Re: [PATCH v2 2/2] media: dt-bindings: media: i2c: Add bindings for ADDI9036

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Bogdan,

On Thu, Oct 08, 2020 at 06:23:33AM +0000, Togorean, Bogdan wrote:
> Thank you Rob for review
> > On Fri, Oct 02, 2020 at 04:35:17PM +0300, Bogdan Togorean wrote:
> > > Add YAML device tree bindings for Analog Devices Inc. ADDI9036 CCD TOF
> > > front-end.
> > >
> > > Signed-off-by: Bogdan Togorean <bogdan.togorean@xxxxxxxxxx>
> > > ---
> > > v2: added reg property description
> > > ---
> > >  .../bindings/media/i2c/adi,addi9036.yaml      | 76 +++++++++++++++++++
> > >  1 file changed, 76 insertions(+)
> > >  create mode 100644
> > Documentation/devicetree/bindings/media/i2c/adi,addi9036.yaml
> > >
> > > diff --git a/Documentation/devicetree/bindings/media/i2c/adi,addi9036.yaml
> > b/Documentation/devicetree/bindings/media/i2c/adi,addi9036.yaml
> > > new file mode 100644
> > > index 000000000000..7c4af704db98
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/media/i2c/adi,addi9036.yaml
> > > @@ -0,0 +1,76 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id:
> > https://urldefense.com/v3/__http://devicetree.org/schemas/media/i2c/adi,add
> > i9036.yaml*__;Iw!!A3Ni8CS0y2Y!vLJoRikiVhmxm8p3bhGjRkFIWgjXvVlcJ8ATa9okn
> > JqDbtobtK46hHICblE2i2Yj2sZL$
> > > +$schema: https://urldefense.com/v3/__http://devicetree.org/meta-
> > schemas/core.yaml*__;Iw!!A3Ni8CS0y2Y!vLJoRikiVhmxm8p3bhGjRkFIWgjXvVlcJ
> > 8ATa9oknJqDbtobtK46hHICblE2iz34fu4o$
> > > +
> > > +title: Analog Devices ADDI9036 VGA CCD Time of Flight Sensor
> > > +
> > > +maintainers:
> > > +  - Bogdan Togorean <bogdan.togorean@xxxxxxxxxx>
> > > +
> > > +description: |-
> > > +  The ADDI9036 is a complete, 45 MHz, front-end solution for charge coupled
> > > +  device (CCD) time of flight (TOF) imaging applications. It is programmable
> > > +  through I2C interface. Image data is sent through MIPI CSI-2 2 lanes and
> > > +  can output two RAW12 packed data streams. One is IR and the other is
> > Depth.
> > > +  Each data stream is on a separate or same MIPI Virtual Channel, depending
> > > +  on configuration and each have 640x480 resolution.
> > > +
> > > +properties:
> > > +  compatible:
> > > +    const: adi,addi9036
> > > +
> > > +  reg:
> > > +    description: I2C device address
> > 
> > Can drop this.
> ACK
> > 
> > > +    maxItems: 1
> > > +
> > > +  reset-gpios:
> > 
> > maxItems: 1
> ACK
> > 
> > > +    description: |-
> > > +      Reference to the GPIO connected to the RST/SYNC pin, if any.
> > > +      Must be released (set high) after all supplies are applied.
> > > +
> > > +  # See ../video-interfaces.txt for more details
> > > +  port:
> > > +    type: object
> > > +    properties:
> > > +      endpoint:
> > > +        type: object
> > > +        properties:
> > > +          data-lanes:
> > > +            description: |-
> > > +              The sensor supports two-lane operation.
> > > +              For two-lane operation the property must be set to <1 2>.
> > > +            items:
> > > +              - const: 1
> > > +              - const: 2
> > 
> > If this is the only possible setting, then why does it need to be in DT?
> If this is not set the bus_type will be not be correctly set after call of
> v4l2_fwnode_endpoint_parse. 

That's not a DT binding issue. The driver needs to set the field before
calling v4l2_fwnode_endpoint_parse.

Does the device not support one lane operation?

-- 
Regards,

Sakari Ailus



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux