Convert mt9p031 sensor bindings to yaml schema. Also update the MAINTAINERS entry. Signed-off-by: Stefan Riedmueller <s.riedmueller@xxxxxxxxx> --- .../bindings/media/i2c/aptina,mt9p031.yaml | 75 +++++++++++++++++++ .../devicetree/bindings/media/i2c/mt9p031.txt | 40 ---------- MAINTAINERS | 1 + 3 files changed, 76 insertions(+), 40 deletions(-) create mode 100644 Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml delete mode 100644 Documentation/devicetree/bindings/media/i2c/mt9p031.txt diff --git a/Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml b/Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml new file mode 100644 index 000000000000..7de62e339895 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/mt9p031.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Aptina 1/2.5-Inch 5Mp CMOS Digital Image Sensor + +maintainers: + - Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> + +description: | + The Aptina MT9P031 is a 1/2.5-inch CMOS active pixel digital image sensor + with an active array size of 2592H x 1944V. It is programmable through a + simple two-wire serial interface. + +properties: + compatible: + enum: + - aptina,mt9p031 + - aptina,mt9p031m + + reg: + description: I2C device address + maxItems: 1 + + reset-gpios: + maxItems: 1 + description: Chip reset GPIO + + port: + $ref: /schemas/graph.yaml#/properties/port + addittionalProeprties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + input-clock-frequency: true + pixel-clock-frequency: true + + required: + - input-clock-frequency + - pixel-clock-frequency + +required: + - compatible + - reg + - port + +additionalProperties: false + +examples: + - | + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + mt9p031@5d { + compatible = "aptina,mt9p031"; + reg = <0x5d>; + reset-gpios = <&gpio_sensor 0 0>; + + port { + mt9p031_1: endpoint { + input-clock-frequency = <6000000>; + pixel-clock-frequency = <96000000>; + }; + }; + }: + }; + +... diff --git a/Documentation/devicetree/bindings/media/i2c/mt9p031.txt b/Documentation/devicetree/bindings/media/i2c/mt9p031.txt deleted file mode 100644 index cb60443ff78f..000000000000 --- a/Documentation/devicetree/bindings/media/i2c/mt9p031.txt +++ /dev/null @@ -1,40 +0,0 @@ -* Aptina 1/2.5-Inch 5Mp CMOS Digital Image Sensor - -The Aptina MT9P031 is a 1/2.5-inch CMOS active pixel digital image sensor with -an active array size of 2592H x 1944V. It is programmable through a simple -two-wire serial interface. - -Required Properties: -- compatible: value should be either one among the following - (a) "aptina,mt9p031" for mt9p031 sensor - (b) "aptina,mt9p031m" for mt9p031m sensor - -- input-clock-frequency: Input clock frequency. - -- pixel-clock-frequency: Pixel clock frequency. - -Optional Properties: -- reset-gpios: Chip reset GPIO - -For further reading on port node refer to -Documentation/devicetree/bindings/media/video-interfaces.txt. - -Example: - - i2c0@1c22000 { - ... - ... - mt9p031@5d { - compatible = "aptina,mt9p031"; - reg = <0x5d>; - reset-gpios = <&gpio3 30 0>; - - port { - mt9p031_1: endpoint { - input-clock-frequency = <6000000>; - pixel-clock-frequency = <96000000>; - }; - }; - }; - ... - }; diff --git a/MAINTAINERS b/MAINTAINERS index c7456776ace5..f2123226baae 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -12610,6 +12610,7 @@ M: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> L: linux-media@xxxxxxxxxxxxxxx S: Maintained T: git git://linuxtv.org/media_tree.git +F: Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml F: drivers/media/i2c/mt9p031.c F: include/media/i2c/mt9p031.h -- 2.25.1
