On Sun, May 24, 2020 at 02:07:46PM +0200, Paul Menzel wrote: > Add the USB vendor and product ID of the TerraTec G3 [1], so Linux > detects the device. Does the device work, i.e. audio, composite and s-video? Or is it only detected? Thanks Sean > [ 38.093023] usb 1-3: new high-speed USB device number 4 using xhci_hcd > [ 38.240404] usb 1-3: config 1 interface 0 altsetting 1 endpoint 0x82 has invalid wMaxPacketSize 0 > [ 38.240408] usb 1-3: config 1 interface 0 altsetting 1 endpoint 0x84 has invalid wMaxPacketSize 0 > [ 38.240411] usb 1-3: config 1 interface 0 altsetting 2 endpoint 0x84 has invalid wMaxPacketSize 0 > [ 38.240413] usb 1-3: config 1 interface 0 altsetting 3 endpoint 0x84 has invalid wMaxPacketSize 0 > [ 38.240416] usb 1-3: config 1 interface 0 altsetting 4 endpoint 0x84 has invalid wMaxPacketSize 0 > [ 38.240418] usb 1-3: config 1 interface 0 altsetting 5 endpoint 0x84 has invalid wMaxPacketSize 0 > [ 38.240420] usb 1-3: config 1 interface 0 altsetting 6 endpoint 0x84 has invalid wMaxPacketSize 0 > [ 38.240423] usb 1-3: config 1 interface 0 altsetting 7 endpoint 0x84 has invalid wMaxPacketSize 0 > [ 38.255077] usb 1-3: New USB device found, idVendor=0ccd, idProduct=10a7, bcdDevice= 1.00 > [ 38.255080] usb 1-3: New USB device strings: Mfr=2, Product=1, SerialNumber=0 > [ 38.255082] usb 1-3: Product: TerraTec G3 > [ 38.255085] usb 1-3: Manufacturer: TerraTec Electronic GmbH > [ 38.286444] videodev: Linux video capture interface: v2.00 > [ 38.290861] em28xx 1-3:1.0: New device TerraTec Electronic GmbH TerraTec G3 @ 480 Mbps (0ccd:10a7, interface 0, class 0) > [ 38.290863] em28xx 1-3:1.0: Video interface 0 found: isoc > [ 38.349064] em28xx 1-3:1.0: chip ID is em2860 > [ 38.515453] em28xx 1-3:1.0: EEPROM ID = 1a eb 67 95, EEPROM hash = 0xd7a2f285 > [ 38.515456] em28xx 1-3:1.0: EEPROM info: > [ 38.515458] em28xx 1-3:1.0: AC97 audio (5 sample rates) > [ 38.515460] em28xx 1-3:1.0: 500mA max power > [ 38.515462] em28xx 1-3:1.0: Table at offset 0x06, strings=0x1a9e, 0x346a, 0x0000 > [ 38.586387] em28xx 1-3:1.0: Identified as Terratec Grabby (card=67) > [ 38.586392] em28xx 1-3:1.0: analog set to isoc mode. > [ 38.586503] em28xx 1-3:1.1: audio device (0ccd:10a7): interface 1, class 1 > [ 38.586516] em28xx 1-3:1.2: audio device (0ccd:10a7): interface 2, class 1 > [ 38.586543] usbcore: registered new interface driver em28xx > [ 38.599733] em28xx 1-3:1.0: Registering V4L2 extension > [ 38.629311] em28xx 1-3:1.0: Config register raw data: 0x50 > [ 38.659140] em28xx 1-3:1.0: AC97 vendor ID = 0x83847650 > [ 38.674111] em28xx 1-3:1.0: AC97 features = 0x6a90 > [ 38.674114] em28xx 1-3:1.0: Empia 202 AC97 audio processor detected > [ 40.699171] em28xx 1-3:1.0: V4L2 video device registered as video0 > [ 40.699174] em28xx 1-3:1.0: V4L2 VBI device registered as vbi0 > [ 40.699176] em28xx 1-3:1.0: V4L2 extension successfully initialized > [ 40.699178] em28xx: Registered (Em28xx v4l2 Extension) extension > > [1]: https://www.terratec.de/details.php?artnr=TERRATEC+G3 > > Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx> > [rebase https://patchwork.kernel.org/patch/902312/ on master] > Cc: linux-media@xxxxxxxxxxxxxxx > Signed-off-by: Paul Menzel <pmenzel@xxxxxxxxxxxxx> > --- > drivers/media/usb/em28xx/em28xx-cards.c | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/drivers/media/usb/em28xx/em28xx-cards.c b/drivers/media/usb/em28xx/em28xx-cards.c > index a8c321d118279..ba6e65d0c2229 100644 > --- a/drivers/media/usb/em28xx/em28xx-cards.c > +++ b/drivers/media/usb/em28xx/em28xx-cards.c > @@ -2618,6 +2618,8 @@ struct usb_device_id em28xx_id_table[] = { > .driver_info = EM2860_BOARD_TERRATEC_GRABBY }, > { USB_DEVICE(0x0ccd, 0x10AF), > .driver_info = EM2860_BOARD_TERRATEC_GRABBY }, > + { USB_DEVICE(0x0ccd, 0x10a7), > + .driver_info = EM2860_BOARD_TERRATEC_GRABBY }, > { USB_DEVICE(0x0ccd, 0x00b2), > .driver_info = EM2884_BOARD_CINERGY_HTC_STICK }, > { USB_DEVICE(0x0fd9, 0x0018), > -- > 2.26.2
