Hi Sakari, On Thu, 2021-07-08 at 14:23 +0300, Sakari Ailus wrote: > Hi Stefan, > > Thanks for the patch. Thanks for your feedback! > > On Thu, Jul 08, 2021 at 11:19:21AM +0200, Stefan Riedmueller wrote: > > Convert mt9p031 sensor bindings to yaml schema. Also update the > > MAINTAINERS entry. > > > > Signed-off-by: Stefan Riedmueller <s.riedmueller@xxxxxxxxx> > > --- > > .../bindings/media/i2c/aptina,mt9p031.yaml | 75 +++++++++++++++++++ > > .../devicetree/bindings/media/i2c/mt9p031.txt | 40 ---------- > > MAINTAINERS | 1 + > > 3 files changed, 76 insertions(+), 40 deletions(-) > > create mode 100644 > > Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml > > delete mode 100644 > > Documentation/devicetree/bindings/media/i2c/mt9p031.txt > > > > diff --git > > a/Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml > > b/Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml > > new file mode 100644 > > index 000000000000..7de62e339895 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml > > @@ -0,0 +1,75 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/media/i2c/mt9p031.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Aptina 1/2.5-Inch 5Mp CMOS Digital Image Sensor > > + > > +maintainers: > > + - Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> > > + > > +description: | > > + The Aptina MT9P031 is a 1/2.5-inch CMOS active pixel digital image > > sensor > > + with an active array size of 2592H x 1944V. It is programmable through > > a > > + simple two-wire serial interface. > > + > > +properties: > > + compatible: > > + enum: > > + - aptina,mt9p031 > > + - aptina,mt9p031m > > + > > + reg: > > + description: I2C device address > > + maxItems: 1 > > + > > + reset-gpios: > > + maxItems: 1 > > + description: Chip reset GPIO > > + > > + port: > > + $ref: /schemas/graph.yaml#/properties/port > > This should probably be: > > $ref: /schemas/graph.yaml#/$defs/port-base I actually was not sure which one of these to use because I found both in existing bindings. Also /schemas/graph.yaml#/properties/port has a reference to $defs/port-base. It would be nice if you or someone else could give me a hint why /schemas/graph.yaml#/$defs/port-base would be the correct one here. > > > + addittionalProeprties: false > > Could you run > > make dt_binding_check > DT_SCHEMA_FILES=Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.y > aml > > please? Sorry, I totally forgot about this. I'll do so before sending the next version. > > > + > > + properties: > > + endpoint: > > + $ref: /schemas/media/video-interfaces.yaml# > > + unevaluatedProperties: false > > + > > + properties: > > + input-clock-frequency: true > > + pixel-clock-frequency: true > > These two legacy properties were not in the endpoint previously. That's right, but they are being parsed from the endpoint so I figured they belong here. Should I mention this in the commit message? Thanks, Stefan > > > + > > + required: > > + - input-clock-frequency > > + - pixel-clock-frequency > > + > > +required: > > + - compatible > > + - reg > > + - port > > + > > +additionalProperties: false > > + > > +examples: > > + - | > > + i2c0 { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + mt9p031@5d { > > + compatible = "aptina,mt9p031"; > > + reg = <0x5d>; > > + reset-gpios = <&gpio_sensor 0 0>; > > + > > + port { > > + mt9p031_1: endpoint { > > + input-clock-frequency = <6000000>; > > + pixel-clock-frequency = <96000000>; > > + }; > > + }; > > + }: > > + }; > > + > > +... > > diff --git a/Documentation/devicetree/bindings/media/i2c/mt9p031.txt > > b/Documentation/devicetree/bindings/media/i2c/mt9p031.txt > > deleted file mode 100644 > > index cb60443ff78f..000000000000 > > --- a/Documentation/devicetree/bindings/media/i2c/mt9p031.txt > > +++ /dev/null > > @@ -1,40 +0,0 @@ > > -* Aptina 1/2.5-Inch 5Mp CMOS Digital Image Sensor > > - > > -The Aptina MT9P031 is a 1/2.5-inch CMOS active pixel digital image sensor > > with > > -an active array size of 2592H x 1944V. It is programmable through a > > simple > > -two-wire serial interface. > > - > > -Required Properties: > > -- compatible: value should be either one among the following > > - (a) "aptina,mt9p031" for mt9p031 sensor > > - (b) "aptina,mt9p031m" for mt9p031m sensor > > - > > -- input-clock-frequency: Input clock frequency. > > - > > -- pixel-clock-frequency: Pixel clock frequency. > > - > > -Optional Properties: > > -- reset-gpios: Chip reset GPIO > > - > > -For further reading on port node refer to > > -Documentation/devicetree/bindings/media/video-interfaces.txt. > > - > > -Example: > > - > > - i2c0@1c22000 { > > - ... > > - ... > > - mt9p031@5d { > > - compatible = "aptina,mt9p031"; > > - reg = <0x5d>; > > - reset-gpios = <&gpio3 30 0>; > > - > > - port { > > - mt9p031_1: endpoint { > > - input-clock-frequency = <6000000>; > > - pixel-clock-frequency = <96000000>; > > - }; > > - }; > > - }; > > - ... > > - }; > > diff --git a/MAINTAINERS b/MAINTAINERS > > index c7456776ace5..f2123226baae 100644 > > --- a/MAINTAINERS > > +++ b/MAINTAINERS > > @@ -12610,6 +12610,7 @@ M: Laurent Pinchart < > > laurent.pinchart@xxxxxxxxxxxxxxxx> > > L: linux-media@xxxxxxxxxxxxxxx > > S: Maintained > > T: git git://linuxtv.org/media_tree.git > > +F: Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml > > F: drivers/media/i2c/mt9p031.c > > F: include/media/i2c/mt9p031.h > >
