Add the USB vendor and product ID of the TerraTec G3 [1], so Linux
detects the device.
[ 38.093023] usb 1-3: new high-speed USB device number 4 using xhci_hcd
[ 38.240404] usb 1-3: config 1 interface 0 altsetting 1 endpoint 0x82 has invalid wMaxPacketSize 0
[ 38.240408] usb 1-3: config 1 interface 0 altsetting 1 endpoint 0x84 has invalid wMaxPacketSize 0
[ 38.240411] usb 1-3: config 1 interface 0 altsetting 2 endpoint 0x84 has invalid wMaxPacketSize 0
[ 38.240413] usb 1-3: config 1 interface 0 altsetting 3 endpoint 0x84 has invalid wMaxPacketSize 0
[ 38.240416] usb 1-3: config 1 interface 0 altsetting 4 endpoint 0x84 has invalid wMaxPacketSize 0
[ 38.240418] usb 1-3: config 1 interface 0 altsetting 5 endpoint 0x84 has invalid wMaxPacketSize 0
[ 38.240420] usb 1-3: config 1 interface 0 altsetting 6 endpoint 0x84 has invalid wMaxPacketSize 0
[ 38.240423] usb 1-3: config 1 interface 0 altsetting 7 endpoint 0x84 has invalid wMaxPacketSize 0
[ 38.255077] usb 1-3: New USB device found, idVendor=0ccd, idProduct=10a7, bcdDevice= 1.00
[ 38.255080] usb 1-3: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 38.255082] usb 1-3: Product: TerraTec G3
[ 38.255085] usb 1-3: Manufacturer: TerraTec Electronic GmbH
[ 38.286444] videodev: Linux video capture interface: v2.00
[ 38.290861] em28xx 1-3:1.0: New device TerraTec Electronic GmbH TerraTec G3 @ 480 Mbps (0ccd:10a7, interface 0, class 0)
[ 38.290863] em28xx 1-3:1.0: Video interface 0 found: isoc
[ 38.349064] em28xx 1-3:1.0: chip ID is em2860
[ 38.515453] em28xx 1-3:1.0: EEPROM ID = 1a eb 67 95, EEPROM hash = 0xd7a2f285
[ 38.515456] em28xx 1-3:1.0: EEPROM info:
[ 38.515458] em28xx 1-3:1.0: AC97 audio (5 sample rates)
[ 38.515460] em28xx 1-3:1.0: 500mA max power
[ 38.515462] em28xx 1-3:1.0: Table at offset 0x06, strings=0x1a9e, 0x346a, 0x0000
[ 38.586387] em28xx 1-3:1.0: Identified as Terratec Grabby (card=67)
[ 38.586392] em28xx 1-3:1.0: analog set to isoc mode.
[ 38.586503] em28xx 1-3:1.1: audio device (0ccd:10a7): interface 1, class 1
[ 38.586516] em28xx 1-3:1.2: audio device (0ccd:10a7): interface 2, class 1
[ 38.586543] usbcore: registered new interface driver em28xx
[ 38.599733] em28xx 1-3:1.0: Registering V4L2 extension
[ 38.629311] em28xx 1-3:1.0: Config register raw data: 0x50
[ 38.659140] em28xx 1-3:1.0: AC97 vendor ID = 0x83847650
[ 38.674111] em28xx 1-3:1.0: AC97 features = 0x6a90
[ 38.674114] em28xx 1-3:1.0: Empia 202 AC97 audio processor detected
[ 40.699171] em28xx 1-3:1.0: V4L2 video device registered as video0
[ 40.699174] em28xx 1-3:1.0: V4L2 VBI device registered as vbi0
[ 40.699176] em28xx 1-3:1.0: V4L2 extension successfully initialized
[ 40.699178] em28xx: Registered (Em28xx v4l2 Extension) extension
[1]: https://www.terratec.de/details.php?artnr=TERRATEC+G3
Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
[rebase https://patchwork.kernel.org/patch/902312/ on master]
Cc: linux-media@xxxxxxxxxxxxxxx
Signed-off-by: Paul Menzel <pmenzel@xxxxxxxxxxxxx>
---
drivers/media/usb/em28xx/em28xx-cards.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/media/usb/em28xx/em28xx-cards.c b/drivers/media/usb/em28xx/em28xx-cards.c
index a8c321d118279..ba6e65d0c2229 100644
--- a/drivers/media/usb/em28xx/em28xx-cards.c
+++ b/drivers/media/usb/em28xx/em28xx-cards.c
@@ -2618,6 +2618,8 @@ struct usb_device_id em28xx_id_table[] = {
.driver_info = EM2860_BOARD_TERRATEC_GRABBY },
{ USB_DEVICE(0x0ccd, 0x10AF),
.driver_info = EM2860_BOARD_TERRATEC_GRABBY },
+ { USB_DEVICE(0x0ccd, 0x10a7),
+ .driver_info = EM2860_BOARD_TERRATEC_GRABBY },
{ USB_DEVICE(0x0ccd, 0x00b2),
.driver_info = EM2884_BOARD_CINERGY_HTC_STICK },
{ USB_DEVICE(0x0fd9, 0x0018),
--
2.26.2
