Sounds cool, let me know if I can help you with anything.
Thanks
Nameer
Hendrik Skarpeid wrote:
No luck here either, still working on it.
My plan is to solder som wires on strategic points on the board and
debug i2c and other activity with an oscilloscope. Will probably start
next week.
Nameer Kazzaz wrote:
Hey Igor,
I'm getting the same error:
dm1105 0000:04:0b.0: could not attach frontend
Did you get your one to work.
Thanks
Nameer
Igor M. Liplianin wrote:
On 18 февраля 2010, liplianin@xxxxx wrote:
I also got the unbranded dm1105 card. I tried the four possible i2c
addresses, just i case. Noen worked of course. Then I traced the i2c
pins on the tuner to pins 100 and 101 on the DM1105.
These are GPIO pins, so bit-banging i2c on these pins seems to be the
solution.
scl = p101 = gpio14
sda = p100 = gpio13
Here is the patch to test. Use option card=4.
modprobe dm1105 card=4
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
