-         To compile this driver as a module, choose M here: the
>-         module will be called vpfe.
>+source "drivers/media/video/davinci/Kconfig"
>
> source "drivers/media/video/omap/Kconfig"
>
>diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
>index cc93859..aa1ea2f 100644
>--- a/drivers/media/video/Makefile
>+++ b/drivers/media/video/Makefile
>@@ -177,7 +177,7 @@ obj-$(CONFIG_VIDEO_SAA7164)     += saa7164/
>
> obj-$(CONFIG_VIDEO_IR_I2C)  += ir-kbd-i2c.o
>
>-obj-$(CONFIG_ARCH_DAVINCI)    += davinci/
>+obj-y += davinci/
>
> obj-$(CONFIG_ARCH_OMAP)       += omap/
>
>diff --git a/drivers/media/video/davinci/Kconfig
>b/drivers/media/video/davinci/Kconfig
>new file mode 100644
>index 0000000..97f889d
>--- /dev/null
>+++ b/drivers/media/video/davinci/Kconfig
>@@ -0,0 +1,93 @@
>+config DISPLAY_DAVINCI_DM646X_EVM
>+      tristate "DM646x EVM Video Display"
>+      depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM
>+      select VIDEOBUF_DMA_CONTIG
>+      select VIDEO_DAVINCI_VPIF
>+      select VIDEO_ADV7343
>+      select VIDEO_THS7303
>+      help
>+        Support for DM6467 based display device.
>+
>+        To compile this driver as a module, choose M here: the
>+        module will be called vpif_display.
>+
>+config CAPTURE_DAVINCI_DM646X_EVM
>+      tristate "DM646x EVM Video Capture"
>+      depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM
>+      select VIDEOBUF_DMA_CONTIG
>+      select VIDEO_DAVINCI_VPIF
>+      help
>+        Support for DM6467 based capture device.
>+
>+        To compile this driver as a module, choose M here: the
>+        module will be called vpif_capture.
>+
>+config VIDEO_DAVINCI_VPIF
>+      tristate "DaVinci VPIF Driver"
>+      depends on DISPLAY_DAVINCI_DM646X_EVM
>+      help
>+        Support for DaVinci VPIF Driver.
>+
>+        To compile this driver as a module, choose M here: the
>+        module will be called vpif.
>+
>+config VIDEO_VPSS_SYSTEM
>+      tristate "VPSS System module driver"
>+      depends on ARCH_DAVINCI
>+      help
>+        Support for vpss system module for video driver
>+
>+config VIDEO_VPFE_CAPTURE
>+      tristate "VPFE Video Capture Driver"
>+      depends on VIDEO_V4L2 && (ARCH_DAVINCI || ARCH_OMAP3)
>+      select VIDEOBUF_DMA_CONTIG
>+      help
>+        Support for DMx/AMx VPFE based frame grabber. This is the
>+        common V4L2 module for following DMx/AMx SoCs from Texas
>+        Instruments:- DM6446, DM355 & AM3517/05.
>+
>+        To compile this driver as a module, choose M here: the
>+        module will be called vpfe-capture.
>+
>+config VIDEO_DM6446_CCDC
>+      tristate "DM6446 CCDC HW module"
>+      depends on VIDEO_VPFE_CAPTURE
>+      select VIDEO_VPSS_SYSTEM
>+      default y
>+      help
>+         Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces
>+         with decoder modules such as TVP5146 over BT656 or
>+         sensor module such as MT9T001 over a raw interface. This
>+         module configures the interface and CCDC/ISIF to do
>+         video frame capture from slave decoders.
>+
>+         To compile this driver as a module, choose M here: the
>+         module will be called vpfe.
>+
>+config VIDEO_DM355_CCDC
>+      tristate "DM355 CCDC HW module"
>+      depends on ARCH_DAVINCI_DM355 && VIDEO_VPFE_CAPTURE
>+      select VIDEO_VPSS_SYSTEM
>+      default y
>+      help
>+         Enables DM355 CCD hw module. DM355 CCDC hw interfaces
>+         with decoder modules such as TVP5146 over BT656 or
>+         sensor module such as MT9T001 over a raw interface. This
>+         module configures the interface and CCDC/ISIF to do
>+         video frame capture from a slave decoders
>+
>+         To compile this driver as a module, choose M here: the
>+         module will be called vpfe.
>+
>+config VIDEO_ISIF
>+      tristate "ISIF HW module"
>+      depends on ARCH_DAVINCI_DM365 && VIDEO_VPFE_CAPTURE
>+      select VIDEO_VPSS_SYSTEM
>+      default y
>+      help
>+         Enables ISIF hw module. This is the hardware module for
>+         configuring ISIF in VPFE to capture Raw Bayer RGB data  from
>+         a image sensor or YUV data from a YUV source.
>+
>+         To compile this driver as a module, choose M here: the
>+         module will be called vpfe.
>--
>1.6.2.4

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux