The ADDI9036 is a complete, 45 MHz, front-end solution for charge
coupled device (CCD) time of flight (TOF) imaging applications.
It has 2-lane MIPI CSI-2 RAW12 data output and i2c control interface.
The programming of calibration and firmware is performed by driver
using Linux Firmware API.
Signed-off-by: Bogdan Togorean <bogdan.togorean@xxxxxxxxxx>
---
v2: implemented reading of FW using Linux Firmware API
removed custom controls for FW programming
added custom control to select operating mode
implemented V1 review remarks
cleaned includes list
---
MAINTAINERS | 10 +
drivers/media/i2c/Kconfig | 14 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/addi9036.c | 754 +++++++++++++++++++++++++++++
include/uapi/linux/v4l2-controls.h | 6 +
5 files changed, 785 insertions(+)
create mode 100644 drivers/media/i2c/addi9036.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 0d0862b19ce5..4e3878e6c0ba 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -477,6 +477,16 @@ W: http://wiki.analog.com/AD7879
W: http://ez.analog.com/community/linux-device-drivers
F: drivers/input/touchscreen/ad7879.c
+ADDI9036 TOF FRONTEND DRIVER
+M: Bogdan Togorean <bogdan.togorean@xxxxxxxxxx>
+L: linux-media@xxxxxxxxxxxxxxx
+S: Supported
+W: https://www.analog.com/en/products/addi9036.html
+W: http://ez.analog.com/community/linux-device-drivers
+T: git git://linuxtv.org/media_tree.git
+F: Documentation/devicetree/bindings/media/i2c/adi,addi9036.yaml
+F: drivers/media/i2c/addi9036.c
+
ADDRESS SPACE LAYOUT RANDOMIZATION (ASLR)
M: Jiri Kosina <jikos@xxxxxxxxxx>
S: Maintained
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index c7ba76fee599..087dd307505d 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -725,6 +725,20 @@ config VIDEO_APTINA_PLL
config VIDEO_SMIAPP_PLL
tristate
+config VIDEO_ADDI9036
+ tristate "Analog Devices ADDI9036 ToF front-end support"
+ depends on I2C && VIDEO_V4L2
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ select V4L2_FWNODE
+ select REGMAP_I2C
+ help
+ This is a Video4Linux2 driver for Analog Devices ADDI9036
+ Time of Flight front-end.
+
+ To compile this driver as a module, choose M here: the
+ module will be called addi9036.
+
config VIDEO_HI556
tristate "Hynix Hi-556 sensor support"
depends on I2C && VIDEO_V4L2
diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
index f0a77473979d..631a7c7612ca 100644
--- a/drivers/media/i2c/Makefile
+++ b/drivers/media/i2c/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_VIDEO_AK7375) += ak7375.o
obj-$(CONFIG_VIDEO_DW9714) += dw9714.o
obj-$(CONFIG_VIDEO_DW9768) += dw9768.o
obj-$(CONFIG_VIDEO_DW9807_VCM) += dw9807-vcm.o
+obj-$(CONFIG_VIDEO_ADDI9036) += addi9036.o
obj-$(CONFIG_VIDEO_ADV7170) += adv7170.o
obj-$(CONFIG_VIDEO_ADV7175) += adv7175.o
obj-$(CONFIG_VIDEO_ADV7180) += adv7180.o
diff --git a/drivers/media/i2c/addi9036.c b/drivers/media/i2c/addi9036.c
new file mode 100644
index 000000000000..e38e70afd23d
--- /dev/null
+++ b/drivers/media/i2c/addi9036.c
@@ -0,0 +1,754 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for the Analog Devices ADDI9036 ToF camera sensor.
+ *
+ * Copyright (C) 2019-2020 Analog Devices, All Rights Reserved.
+ *
+ */
+
+#include <linux/gpio/consumer.h>
+#include <linux/firmware.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-fwnode.h>
+#include <media/v4l2-subdev.h>
+
+#define FW_FILE_NAME "adi/addi9036-fw.bin"
+#define ADDI_MAGIC "ADDI9036"
+
+struct addi9036_mode_info {
+ u32 width;
+ u32 height;
+ u32 pixel_rate;
+ u32 link_freq_idx;
+};
+
+struct addi9036_mode_fw_block {
+ const struct reg_sequence *mode_regs;
+ ssize_t regs_count;
+};
+
+struct addi9036_fw_header {
+ unsigned char magic[8];
+ __le32 modes_nr;
+} __packed;
+
+struct addi9036_mode_block {
+ __le32 mode_id;
+ __le32 size_bytes;
+ __le16 data[];
+} __packed;
+
+struct addi9036 {
+ struct regmap *regmap;
+ struct device *dev;
+ struct v4l2_subdev sd;
+ struct media_pad pad;
+ struct v4l2_fwnode_endpoint ep;
+ struct v4l2_mbus_framefmt fmt;
+ struct v4l2_rect crop;
+
+ const struct addi9036_mode_info *current_mode;
+
+ struct v4l2_ctrl_handler ctrls;
+ struct v4l2_ctrl *pixel_rate;
+ struct v4l2_ctrl *link_freq;
+ /* custom controls */
+ struct v4l2_ctrl *set_operating_range;
+
+ /* lock to protect power state */
+ struct mutex power_lock;
+ int power_count;
+ bool streaming;
+
+ struct gpio_desc *rst_gpio;
+
+ /* firmware blocks for each operating mode */
+ struct addi9036_mode_fw_block *mode_fw_blocks;
+ u8 curr_operating_mode;
+
+ const struct firmware *fw;
+};
+
+static inline struct addi9036 *to_addi9036(struct v4l2_subdev *sd)
+{
+ return container_of(sd, struct addi9036, sd);
+}
+
+#define V4L2_CID_ADDI9036_OPERATING_MODE (V4L2_CID_USER_ADDI9036_BASE + 0)
+
+static const struct reg_sequence addi9036_powerup_setting[] = {
+ { 0xc4c0, 0x001c },
+ { 0xc4c3, 0x001c },
+ { 0xc4d7, 0x0000 },
+ { 0xc4d5, 0x0002 },
+ { 0xc4da, 0x0001 },
+ { 0xc4f0, 0x0000 },
+ { 0xc427, 0x0003 },
+ { 0xc427, 0x0001 },
+ { 0xc427, 0x0000 },
+ { 0xc426, 0x0030 },
+ { 0xc426, 0x0010 },
+ { 0xc426, 0x0000 },
+ { 0xc423, 0x0080 },
+ { 0xc431, 0x0080 },
+ { 0x4001, 0x0007 },
+ { 0x7c22, 0x0004 }
+};
+
+static const struct reg_sequence addi9036_powerdown_setting[] = {
+ { 0xc022, 0x0001 },
+ { 0x4001, 0x0006 },
+ { 0x7c22, 0x0004 },
+ { 0xc431, 0x0082 },
+ { 0xc423, 0x0000 },
+ { 0xc426, 0x0020 },
+ { 0xc427, 0x0002 },
+ { 0xc4c0, 0x003c },
+ { 0xc4c3, 0x003c },
+ { 0xc4d5, 0x0003 },
+ { 0xc4da, 0x0000 },
+ { 0xc4d7, 0x0001 },
+ { 0xc4f0, 0x0001 }
+};
+
+static const s64 link_freq_tbl[] = {
+ 110529000,
+ 221184000,
+};
+
+/* Elements of the structure must be ordered ascending by width & height */
+static const struct addi9036_mode_info addi9036_mode_info_data[] = {
+ {
+ .width = 640,
+ .height = 480,
+ .pixel_rate = 36864000,
+ .link_freq_idx = 0 /* an index in link_freq_tbl[] */
+ },
+ {
+ .width = 640,
+ .height = 960,
+ .pixel_rate = 73728000,
+ .link_freq_idx = 1 /* an index in link_freq_tbl[] */
+ },
+};
+
+static bool addi9306_readable_register(struct device *dev, unsigned int reg)
+{
+ if (((reg >= 0x4000) && (reg <= 0x6fff)) ||
+ ((reg >= 0x7c00) && (reg <= 0x7fff)) ||
+ ((reg >= 0xc000) && (reg <= 0xc200)) ||
+ ((reg >= 0xc300) && (reg <= 0xc6bf)))
+ return true;
+ else
+ return false;
+}
+
+static bool addi9306_writeable_register(struct device *dev, unsigned int reg)
+{
+ if (((reg >= 0x4000) && (reg <= 0x6fff)) ||
+ ((reg >= 0x7c00) && (reg <= 0x7fff)) ||
+ ((reg >= 0xc000) && (reg <= 0xc113)) ||
+ ((reg >= 0xc300) && (reg <= 0xc7ff)))
+ return true;
+ else
+ return false;
+}
+
+static const struct regmap_config addi9036_i2c_regmap_config = {
+ .reg_bits = 16,
+ .val_bits = 16,
+ .max_register = 0xc7ff,
+ .writeable_reg = addi9306_writeable_register,
+ .readable_reg = addi9306_readable_register,
+ .cache_type = REGCACHE_NONE,
+};
+
+static int addi9036_set_power_on(struct addi9036 *addi9036)
+{
+ int ret;
+
+ if (addi9036->rst_gpio)
+ gpiod_set_value_cansleep(addi9036->rst_gpio, 0);
+
+ ret = regmap_register_patch(addi9036->regmap, addi9036_powerup_setting,
+ ARRAY_SIZE(addi9036_powerup_setting));
+ if (ret)
+ dev_err(addi9036->dev, "Could not set power up registers\n");
+
+ return ret;
+}
+
+static int addi9036_set_power_off(struct addi9036 *addi9036)
+{
+ int ret;
+
+ ret = regmap_register_patch(addi9036->regmap,
+ addi9036_powerdown_setting,
+ ARRAY_SIZE(addi9036_powerdown_setting));
+ if (ret)
+ dev_err(addi9036->dev, "could not set power down registers\n");
+
+ if (addi9036->rst_gpio)
+ gpiod_set_value_cansleep(addi9036->rst_gpio, 1);
+
+ return ret;
+}
+
+static int addi9036_s_power(struct v4l2_subdev *sd, int on)
+{
+ struct addi9036 *addi9036 = to_addi9036(sd);
+ int ret = 0;
+
+ dev_dbg(addi9036->dev, "s_power: %d\n", on);
+
+ mutex_lock(&addi9036->power_lock);
+
+ /* If the power count is modified from 0 to != 0 or from != 0 to 0,
+ * update the power state.
+ */
+ if (addi9036->power_count == !on) {
+ if (on)
+ ret = addi9036_set_power_on(addi9036);
+ else
+ ret = addi9036_set_power_off(addi9036);
+ }
+
+ if (!ret) {
+ /* Update the power count. */
+ addi9036->power_count += on ? 1 : -1;
+ WARN(addi9036->power_count < 0, "Unbalanced power count\n");
+ WARN(addi9036->power_count > 1, "Duplicated s_power call\n");
+ }
+
+ mutex_unlock(&addi9036->power_lock);
+
+ return ret;
+}
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int addi9036_g_register(struct v4l2_subdev *sd,
+ struct v4l2_dbg_register *reg)
+{
+ struct addi9036 *addi9036 = to_addi9036(sd);
+ unsigned int read_val;
+ int ret;
+
+ reg->size = 2;
+ ret = regmap_read(addi9036->regmap, reg->reg, &read_val);
+ reg->val = read_val;
+
+ return ret;
+}
+
+static int addi9036_s_register(struct v4l2_subdev *sd,
+ const struct v4l2_dbg_register *reg)
+{
+ struct addi9036 *addi9036 = to_addi9036(sd);
+
+ return regmap_write(addi9036->regmap, reg->reg, reg->val);
+}
+#endif
+
+static int addi9036_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+ struct addi9036 *addi9036 = container_of(ctrl->handler,
+ struct addi9036, ctrls);
+ int ret = 0;
+
+ switch (ctrl->id) {
+ case V4L2_CID_ADDI9036_OPERATING_MODE:
+ addi9036->curr_operating_mode = ctrl->val;
+ break;
+ case V4L2_CID_PIXEL_RATE:
+ case V4L2_CID_LINK_FREQ:
+ break;
+ default:
+ dev_err(addi9036->dev, "%s > Unhandled: %x param=%x\n",
+ __func__, ctrl->id, ctrl->val);
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
+static const struct v4l2_ctrl_ops addi9036_ctrl_ops = {
+ .s_ctrl = addi9036_s_ctrl,
+};
+
+static const struct v4l2_ctrl_config addi9036_ctrl_operating_mode = {
+ .ops = &addi9036_ctrl_ops,
+ .id = V4L2_CID_ADDI9036_OPERATING_MODE,
+ .name = "Operating Mode",
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .def = 0,
+ .min = 0,
+ .max = 1,
+ .step = 1,
+};
+
+static int addi9036_enum_mbus_code(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_mbus_code_enum *code)
+{
+ if (code->index > 0)
+ return -EINVAL;
+
+ code->code = MEDIA_BUS_FMT_SBGGR12_1X12;
+
+ return 0;
+}
+
+static int addi9036_enum_frame_size(struct v4l2_subdev *subdev,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_frame_size_enum *fse)
+{
+ if (fse->code != MEDIA_BUS_FMT_SBGGR12_1X12)
+ return -EINVAL;
+
+ if (fse->index >= ARRAY_SIZE(addi9036_mode_info_data))
+ return -EINVAL;
+
+ fse->min_width = addi9036_mode_info_data[fse->index].width;
+ fse->max_width = addi9036_mode_info_data[fse->index].width;
+ fse->min_height = addi9036_mode_info_data[fse->index].height;
+ fse->max_height = addi9036_mode_info_data[fse->index].height;
+
+ return 0;
+}
+
+static struct v4l2_mbus_framefmt *
+addi9036_get_pad_format(struct addi9036 *addi9036,
+ struct v4l2_subdev_pad_config *cfg, unsigned int pad,
+ enum v4l2_subdev_format_whence which)
+{
+ switch (which) {
+ case V4L2_SUBDEV_FORMAT_TRY:
+ return v4l2_subdev_get_try_format(&addi9036->sd, cfg, pad);
+ case V4L2_SUBDEV_FORMAT_ACTIVE:
+ return &addi9036->fmt;
+ default:
+ return NULL;
+ }
+}
+
+static int addi9036_get_format(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *format)
+{
+ struct addi9036 *addi9036 = to_addi9036(sd);
+ struct v4l2_mbus_framefmt *pad_format;
+
+ pad_format = addi9036_get_pad_format(addi9036, cfg, format->pad,
+ format->which);
+
+ if (!pad_format)
+ return -EINVAL;
+
+ format->format = *pad_format;
+
+ return 0;
+}
+
+static struct v4l2_rect *
+addi9036_get_pad_crop(struct addi9036 *addi9036,
+ struct v4l2_subdev_pad_config *cfg,
+ unsigned int pad, enum v4l2_subdev_format_whence which)
+{
+ switch (which) {
+ case V4L2_SUBDEV_FORMAT_TRY:
+ return v4l2_subdev_get_try_crop(&addi9036->sd, cfg, pad);
+ case V4L2_SUBDEV_FORMAT_ACTIVE:
+ return &addi9036->crop;
+ default:
+ return NULL;
+ }
+}
+
+static int addi9036_set_format(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *format)
+{
+ struct addi9036 *addi9036 = to_addi9036(sd);
+ struct v4l2_mbus_framefmt *framefmt;
+ struct v4l2_rect *crop;
+ const struct addi9036_mode_info *new_mode;
+ int ret;
+
+ dev_dbg(addi9036->dev, "set_fmt: %x %dx%d %d\n",
+ format->format.code, format->format.width,
+ format->format.height, format->which);
+
+ crop = addi9036_get_pad_crop(addi9036, cfg, format->pad,
+ format->which);
+
+ if (!crop)
+ return -EINVAL;
+
+ new_mode = v4l2_find_nearest_size(addi9036_mode_info_data,
+ ARRAY_SIZE(addi9036_mode_info_data),
+ width, height, format->format.width,
+ format->format.height);
+ crop->width = new_mode->width;
+ crop->height = new_mode->height;
+
+ if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
+ ret = v4l2_ctrl_s_ctrl_int64(addi9036->pixel_rate,
+ new_mode->pixel_rate);
+ if (ret < 0)
+ return ret;
+
+ ret = v4l2_ctrl_s_ctrl(addi9036->link_freq,
+ new_mode->link_freq_idx);
+ if (ret < 0)
+ return ret;
+
+ addi9036->current_mode = new_mode;
+ }
+
+ framefmt = addi9036_get_pad_format(addi9036, cfg, format->pad,
+ format->which);
+ framefmt->width = crop->width;
+ framefmt->height = crop->height;
+ framefmt->code = MEDIA_BUS_FMT_SBGGR12_1X12;
+ framefmt->field = V4L2_FIELD_NONE;
+ framefmt->colorspace = V4L2_COLORSPACE_SRGB;
+
+ format->format = *framefmt;
+
+ return 0;
+}
+
+static int addi9036_entity_init_cfg(struct v4l2_subdev *subdev,
+ struct v4l2_subdev_pad_config *cfg)
+{
+ struct v4l2_subdev_format fmt = { 0 };
+
+ fmt.which = cfg ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
+ fmt.format.width = addi9036_mode_info_data[1].width;
+ fmt.format.height = addi9036_mode_info_data[1].height;
+
+ addi9036_set_format(subdev, cfg, &fmt);
+
+ return 0;
+}
+
+static int addi9036_get_selection(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_selection *sel)
+{
+ struct addi9036 *addi9036 = to_addi9036(sd);
+
+ if (sel->target != V4L2_SEL_TGT_CROP)
+ return -EINVAL;
+
+ sel->r = *addi9036_get_pad_crop(addi9036, cfg, sel->pad, sel->which);
+
+ return 0;
+}
+
+static int addi9036_s_stream(struct v4l2_subdev *subdev, int enable)
+{
+ struct addi9036 *addi9036 = to_addi9036(subdev);
+ uint8_t mode = addi9036->curr_operating_mode;
+ int ret = 0;
+
+ dev_dbg(addi9036->dev, "s_stream: %d\n", enable);
+
+ if (addi9036->streaming == enable)
+ return 0;
+
+ if (enable) {
+ if (addi9036->mode_fw_blocks[mode].mode_regs == NULL) {
+ dev_err(addi9036->dev, "Selected mode has no data\n");
+ return -EINVAL;
+ }
+
+ dev_dbg(addi9036->dev, "Applying mode: %u\n", mode);
+ ret = regmap_multi_reg_write(addi9036->regmap,
+ addi9036->mode_fw_blocks[mode].mode_regs,
+ addi9036->mode_fw_blocks[mode].regs_count);
+
+ dev_dbg(addi9036->dev, "Writen %lu registers\n",
+ addi9036->mode_fw_blocks[mode].regs_count);
+ }
+
+ addi9036->streaming = enable;
+ return ret;
+}
+
+static const struct v4l2_subdev_core_ops addi9036_core_ops = {
+ .s_power = addi9036_s_power,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+ .g_register = addi9036_g_register,
+ .s_register = addi9036_s_register,
+#endif
+};
+
+static const struct v4l2_subdev_video_ops addi9036_video_ops = {
+ .s_stream = addi9036_s_stream,
+};
+
+static const struct v4l2_subdev_pad_ops addi9036_subdev_pad_ops = {
+ .init_cfg = addi9036_entity_init_cfg,
+ .enum_mbus_code = addi9036_enum_mbus_code,
+ .enum_frame_size = addi9036_enum_frame_size,
+ .get_fmt = addi9036_get_format,
+ .set_fmt = addi9036_set_format,
+ .get_selection = addi9036_get_selection,
+};
+
+static const struct v4l2_subdev_ops addi9036_subdev_ops = {
+ .core = &addi9036_core_ops,
+ .video = &addi9036_video_ops,
+ .pad = &addi9036_subdev_pad_ops,
+};
+
+static int addi9036_g_modes_from_firmware(struct v4l2_subdev *sd)
+{
+ struct addi9036 *addi9036 = to_addi9036(sd);
+ const struct firmware *fw = addi9036->fw;
+ const struct addi9036_fw_header *fw_head;
+ const struct addi9036_mode_block *mode_block;
+ unsigned int reg_nr, chunk_len, pos, modes_nr, i, j, k;
+ struct reg_sequence *reg_seq;
+
+ /*
+ * Reject too small or unreasonable large files.
+ */
+
+ if (fw->size < sizeof(struct addi9036_fw_header) ||
+ fw->size >= 0x4000000) {
+ dev_err(addi9036->dev, "FW loading failed: Invalid size\n");
+ return -EINVAL;
+ }
+
+ fw_head = (struct addi9036_fw_header *)fw->data;
+
+ if (memcmp(fw_head->magic, ADDI_MAGIC, ARRAY_SIZE(fw_head->magic))) {
+ dev_err(addi9036->dev, "FW loading failed: Invalid magic\n");
+ return -EINVAL;
+ }
+
+ modes_nr = le32_to_cpu(fw_head->modes_nr);
+
+ if (modes_nr == 0) {
+ dev_err(addi9036->dev, "FW should contain at least 1 mode.\n");
+ return -EINVAL;
+ }
+
+ __v4l2_ctrl_modify_range(addi9036->set_operating_range,
+ addi9036->set_operating_range->minimum,
+ modes_nr - 1, 1, 0);
+
+ addi9036->mode_fw_blocks = devm_kzalloc(addi9036->dev,
+ sizeof(struct addi9036_mode_fw_block) * modes_nr,
+ GFP_KERNEL);
+ if (!addi9036->mode_fw_blocks)
+ return -ENOMEM;
+
+ pos = sizeof(struct addi9036_fw_header);
+
+ for (i = 0; i < modes_nr; i++) {
+ mode_block = (struct addi9036_mode_block *)(fw->data + pos);
+
+ chunk_len = le32_to_cpu(mode_block->size_bytes);
+ reg_nr = chunk_len / sizeof(uint16_t) / 2;
+
+ reg_seq = devm_kzalloc(addi9036->dev,
+ sizeof(struct reg_sequence) * reg_nr,
+ GFP_KERNEL);
+ if (!reg_seq)
+ return -ENOMEM;
+
+ k = 0;
+ for (j = 0; j < reg_nr * 2; j += 2) {
+ reg_seq[k].reg = le16_to_cpu(mode_block->data[j]);
+ reg_seq[k].def = le16_to_cpu(mode_block->data[j + 1]);
+ k++;
+ }
+
+ addi9036->mode_fw_blocks[i].mode_regs = reg_seq;
+ addi9036->mode_fw_blocks[i].regs_count = reg_nr;
+
+ pos += chunk_len + sizeof(struct addi9036_mode_block);
+ }
+ return 0;
+}
+
+static int addi9036_mode_firmware_load(struct v4l2_subdev *sd)
+{
+ struct addi9036 *addi9036 = to_addi9036(sd);
+ int ret;
+
+ ret = request_firmware(&addi9036->fw, FW_FILE_NAME, addi9036->dev);
+ if (ret < 0) {
+ dev_err(addi9036->dev, "FW request failed\n");
+ return ret;
+ }
+
+ ret = addi9036_g_modes_from_firmware(sd);
+
+ release_firmware(addi9036->fw);
+ if (ret < 0) {
+ dev_err(addi9036->dev, "FW parsing failed\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int addi9036_probe(struct i2c_client *client)
+{
+ struct device *dev = &client->dev;
+ struct fwnode_handle *endpoint;
+ struct addi9036 *addi9036;
+ int ret;
+
+ dev_dbg(dev, "%s: i2c addr = 0x%x\n", __func__, client->addr);
+
+ addi9036 = devm_kzalloc(dev, sizeof(struct addi9036), GFP_KERNEL);
+ if (!addi9036)
+ return -ENOMEM;
+
+ addi9036->dev = dev;
+
+ addi9036->regmap = devm_regmap_init_i2c(client,
+ &addi9036_i2c_regmap_config);
+ if (IS_ERR(addi9036->regmap)) {
+ dev_err(dev, "Error initializing i2c regmap\n");
+ return PTR_ERR(addi9036->regmap);
+ }
+
+ mutex_init(&addi9036->power_lock);
+
+ endpoint = fwnode_graph_get_next_endpoint(dev_fwnode(dev), NULL);
+ if (!endpoint) {
+ dev_err(dev, "endpoint node not found\n");
+ return -EINVAL;
+ }
+
+ ret = v4l2_fwnode_endpoint_parse(endpoint, &addi9036->ep);
+ if (ret < 0) {
+ dev_err(dev, "parsing endpoint node failed\n");
+ return ret;
+ }
+ fwnode_handle_put(endpoint);
+
+ if (addi9036->ep.bus_type != V4L2_MBUS_CSI2_DPHY) {
+ dev_err(dev, "invalid bus type, must be MIPI CSI2\n");
+ return -EINVAL;
+ }
+
+ addi9036->rst_gpio = gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
+ if (IS_ERR(addi9036->rst_gpio))
+ dev_info(dev, "Unable to get \"reset\" gpio\n");
+
+ v4l2_ctrl_handler_init(&addi9036->ctrls, 3);
+
+ addi9036->pixel_rate = v4l2_ctrl_new_std(&addi9036->ctrls,
+ &addi9036_ctrl_ops,
+ V4L2_CID_PIXEL_RATE,
+ 1, INT_MAX, 1, 1);
+ addi9036->link_freq = v4l2_ctrl_new_int_menu(&addi9036->ctrls,
+ &addi9036_ctrl_ops,
+ V4L2_CID_LINK_FREQ,
+ ARRAY_SIZE(
+ link_freq_tbl) - 1,
+ 0, link_freq_tbl);
+ if (addi9036->link_freq)
+ addi9036->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
+
+ addi9036->set_operating_range = v4l2_ctrl_new_custom(&addi9036->ctrls,
+ &addi9036_ctrl_operating_mode,
+ NULL);
+
+ ret = addi9036->ctrls.error;
+ if (ret) {
+ dev_err(dev, "%s: control initialization error %d\n",
+ __func__, ret);
+ goto free_ctrl;
+ }
+ addi9036->sd.ctrl_handler = &addi9036->ctrls;
+
+ v4l2_i2c_subdev_init(&addi9036->sd, client, &addi9036_subdev_ops);
+ addi9036->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+ addi9036->pad.flags = MEDIA_PAD_FL_SOURCE;
+ addi9036->sd.dev = &client->dev;
+ addi9036->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
+
+ ret = media_entity_pads_init(&addi9036->sd.entity, 1, &addi9036->pad);
+ if (ret < 0) {
+ dev_err(dev, "could not register media entity\n");
+ goto free_ctrl;
+ }
+
+ ret = addi9036_mode_firmware_load(&addi9036->sd);
+ if (ret < 0)
+ return ret;
+
+ addi9036_entity_init_cfg(&addi9036->sd, NULL);
+
+ ret = v4l2_async_register_subdev(&addi9036->sd);
+ if (ret < 0) {
+ dev_err(dev, "could not register v4l2 device\n");
+ goto free_entity;
+ }
+
+ return 0;
+
+free_entity:
+ media_entity_cleanup(&addi9036->sd.entity);
+free_ctrl:
+ v4l2_ctrl_handler_free(&addi9036->ctrls);
+ mutex_destroy(&addi9036->power_lock);
+
+ return ret;
+}
+
+static int addi9036_remove(struct i2c_client *client)
+{
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct addi9036 *addi9036 = to_addi9036(sd);
+
+ v4l2_async_unregister_subdev(&addi9036->sd);
+ media_entity_cleanup(&addi9036->sd.entity);
+ if (addi9036->rst_gpio)
+ gpiod_put(addi9036->rst_gpio);
+ v4l2_ctrl_handler_free(&addi9036->ctrls);
+ mutex_destroy(&addi9036->power_lock);
+
+ return 0;
+}
+
+static const struct i2c_device_id addi9036_id[] = {
+ { "addi9036", 0 },
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, addi9036_id);
+
+static const struct of_device_id addi9036_of_match[] = {
+ { .compatible = "adi,addi9036" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, addi9036_of_match);
+
+static struct i2c_driver addi9036_i2c_driver = {
+ .driver = {
+ .of_match_table = addi9036_of_match,
+ .name = "addi9036",
+ },
+ .probe_new = addi9036_probe,
+ .remove = addi9036_remove,
+ .id_table = addi9036_id,
+};
+
+module_i2c_driver(addi9036_i2c_driver);
+
+MODULE_DESCRIPTION("Analog Devices ADDI9036 Camera Driver");
+MODULE_AUTHOR("Bogdan Togorean");
+MODULE_LICENSE("GPL v2");
diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h
index 62271418c1be..f88b56479bc1 100644
--- a/include/uapi/linux/v4l2-controls.h
+++ b/include/uapi/linux/v4l2-controls.h
@@ -198,6 +198,12 @@ enum v4l2_colorfx {
*/
#define V4L2_CID_USER_ATMEL_ISC_BASE (V4L2_CID_USER_BASE + 0x10c0)
+/*
+ * The base for the addi9036 driver controls.
+ * We reserve 16 controls for this driver.
+ */
+#define V4L2_CID_USER_ADDI9036_BASE (V4L2_CID_USER_BASE + 0x10e0)
+
/* MPEG-class control IDs */
/* The MPEG controls are applicable to all codec controls
* and the 'MPEG' part of the define is historical */
--
2.28.0
