On Fri, Oct 02, 2020 at 04:35:17PM +0300, Bogdan Togorean wrote: > Add YAML device tree bindings for Analog Devices Inc. ADDI9036 CCD TOF > front-end. > > Signed-off-by: Bogdan Togorean <bogdan.togorean@xxxxxxxxxx> > --- > v2: added reg property description > --- > .../bindings/media/i2c/adi,addi9036.yaml | 76 +++++++++++++++++++ > 1 file changed, 76 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/i2c/adi,addi9036.yaml > > diff --git a/Documentation/devicetree/bindings/media/i2c/adi,addi9036.yaml b/Documentation/devicetree/bindings/media/i2c/adi,addi9036.yaml > new file mode 100644 > index 000000000000..7c4af704db98 > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/i2c/adi,addi9036.yaml > @@ -0,0 +1,76 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/media/i2c/adi,addi9036.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Analog Devices ADDI9036 VGA CCD Time of Flight Sensor > + > +maintainers: > + - Bogdan Togorean <bogdan.togorean@xxxxxxxxxx> > + > +description: |- > + The ADDI9036 is a complete, 45 MHz, front-end solution for charge coupled > + device (CCD) time of flight (TOF) imaging applications. It is programmable > + through I2C interface. Image data is sent through MIPI CSI-2 2 lanes and > + can output two RAW12 packed data streams. One is IR and the other is Depth. > + Each data stream is on a separate or same MIPI Virtual Channel, depending > + on configuration and each have 640x480 resolution. > + > +properties: > + compatible: > + const: adi,addi9036 > + > + reg: > + description: I2C device address Can drop this. > + maxItems: 1 > + > + reset-gpios: maxItems: 1 > + description: |- > + Reference to the GPIO connected to the RST/SYNC pin, if any. > + Must be released (set high) after all supplies are applied. > + > + # See ../video-interfaces.txt for more details > + port: > + type: object > + properties: > + endpoint: > + type: object > + properties: > + data-lanes: > + description: |- > + The sensor supports two-lane operation. > + For two-lane operation the property must be set to <1 2>. > + items: > + - const: 1 > + - const: 2 If this is the only possible setting, then why does it need to be in DT? > + > +required: > + - compatible > + - reg > + - port > + > +additionalProperties: false > + > +examples: > + - | > + i2c0 { > + #address-cells = <1>; > + #size-cells = <0>; > + > + addi9036: addi9036_tof@64 { > + compatible = "adi,addi9036"; > + reg = <0x64>; > + > + reset-gpios = <&gpio 41 1>; > + > + port { > + addi9036_ep: endpoint { > + remote-endpoint = <&csi1_ep>; > + data-lanes = <1 2>; > + }; > + }; > + }; > + }; > + > +... > -- > 2.28.0 >
