On 23 февраля 2010 15:12:05 Nameer Kazzaz wrote: > Sounds cool, let me know if I can help you with anything. > > Thanks > Nameer > > Hendrik Skarpeid wrote: > > No luck here either, still working on it. > > My plan is to solder som wires on strategic points on the board and > > debug i2c and other activity with an oscilloscope. Will probably start > > next week. > > > > Nameer Kazzaz wrote: > >> Hey Igor, > >> I'm getting the same error: > >> dm1105 0000:04:0b.0: could not attach frontend > >> > >> Did you get your one to work. > >> > >> Thanks > >> Nameer > >> > >> Igor M. Liplianin wrote: > >>> On 18 февраля 2010, liplianin@xxxxx wrote: > >>>> I also got the unbranded dm1105 card. I tried the four possible i2c > >>>> addresses, just i case. Noen worked of course. Then I traced the i2c > >>>> pins on the tuner to pins 100 and 101 on the DM1105. > >>>> These are GPIO pins, so bit-banging i2c on these pins seems to be the > >>>> solution. > >>>> > >>>> scl = p101 = gpio14 > >>>> sda = p100 = gpio13 > >>> > >>> Here is the patch to test. Use option card=4. > >>> modprobe dm1105 card=4 I didn't test patch in real hardware. But I can connect GPIO14 and GPIO13 to SCL and SDA in any dm1105 card and test whether it works. Then I will ask you to test also. -- Igor M. Liplianin Microsoft Windows Free Zone - Linux used for all Computing Tasks -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html