[PATCH] media: rcar-csi2: do not update format while streaming

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Verify that streaming is not active before setting the pad format.

According to the VIDIOC documentation [1] changes to the active
format of a media pad via the VIDIOC_SUBDEV_S_FMT ioctl are
applied to the underlying hardware.
In rcar-csi2 a format change only applies to hardware, when the
pipeline is started. While the device is not in use, it is therefore
okay to update the format.

However, when the pipeline is active, this leads to a format
mismatch between driver and device.
Other applications can query the format with
VIDIOC_SUBDEV_G_FMT at any time and would be reported
a format that does not fit the current stream.

This commit prevents format update while streaming is active
and returns -EBUSY to user space, as suggested by [1].

[1] Documentation/userspace-api/media/v4l/vidioc-subdev-g-fmt.rst

Note: after creation of this commit, it was noticed that Steve
Longerbeam has a very similar solution in his fork.

Fixes: 769afd212b16 ("media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver")
Cc: Steve Longerbeam <slongerbeam@xxxxxxxxx>
Signed-off-by: Dennis Rachui <drachui@xxxxxxxxxxxxxx>
---
 drivers/media/platform/rcar-vin/rcar-csi2.c | 21 ++++++++++++++++++++-
 1 file changed, 20 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/rcar-vin/rcar-csi2.c b/drivers/media/platform/rcar-vin/rcar-csi2.c
index e28eff0..98152e1 100644
--- a/drivers/media/platform/rcar-vin/rcar-csi2.c
+++ b/drivers/media/platform/rcar-vin/rcar-csi2.c
@@ -724,18 +724,37 @@ static int rcsi2_set_pad_format(struct v4l2_subdev *sd,
 {
 	struct rcar_csi2 *priv = sd_to_csi2(sd);
 	struct v4l2_mbus_framefmt *framefmt;
+	int ret = 0;
+
+	mutex_lock(&priv->lock);
 
 	if (!rcsi2_code_to_fmt(format->format.code))
 		format->format.code = rcar_csi2_formats[0].code;
 
 	if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
+
+		/*
+		 * Do not apply changes to active format while streaming.
+		 *
+		 * Since video streams could be forwarded from sink pad to any
+		 * source pad (depending on CSI-2 channel routing), all
+		 * media pads are effected by this rule.
+		 */
+		if (priv->stream_count > 0) {
+			ret = -EBUSY;
+			goto out;
+		}
+
 		priv->mf = format->format;
 	} else {
 		framefmt = v4l2_subdev_get_try_format(sd, sd_state, 0);
 		*framefmt = format->format;
 	}
 
-	return 0;
+out:
+	mutex_unlock(&priv->lock);
+
+	return ret;
 }
 
 static int rcsi2_get_pad_format(struct v4l2_subdev *sd,
-- 
2.7.4




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux